On Fri, 2020-01-17 at 10:30 +0000, Lee Jones wrote: > On Fri, 17 Jan 2020, Matti Vaittinen wrote: > > > Patch series introducing support for ROHM BD71828 PMIC > > > > ROHM BD71828 is a power management IC containing 7 bucks and 7 > > LDOs. All > > regulators can be controlled individually via I2C. Bucks 1,2,6 and > > 7 can also be assigned to a "regulator group" controlled by run- > > levels. > > Eg. Run level specific voltages and enable/disable statuses for > > each of > > these bucks can be set via register interface. The buck run-level > > group > > assignment (selection if buck is to be controlled individually or > > via > > run-levels) can be changed at run-time via I2C. > > > > This patch series brings only the basic support for controlling > > regulators individually via I2C. > > > > In addition to the bucks and LDOs there are: > > > > - The usual clk gate > > - 4 IO pins (mostly usable as GPO or tied to specific purpose) > > - power button support > > - RTC > > - two LEDs > > - battery charger > > - HALL sensor input > > > > This patch series adds support to regulators, clk, RTC, GPIOs and > > LEDs. > > > > Power-supply driver for charger is not included in this series. > > > > The series also adds LED DT-node lookup based on node name or given > > property name/value pair in LED core. It also adds generic default- > > state > > and default-trigger property handling to LED core. Follow-up > > patches > > simplifying few other LED drivers should follow. > > > > Changelog v10: > > - Split RTC patch to a BD70528 fix (which hopefully goes to 5.4) > > and to > > BD71828 support > > Still missing LED Acks. > Yep. I know. I haven't heard from Pavel recently and the patch 12 definitely requires his ack. Can you take the other patches in and leave 12 and 13 out for now? I can continue work on LEDs with Pavel but I would really like to have the regulators working and BD70528 RTC fixed in next release... Br, Matti Vaittinen
