Hi,
this is just a short review I did not check all details. Since this is a
v2 you should say what you changed.
Regards,
Marco
On 20-01-08 14:29, fengping yu wrote:
> From: "fengping.yu" <fengping.yu@xxxxxxxxxxxx>
>
> add mtk keypad driver
Hm.. can you explain it a bit more?
> Change-Id: I20bb26ee4112f51f60476b7ff7d6e42b43f729dc
> Signed-off-by: fengping.yu <fengping.yu@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/input/mtk-kpd.txt | 13 +-
> arch/arm64/configs/defconfig | 1 +
> drivers/input/keyboard/Kconfig | 8 +
> drivers/input/keyboard/Makefile | 1 +
> drivers/input/keyboard/mtk-kpd.c | 357 ++++++++++++++++++
> 5 files changed, 377 insertions(+), 3 deletions(-)
> create mode 100644 drivers/input/keyboard/mtk-kpd.c
>
> diff --git a/Documentation/devicetree/bindings/input/mtk-kpd.txt b/Documentation/devicetree/bindings/input/mtk-kpd.txt
> index 2af81e696159..e3c17513c02c 100644
> --- a/Documentation/devicetree/bindings/input/mtk-kpd.txt
> +++ b/Documentation/devicetree/bindings/input/mtk-kpd.txt
> @@ -38,8 +38,15 @@ Example:
> };
>
> &keypad {
> - mediatek,key-debounce-ms = <1024>;
> + mediatek,key-debounce-ms = <32>;
> /*HW Keycode [0~71] -> Linux Keycode*/
> - mediatek,khw-map-num = <72>;
> - mediatek,hw-init-map = <114 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 >;
> + mediatek,hw-map-num = <72>;
> + mediatek,hw-init-map = <114 0 0 0 0 0 0 0 0
> + 0 0 0 0 0 0 0 0 0
> + 0 0 0 0 0 0 0 0 0
> + 0 0 0 0 0 0 0 0 0
> + 0 0 0 0 0 0 0 0 0
> + 0 0 0 0 0 0 0 0 0
> + 0 0 0 0 0 0 0 0 0
> + 0 0 0 0 0 0 0 0 0 >;
> };
This should be part of patch 1.
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 8e05c39eab08..62bed77ec127 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -315,6 +315,7 @@ CONFIG_KEYBOARD_ADC=m
> CONFIG_KEYBOARD_GPIO=y
> CONFIG_KEYBOARD_SNVS_PWRKEY=m
> CONFIG_KEYBOARD_CROS_EC=y
> +CONFIG_KEYBOARD_MTK=y
> CONFIG_INPUT_TOUCHSCREEN=y
> CONFIG_TOUCHSCREEN_ATMEL_MXT=m
> CONFIG_INPUT_MISC=y
This should be a extra patch.
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 8911bc2ec42a..01747a97536b 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -775,4 +775,12 @@ config KEYBOARD_MTK_PMIC
> To compile this driver as a module, choose M here: the
> module will be called pmic-keys.
>
> +config KEYBOARD_MTK
> + tristate "MediaTek Keypad Support"
> + help
> + Say Y here if you want to use the keypad.
> + If unuse, say N.
> + To compile this driver as a module, choose M here: the
> + module will be called mtk-kpd.
> +
> endif
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index 9510325c0c5d..daa654bcce6e 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -41,6 +41,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
> obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
> obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o
> obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o
> +obj-$(CONFIG_KEYBOARD_MTK) += mtk-kpd.o
> obj-$(CONFIG_KEYBOARD_MTK_PMIC) += mtk-pmic-keys.o
> obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
> obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o
> diff --git a/drivers/input/keyboard/mtk-kpd.c b/drivers/input/keyboard/mtk-kpd.c
> new file mode 100644
> index 000000000000..740a58b44dac
> --- /dev/null
> +++ b/drivers/input/keyboard/mtk-kpd.c
> @@ -0,0 +1,357 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 MediaTek Inc.
