This enables thermal for the BCM2711 (used on Raspberry Pi 4) by adding the AVS monitor and a subnode for the thermal part. Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx> --- arch/arm/boot/dts/bcm2711.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 961bed8..96f341d 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -66,6 +66,17 @@ IRQ_TYPE_LEVEL_HIGH)>; }; + avs_monitor: avs-monitor@7d5d2000 { + compatible = "brcm,bcm2711-avs-monitor", + "syscon", "simple-mfd"; + reg = <0x7d5d2000 0xf00>; + + thermal: thermal { + compatible = "brcm,bcm2711-thermal"; + #thermal-sensor-cells = <0>; + }; + }; + dma: dma@7e007000 { compatible = "brcm,bcm2835-dma"; reg = <0x7e007000 0xb00>; @@ -363,6 +374,7 @@ &cpu_thermal { coefficients = <(-487) 410040>; + thermal-sensors = <&thermal>; }; &dsi0 { -- 2.7.4