Define the Henninger board dependent part of the I2C2 device node. Add device nodes for Analog Devices ADV7180 video decoder and Renesas EEPROM connected to this I2C bus. Based on the Koelsch I2C2 device tree patch by Wolfram Sang. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx> --- This patch is against 'renesas-devel-v3.15-rc3-20140502' tag of Simon Horman's 'renesas.git' repo plus SDHI0/2, QSPI, and MSIOF0 DT support patches posted recently. arch/arm/boot/dts/r8a7791-henninger.dts | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts +++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts @@ -110,6 +110,11 @@ renesas,function = "sdhi2"; }; + i2c2_pins: i2c2 { + renesas,groups = "i2c2"; + renesas,function = "i2c2"; + }; + qspi_pins: spi0 { renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; @@ -170,6 +175,25 @@ status = "okay"; }; +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + video@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + }; + + eeprom@50 { + compatible = "24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + &qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html