> + * Author Terry Chang <terry.chang@xxxxxxxxxxxx>
> + */
> +#include <linux/atomic.h>
> +#include <linux/clk.h>
> +#include <linux/debugfs.h>
> +#include <linux/delay.h>
> +#include <linux/fs.h>
> +#include <linux/gpio.h>
> +#include <linux/init.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/ioctl.h>
> +#include <linux/kernel.h>
> +#include <linux/miscdevice.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_wakeup.h>
> +#include <linux/regmap.h>
> +#include <linux/timer.h>
> +#include <linux/workqueue.h>
Please check if you need all these includes at least the workqueue isn't
required.
> +#define KPD_NAME "mtk-kpd"
> +
> +#define KP_STA (0x0000)
> +#define KP_MEM1 (0x0004)
> +#define KP_MEM2 (0x0008)
> +#define KP_MEM3 (0x000c)
> +#define KP_MEM4 (0x0010)
> +#define KP_MEM5 (0x0014)
> +#define KP_DEBOUNCE (0x0018)
> +#define KP_SEL (0x0020)
> +#define KP_EN (0x0024)
> +
> +#define KP_COL0_SEL (1 << 10)
> +#define KP_COL1_SEL (1 << 11)
> +#define KP_COL2_SEL (1 << 12)
> +
> +#define KPD_DEBOUNCE_MASK ((1U << 14) - 1)
> +#define KPD_DOUBLE_KEY_MASK (1U << 0)
> +
> +#define KPD_NUM_MEMS 5
> +#define KPD_MEM5_BITS 8
> +#define KPD_NUM_KEYS 72 /* 4 * 16 + KPD_MEM5_BITS */
> +
> +struct mtk_keypad {
> + struct input_dev *input_dev;
> + struct wakeup_source *suspend_lock;
> + struct tasklet_struct tasklet;
Why do you use a tasklet instead of a simple softirq?
> + struct clk *clk;
> + void __iomem *base;
> + unsigned int irqnr;
> + u32 key_debounce;
> + u32 hw_map_num;
> + u32 hw_init_map[KPD_NUM_KEYS];
> + u16 keymap_state[KPD_NUM_MEMS];
> +};
> +
> +/* for keymap handling */
> +static void kpd_keymap_handler(unsigned long data);
> +
> +static int kpd_pdrv_probe(struct platform_device *pdev);
Why do you delcare these functions here?
> +static void kpd_get_keymap_state(void __iomem *kp_base, u16 state[])
> +{
> + state[0] = readw(kp_base + KP_MEM1);
> + state[1] = readw(kp_base + KP_MEM2);
> + state[2] = readw(kp_base + KP_MEM3);
> + state[3] = readw(kp_base + KP_MEM4);
> + state[4] = readw(kp_base + KP_MEM5);
> + pr_debug("kpd register = %x %x %x %x %x\n",
> + state[0], state[1], state[2], state[3], state[4]);
> +}
> +
> +static void kpd_keymap_handler(unsigned long data)
> +{
> + int i, j;
> + int pressed;
> + u16 new_state[KPD_NUM_MEMS], change, mask;
> + u16 hw_keycode, keycode;
> + void *dest;
> + struct mtk_keypad *keypad = (struct mtk_keypad *)data;
> +
> + kpd_get_keymap_state(keypad->base, new_state);
> +
> + __pm_wakeup_event(keypad->suspend_lock, 500);
> +
> + for (i = 0; i < KPD_NUM_MEMS; i++) {
> + change = new_state[i] ^ keypad->keymap_state[i];
> + if (!change)
> + continue;
> +
> + for (j = 0; j < 16U; j++) {
> + mask = (u16)1 << j;
> + if (!(change & mask))
> + continue;
> +
> + hw_keycode = (i << 4) + j;
> +
> + if (hw_keycode >= KPD_NUM_KEYS)
> + continue;
> +
> + /* bit is 1: not pressed, 0: pressed */
> + pressed = (new_state[i] & mask) == 0U;
> + pr_debug("(%s) HW keycode = %d\n",
> + (pressed) ? "pressed" : "released",
> + hw_keycode);
> +
> + keycode = keypad->hw_init_map[hw_keycode];
> + if (!keycode)
> + continue;
> + input_report_key(keypad->input_dev, keycode, pressed);
> + input_sync(keypad->input_dev);
