Hi Stefan, how do you want the series merged? On 13/01/2020 19:56, Stefan Wahren wrote: > This series enables thermal support for the Raspberry Pi 4. Neither the > bcm2835_thermal nor the brcmstb_thermal are suitable for the BCM2711. > So add a new thermal driver to read out the SoC temperature from the > AVS RO block of the BCM2711. > > Changes in V5: > - git the rid of device member in private structure > - improve readability of bcm2711_get_temp > - avoid trace message in get_temp callback > > Changes in V4: > - change my email address to avoid spurious characters > > Changes in V3: > - add Rob's, Florian's and Nicolas' reviewed-by/tested-by > - adjust binding license > - make error pointer handling consistent > > Changes in V2: > - rebase on thermal/linux-next > - convert binding to YAML > - make AVS RO block a subnode of AVS monitor and access it via syscon > - drop unnecessary TSENS clock and get the rid of remove callback > - add Florian's reviewed-by to last/unchanged patch > > Stefan Wahren (4): > dt-bindings: Add Broadcom AVS RO thermal > thermal: Add BCM2711 thermal driver > ARM: dts: bcm2711: Enable thermal > ARM: configs: Build BCM2711 thermal as module > > .../bindings/thermal/brcm,avs-ro-thermal.yaml | 45 ++++++++ > arch/arm/boot/dts/bcm2711.dtsi | 12 ++ > arch/arm/configs/multi_v7_defconfig | 1 + > arch/arm64/configs/defconfig | 1 + > drivers/thermal/broadcom/Kconfig | 7 ++ > drivers/thermal/broadcom/Makefile | 1 + > drivers/thermal/broadcom/bcm2711_thermal.c | 123 +++++++++++++++++++++ > 7 files changed, 190 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml > create mode 100644 drivers/thermal/broadcom/bcm2711_thermal.c > -- <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
