Rockchip's new PCIe controller is based on DesignWare IP and the combo phy is shard by PCIe and USB3.0 controller. This series adds both of controller and phy drivers found on Rockchip RV1808 platform. Shawn Lin (3): dt-bindings: add binding for Rockchip combo phy using an Innosilicon IP PCI: dwc: Skip allocating own MSI domain if using external MSI domain MAINTAINERS: Update PCIe drivers for Rockchip Simon Xue (2): dt-bindings: rockchip: Add DesignWare based PCIe controller PCI: rockchip: add DesignWare based PCIe controller William Wu (1): phy/rockchip: inno-combophy: Add initial support .../devicetree/bindings/pci/rockchip-dw-pcie.yaml | 132 +++ .../bindings/phy/rockchip,inno-combophy.yaml | 84 ++ MAINTAINERS | 4 +- drivers/pci/controller/dwc/Kconfig | 9 + drivers/pci/controller/dwc/Makefile | 1 + drivers/pci/controller/dwc/pcie-designware-host.c | 10 +- drivers/pci/controller/dwc/pcie-designware.h | 1 + drivers/pci/controller/dwc/pcie-dw-rockchip.c | 441 ++++++++ drivers/phy/rockchip/Kconfig | 8 + drivers/phy/rockchip/Makefile | 1 + drivers/phy/rockchip/phy-rockchip-inno-combphy.c | 1056 ++++++++++++++++++++ 11 files changed, 1745 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml create mode 100644 Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml create mode 100644 drivers/pci/controller/dwc/pcie-dw-rockchip.c create mode 100644 drivers/phy/rockchip/phy-rockchip-inno-combphy.c -- 1.9.1