> + pr_debug("report Linux keycode = %d\n", keycode);
> + }
> + }
> +
> + dest = memcpy(keypad->keymap_state, new_state, sizeof(new_state));
> + enable_irq(keypad->irqnr);
> +}
> +
> +static irqreturn_t kpd_irq_handler(int irq, void *dev_id)
> +{
> + /* use _nosync to avoid deadlock */
> + struct mtk_keypad *keypad = dev_id;
> +
> + disable_irq_nosync(keypad->irqnr);
> + tasklet_schedule(&keypad->tasklet);
> + return IRQ_HANDLED;
> +}
> +
> +static int kpd_get_dts_info(struct mtk_keypad *keypad,
> + struct device_node *node)
> +{
> + int ret;
> +
> + ret = of_property_read_u32(node, "mediatek,key-debounce-ms",
> + &keypad->key_debounce);
> + if (ret) {
> + pr_debug("read mediatek,key-debounce-ms error.\n");
> + return ret;
> + }
> +
> + ret = of_property_read_u32(node, "mediatek,hw-map-num",
> + &keypad->hw_map_num);
> + if (ret) {
> + pr_debug("read mediatek,hw-map-num error.\n");
> + return ret;
> + }
> +
> + if (keypad->hw_map_num > KPD_NUM_KEYS) {
> + pr_debug("hw-map-num error, it cannot bigger than %d.\n",
> + KPD_NUM_KEYS);
> + return -EINVAL;
> + }
> +
> + ret = of_property_read_u32_array(node, "mediatek,hw-init-map",
> + keypad->hw_init_map,
> + keypad->hw_map_num);
> +
> + if (ret) {
> + pr_debug("hw-init-map was not defined in dts.\n");
> + return ret;
> + }
> +
> + pr_debug("deb= %d\n", keypad->key_debounce);
> +
> + return 0;
> +}
> +
> +static int kpd_gpio_init(struct device *dev)
> +{
> + struct pinctrl *keypad_pinctrl;
> + struct pinctrl_state *kpd_default;
> +
> + keypad_pinctrl = devm_pinctrl_get(dev);
> + if (IS_ERR(keypad_pinctrl)) {
> + pr_debug("Cannot find keypad_pinctrl!\n");
> +
> + return (int)PTR_ERR(keypad_pinctrl);
> + }
> +
> + kpd_default = pinctrl_lookup_state(keypad_pinctrl, "default");
> + if (IS_ERR(kpd_default)) {
> + pr_debug("Cannot find ecall_state!\n");
> +
> + return (int)PTR_ERR(kpd_default);
> + }
> +
> + return pinctrl_select_state(keypad_pinctrl,
> + kpd_default);
> +}
> +
> +static int kpd_pdrv_probe(struct platform_device *pdev)
> +{
> + struct mtk_keypad *keypad;
> + struct resource *res;
> + int i;
> + int err;
> +
> + keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
> + if (!keypad)
> + return -ENOMEM;
> +
> + keypad->clk = devm_clk_get(&pdev->dev, "kpd");
> + if (IS_ERR(keypad->clk)) {
> + pr_notice("get kpd-clk fail: %d\n", (int)PTR_ERR(keypad->clk));
> + return (int)PTR_ERR(keypad->clk);
> + }
There is no need to cast it to (int).
> +
> + err = clk_prepare_enable(keypad->clk);
> + if (err) {
> + pr_notice("kpd-clk prepare enable failed.\n");
> + return err;
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + err = -ENODEV;
> + goto err_unprepare_clk;
> + }
> +
> + keypad->base = devm_ioremap(&pdev->dev, res->start,
> + resource_size(res));
> + if (!keypad->base) {
> + pr_notice("KP iomap failed\n");
> + err = -EBUSY;
> + goto err_unprepare_clk;
> + }
> +
> + keypad->irqnr = irq_of_parse_and_map(pdev->dev.of_node, 0);
> + if (!keypad->irqnr) {
> + pr_notice("KP get irqnr failed\n");
> + err = -ENODEV;
> + goto err_unprepare_clk;
> + }
> +
> + pr_info("kp base: 0x%p, addr:0x%p, kp irq: %d\n",
> + keypad->base, &keypad->base, keypad->irqnr);
Can we move that to pr_info.
