[PATCH AUTOSEL 4.19 002/671] ARM: dts: at91: nattis: set the PRLUD and HIPOW signals low

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Peter Rosin <peda@xxxxxxxxxx>

[ Upstream commit 29feb2c960ab32fc24249443d4434194ce96f083 ]

AT91_PINCTRL_OUTPUT_VAL(0) without AT91_PINCTRL_OUTPUT is a no-op, so
make sure the pins really output a zero.

Fixes: 0e4323899973 ("ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power")
Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index af9f38456d04..bfa5815a0721 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -38,14 +38,16 @@
 						atmel,pins =
 							<AT91_PIOA 21
 							 AT91_PERIPH_GPIO
-							 AT91_PINCTRL_OUTPUT_VAL(0)>;
+							 (AT91_PINCTRL_OUTPUT |
+							  AT91_PINCTRL_OUTPUT_VAL(0))>;
 					};
 
 					pinctrl_lcd_hipow0: lcd_hipow0 {
 						atmel,pins =
 							<AT91_PIOA 23
 							 AT91_PERIPH_GPIO
-							 AT91_PINCTRL_OUTPUT_VAL(0)>;
+							 (AT91_PINCTRL_OUTPUT |
+							  AT91_PINCTRL_OUTPUT_VAL(0))>;
 					};
 				};
 			};
-- 
2.20.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux