Performance test of ethernet interface shows extremely low result: === w/o fix ================= Connecting to host 192.168.x.x, port 5201 [ 5] local 192.168.x.y port59020 connected to 192.168.x.x port 5201 ... [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 2.78 MBytes 2.33 Mbits/sec 337 sender [ 5] 0.00-10.00 sec 2.66 MBytes 2.23 Mbits/sec receiver ============================= Adding correct settings of the mdio bus with the respective phy fixes this issue. === after fix =============== iperf3 -c 192.168.x.x Connecting to host 192.168.x.x, port 5201 [ 5] local 192.168.x.y port 50702 connected to 192.168.x.x port 5201 ... [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 114 MBytes 95.4 Mbits/sec 56 sender [ 5] 0.00-10.00 sec 112 MBytes 94.1 Mbits/sec receiver ============================= Fixed: commit b326629f25b7 ("ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D support") Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@xxxxxxxxxxx> --- arch/arm/boot/dts/imx7-colibri.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index d05be3f0e2a7..7b6a7c124345 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -115,7 +115,20 @@ &fec1 { assigned-clock-rates = <0>, <100000000>; phy-mode = "rmii"; phy-supply = <®_LDO1>; + phy-handle = <ðphy0>; fsl,magic-packet; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + micrel,led-mode = <0>; + reg = <0>; + }; + }; }; &flexcan1 { -- 2.24.1