Hi, I hope everyone went well into new year, are there any open issues left here preveting applying these patches? On Fri, 20 Dec 2019 13:24:11 +0100 Andreas Kemnade <andreas@xxxxxxxxxxxx> wrote: > In the variant RC5T619 the mfd has an RTC. This patchset adds > support for it. To do so it adds the missing register defines in > rn5t618.h and general irq handling for that. > It seems that the irq definitions are the same except missing RTC missing words ... for the rn5t618 ... > but due to missing ability to test that I do not add them here. > > The rtc driver itself is based on > https://github.com/kobolabs/Kobo-Reader/blob/master/hw/imx6sll-clara/kernel.tar.bz2 > but heavily reworked. > > It was tested on the Kobo Clara HD. > > For cleaning up there is a separate off-topic patch: > mfd: rn5t618: cleanup i2c_device_id > > Changes in v5: > - static rn5t618_irq_init > - PLATFORM_DEVID_NONE > - added some Acked-Bys > > Changes in v4: > - use macros for IRQ definitions > - merge rn5t618-core.c and rn5t618-irq.c > > Changes in v3: > - alignment cleanup > - output cleanup, remove useless toggling of alarm flag in rtc probe > - updated bindings description, so patch 1/5 becomes 2/6 and so on > > Changes in v2: > - no dead code in irq code > - various improvements and cleanups in rtc driver itself > > Andreas Kemnade (5): > dt-bindings: mfd: rn5t618: Document optional property interrupts > mfd: rn5t618: add IRQ support > mfd: rn5t618: add RTC related registers > mfd: rn5t618: add more subdevices > rtc: rc5t619: add ricoh rc5t619 RTC driver > > Documentation/devicetree/bindings/mfd/rn5t618.txt | 4 + > drivers/mfd/Kconfig | 1 + > drivers/mfd/rn5t618.c | 109 +++++- > drivers/rtc/Kconfig | 10 + > drivers/rtc/Makefile | 1 + > drivers/rtc/rtc-rc5t619.c | 444 ++++++++++++++++++++++ > include/linux/mfd/rn5t618.h | 26 ++ > 7 files changed, 593 insertions(+), 2 deletions(-) > create mode 100644 drivers/rtc/rtc-rc5t619.c > > -- > 2.11.0 > >
