On 09/05/14 02:36, Tony Lindgren wrote:
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap-panel-sharp-ls037v7dw01.dtsi
> @@ -0,0 +1,82 @@
> +/*
> + * Common file for omap dpi panels with QVGA and reset pins
> + *
> + * Note that the board specifc DTS file needs to specify
> + * at minimum the GPIO enable-gpios for display, and
> + * gpios for gpio-backlight.
> + */
This looks very board specific to me... The regulator and the use of
mcspi1 depend on the board, so this file can't be used on just any omap
board with the same panel. And this can (probably) only be used on
boards with a single display. Do those boards have tv-out?
So I have nothing against having common files, but shouldn't this be
named something more specific? If the boards involved are TI's OMAP3
development boards, maybe this should be something like...
omap3-ti-dev-panel-sharp-ls037v7dw01.dtsi. Well, that's a quite long one.
> +/ {
> + aliases {
> + display0 = &lcd0;
> + };
> +
> + backlight0: backlight {
> + compatible = "gpio-backlight";
> + };
> +
> + /* 3.3V GPIO controlled regulator for LCD_ENVDD */
> + lcd_3v3: regulator-lcd-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "lcd_3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + startup-delay-us = <70000>;
> + regulator-always-on;
Why always-on?
Tomi
Attachment:
signature.asc
Description: OpenPGP digital signature
