Re: [PATCH v10 03/15] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

On 05/08/2014 05:35 PM, Maxime Ripard wrote:
> On Thu, May 08, 2014 at 02:30:55PM +0200, Hans de Goede wrote:
>> Hi,
>>
>> On 05/08/2014 02:17 PM, Ulf Hansson wrote:
>>> On 8 May 2014 13:26, Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
>>>> Hi,
>>>>
>>>> On 05/05/2014 10:33 PM, Ulf Hansson wrote:
>>>>> [snip]
>>>>>
>>>>>> On 05/05/2014 02:41 PM, Ulf Hansson wrote:
>>>>>>>> +struct sunxi_mmc_host {
>>>>>>>> +       struct mmc_host *mmc;
>>>>>>>> +       struct regulator *vmmc;
>>>>>>>
>>>>>>> Instead of having a specific regulator for this driver, please use the
>>>>>>> mmc_regulator_get_supply API.
>>>>>>
>>>>>> We cannot use mmc_regulator_get_supply because for the sunxi mmc controller
>>>>>> not only vqmmc but also vmmc itself is optional, and mmc_regulator_get_supply
>>>>>> calls devm_regulator_get rather then devm_regulator_get_optional for vmmc.
>>>>>
>>>>> Is that because the mmc controller handle the power to the card or
>>>>> because you have a fixed supply?
>>>>>
>>>>> Having a fixed regulator supply could easily be set up in DT, which
>>>>> then also dynamically gives you the ocr mask instead of having a them
>>>>> "hard coded".
>>>>
>>>> It is because the sdcard slot power tends to be hooked directly to the 3.3V
>>>> of the board. So in a sense this is a fixed regulator, but I really, REALLY
>>>> don't want to add fixed regulator boilerplate to all sunxi dts files for this.
>>>
>>> So, how would you then distinguish between let's say a 3.1V and 3.3V
>>> fixed regulator? That is something that is board specific, thus I
>>> don't think you can get away from not adding them to DT.
>>
>> All boards I've seen sofar use 3.3V which seems sensible since that is
>> what the spec says you must supply to SDSC cards. I agree that if a board
>> differs from the standard 3.3V, a fixed regulator node specifying the
>> voltage should be added.
> 
> I think we introduced the sunxi-regulators DTSI just for this :)
> 
> I'd really like to start stabilizing a bit the DT and at least
> consider being able to use an older DT on a newer kernel. If we take
> such approach, I'm afraid it will break at some point.

Ok, I'll do some patches on top of the mmc patches you've already merged
adding a vmmc regulator to all boards.

Regards,

Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux