Hi Jian,
thank you for the update!
On Thu, Jan 16, 2020 at 9:04 AM Jian Hu <jian.hu@xxxxxxxxxxx> wrote:
>
> Compared with the previous SoCs, self-adaption current module
> is newly added for A1, and there is no reset parm except the
> fixed pll. In A1 PLL, the PLL enable sequence is different, using
> the new power-on sequence to enable the PLL.
>
> Signed-off-by: Jian Hu <jian.hu@xxxxxxxxxxx>
Acked-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
[...]
> @@ -323,13 +330,34 @@ static int meson_clk_pll_enable(struct clk_hw *hw)
> return 0;
>
> /* Make sure the pll is in reset */
> - meson_parm_write(clk->map, &pll->rst, 1);
> + if (MESON_PARM_APPLICABLE(&pll->rst))
> + meson_parm_write(clk->map, &pll->rst, 1);
>
> /* Enable the pll */
> meson_parm_write(clk->map, &pll->en, 1);
>
> /* Take the pll out reset */
> - meson_parm_write(clk->map, &pll->rst, 0);
> + if (MESON_PARM_APPLICABLE(&pll->rst))
> + meson_parm_write(clk->map, &pll->rst, 0);
> +
> + /*
> + * Compared with the previous SoCs, self-adaption current module
> + * is newly added for A1, keep the new power-on sequence to enable the
> + * PLL. The sequence is:
> + * 1. enable the pll, delay for 10us
> + * 2. enable the pll self-adaption current module, delay for 40us
> + * 3. enable the lock detect module
> + */
> + if (MESON_PARM_APPLICABLE(&pll->current_en)) {
> + udelay(10);
> + meson_parm_write(clk->map, &pll->current_en, 1);
> + udelay(40);
note to myself: first I thought that these have to be converted to ulseep_range
BUT: clk_enable can be called from atomic context, so the atomic
versions (udelay instead of usleep/usleep_range) are perfectly fine in
Jian's patch
Martin
