This addresses a HW erratum on some QorIQ DPAA devices. MDIO reads to internal PCS registers may result in having the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and read data (MDIO_DATA[MDIO_DATA]) is correct. Software may get false read error when reading internal PCS registers through MDIO. As a workaround, all internal MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. When the issue was present, one could see such errors during boot: mdio_bus ffe4e5000: Error while reading PHY0 reg at 3.3 Madalin Bucur (3): dt-bindings: net: add fsl,erratum-a011043 powerpc/fsl/dts: add fsl,erratum-a011043 net/fsl: treat fsl,erratum-a011043 Documentation/devicetree/bindings/net/fsl-fman.txt | 13 +++++++++++++ .../boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi | 1 + .../boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi | 1 + drivers/net/ethernet/freescale/xgmac_mdio.c | 7 ++++++- 20 files changed, 37 insertions(+), 1 deletion(-) -- 2.1.0
