AM43xx phy mode selection is similar to AM33xx platform, so adding only
the compatibility string to the driver
Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx>
---
Documentation/devicetree/bindings/net/cpsw-phy-sel.txt | 1 +
drivers/net/ethernet/ti/cpsw-phy-sel.c | 4 ++++
2 files changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt b/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt
index d9da911..764c0c7 100644
--- a/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt
+++ b/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt
@@ -4,6 +4,7 @@ TI CPSW Phy mode Selection Device Tree Bindings
Required properties:
- compatible : Should be "ti,am3352-cpsw-phy-sel" for am335x platform and
"ti,dra7xx-cpsw-phy-sel" for dra7xx platform
+ "ti,am43xx-cpsw-phy-sel" for am43xx platform
- reg : physical base address and size of the cpsw
registers map
- reg-names : names of the register map given in "reg" node
diff --git a/drivers/net/ethernet/ti/cpsw-phy-sel.c b/drivers/net/ethernet/ti/cpsw-phy-sel.c
index b93838d..aa8bf45 100644
--- a/drivers/net/ethernet/ti/cpsw-phy-sel.c
+++ b/drivers/net/ethernet/ti/cpsw-phy-sel.c
@@ -167,6 +167,10 @@ static const struct of_device_id cpsw_phy_sel_id_table[] = {
.compatible = "ti,dra7xx-cpsw-phy-sel",
.data = &cpsw_gmii_sel_dra7xx,
},
+ {
+ .compatible = "ti,am43xx-cpsw-phy-sel",
+ .data = &cpsw_gmii_sel_am3352,
+ },
{}
};
MODULE_DEVICE_TABLE(of, cpsw_phy_sel_id_table);
--
1.9.2.459.g68773ac
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
