An experimental test with the command below gives this error:
rk3188-bqedison2qc.dt.yaml: dwmmc@10218000: wifi@1:
'reg' is a required property
So fix this by adding a reg property to the brcmf sub node.
Also add #address-cells and #size-cells to prevent more warnings.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
---
arch/arm/boot/dts/rk3188-bqedison2qc.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index c8b62bbd6..ad1afd403 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -466,9 +466,12 @@
pinctrl-names = "default";
pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
vmmcq-supply = <&vccio_wl>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
brcmf: wifi@1 {
+ reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&gpio3>;
interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>;
--
2.11.0