> + err = kpd_gpio_init(&pdev->dev);
This can be done here too but is jsut a nitpick.
> + if (err) {
> + pr_debug("gpio init failed\n");
> + goto err_unprepare_clk;
> + }
> +
> + err = kpd_get_dts_info(keypad, pdev->dev.of_node);
> + if (err) {
> + pr_debug("get dts info failed.\n");
> + goto err_unprepare_clk;
> + }
> +
> + memset(keypad->keymap_state, 0xff, sizeof(keypad->keymap_state));
> +
> + keypad->input_dev = devm_input_allocate_device(&pdev->dev);
> + if (!keypad->input_dev) {
> + pr_notice("input allocate device fail.\n");
> + err = -ENOMEM;
> + goto err_unprepare_clk;
> + }
> +
> + keypad->input_dev->name = KPD_NAME;
> + keypad->input_dev->id.bustype = BUS_HOST;
> + keypad->input_dev->dev.parent = &pdev->dev;
> +
> + __set_bit(EV_KEY, keypad->input_dev->evbit);
> +
> + for (i = 0; i < KPD_NUM_KEYS; i++) {
> + if (keypad->hw_init_map[i])
> + __set_bit(keypad->hw_init_map[i],
> + keypad->input_dev->keybit);
> + }
> +
> + err = input_register_device(keypad->input_dev);
> + if (err) {
> + pr_notice("register input device failed (%d)\n", err);
> + goto err_unprepare_clk;
> + }
> +
> + input_set_drvdata(keypad->input_dev, keypad);
> +
> + keypad->suspend_lock = wakeup_source_register(NULL, "kpd wakelock");
> + if (!keypad->suspend_lock) {
> + pr_notice("wakeup source init failed.\n");
> + err = -ENOMEM;
> + goto err_unregister_device;
> + }
What if someone won't use this device as wakeup source?
> + tasklet_init(&keypad->tasklet, kpd_keymap_handler,
> + (unsigned long)keypad);
> +
> + writew((u16)(keypad->key_debounce & KPD_DEBOUNCE_MASK),
> + keypad->base + KP_DEBOUNCE);
> +
> + /* register IRQ */
> + err = request_irq(keypad->irqnr, kpd_irq_handler, IRQF_TRIGGER_NONE,
> + KPD_NAME, keypad);
> + if (err) {
> + pr_notice("register IRQ failed (%d)\n", err);
> + goto err_irq;
> + }
> +
> + pr_info("kpd_probe OK.\n");
> +
> + return 0;
> +
> +err_irq:
> + tasklet_kill(&keypad->tasklet);
> + wakeup_source_unregister(keypad->suspend_lock);
> +
> +err_unregister_device:
> + input_unregister_device(keypad->input_dev);
> +
> +err_unprepare_clk:
> + clk_disable_unprepare(keypad->clk);
> +
> + return err;
> +}
> +
> +static int kpd_pdrv_remove(struct platform_device *pdev)
> +{
> + struct mtk_keypad *keypad = platform_get_drvdata(pdev);
> +
> + tasklet_kill(&keypad->tasklet);
> + wakeup_source_unregister(keypad->suspend_lock);
> + input_unregister_device(keypad->input_dev);
> + clk_disable_unprepare(keypad->clk);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id kpd_of_match[] = {
> + {.compatible = "mediatek,mt6779-keypad"},
> + {.compatible = "mediatek,kp"},
> + {},
> +};
> +
> +static struct platform_driver kpd_pdrv = {
> + .probe = kpd_pdrv_probe,
> + .remove = kpd_pdrv_remove,
> + .driver = {
> + .name = KPD_NAME,
> + .of_match_table = kpd_of_match,
> + },
Please align this correct.
> +};
> +
> +module_platform_driver(kpd_pdrv);
> +
> +MODULE_AUTHOR("Mediatek Corporation");
> +MODULE_DESCRIPTION("MTK Keypad (KPD) Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.18.0
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
