Re: [RFC PATCH v1 2/3] dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



See below.

On 1/15/20 4:18 PM, Rob Herring wrote:
> On Tue, Jan 14, 2020 at 3:38 PM Johan Jonker <jbx6244@xxxxxxxxx> wrote:
>>

> [...]
> 
>> diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
>> new file mode 100644
>> index 000000000..6f85a21d0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
>> @@ -0,0 +1,88 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Synopsys Designware Mobile Storage Host Controller Binding

[..]

>> +examples:
>> +  # The MSHC controller node can be split into two portions, SoC specific and
>> +  # board specific portions as listed below.
> 


> This split doesn't work because the examples are built and validated
> now. It may happen to because all the props are optional, but the
> board hunk goes unchecked. So please combine.
> 

Hi,

I have no knowledge about this particular hardware to give a realistic
example. Could someone advise here? Or should I just use the first
example for now?

Thanks

>> +  - |
>> +    dwmmc0@12200000 {
>> +      compatible = "snps,dw-mshc";
>> +      clocks = <&clock 351>, <&clock 132>;
>> +      clock-names = "biu", "ciu";
>> +      reg = <0x12200000 0x1000>;
>> +      interrupts = <0 75 0>;
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +      data-addr = <0x200>;
>> +      fifo-watermark-aligned;
>> +      resets = <&rst 20>;
>> +      reset-names = "reset";
>> +    };
>> +  # [board specific internal DMA resources]
>> +  - |
>> +    dwmmc0@12200000 {
>> +      clock-frequency = <400000000>;
>> +      clock-freq-min-max = <400000 200000000>;
>> +      broken-cd;
>> +      fifo-depth = <0x80>;
>> +      card-detect-delay = <200>;
>> +      vmmc-supply = <&buck8>;
>> +      bus-width = <8>;
>> +      cap-mmc-highspeed;
>> +      cap-sd-highspeed;
>> +    };
>> +  # [board specific generic DMA request binding]
>> +  - |
>> +    dwmmc0@12200000 {
>> +      clock-frequency = <400000000>;
>> +      clock-freq-min-max = <400000 200000000>;
>> +      broken-cd;
>> +      fifo-depth = <0x80>;
>> +      card-detect-delay = <200>;
>> +      vmmc-supply = <&buck8>;
>> +      bus-width = <8>;
>> +      cap-mmc-highspeed;
>> +      cap-sd-highspeed;
>> +      dmas = <&pdma 12>;
>> +      dma-names = "rx-tx";
>> +    };
>> --
>> 2.11.0
>>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux