Re: [PATCH v2 13/17] dt-bindings: atmel-usart: remove wildcard

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 10, 2020 at 06:18:05PM +0200, Claudiu Beznea wrote:
> Remove chip whildcard and introduce the list of compatibles instead.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/mfd/atmel-usart.txt | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
> index 699fd3c9ace8..09013c49f6cc 100644
> --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt
> +++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
> @@ -1,10 +1,11 @@
>  * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
>  
>  Required properties for USART:
> -- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
> -  The compatible <chip> indicated will be the first SoC to support an
> -  additional mode or an USART new feature.
> -  For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart"
> +- compatible: Should be one of the following:
> +	- "atmel,at91rm9200-usart"
> +	- "atmel,at91sam9260-usart"
> +	- "atmel,at91rm9200-dbgu"
> +	- "atmel,at91sam9260-dbgu"

Should be:

"atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"
"atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"

>  - reg: Should contain registers location and length
>  - interrupts: Should contain interrupt
>  - clock-names: tuple listing input clock names.
> -- 
> 2.7.4
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux