On Wed, Mar 26, 2014 at 6:59 AM, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Wed, Mar 26, 2014 at 4:27 AM, Linus Walleij <linus.walleij@xxxxxxxxxx> wrote:
>> + if (of_machine_is_compatible("arm,realview-eb"))
>> + /*
>> + * 1MB (128KB/way), 8-way associativity,
>> + * evmon/parity/share enabled
>> + * Bits: .... ...0 0111 1001 0000 .... .... ....
>> + */
>> + l2x0_of_init(0x00790000, 0xfe000fff);
>> + else if (of_machine_is_compatible("arm,realview-pb1176"))
>> + /*
>> + * 128Kb (16Kb/way) 8-way associativity.
>> + * evmon/parity/share enabled.
>> + */
>> + l2x0_of_init(0x00730000, 0xfe000fff);
>> + else if (of_machine_is_compatible("arm,realview-pb11mp"))
>> + /*
>> + * 1MB (128KB/way), 8-way associativity,
>> + * evmon/parity/share enabled
>> + * Bits: .... ...0 0111 1001 0000 .... .... ....
>> + */
>> + l2x0_of_init(0x00730000, 0xfe000fff);
>> + else if (of_machine_is_compatible("arm,realview-pbx"))
>> + /*
>> + * 16KB way size, 8-way associativity, parity disabled
>> + * Bits: .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... ....
>> + */
>> + l2x0_of_init(0x02520000, 0xc0000fff);
>> +#endif
>
> As Arnd pointed out, see Russell's recent L2x0 emails. Since these are
> L220s, you do need the way size and associativity to be initialized at
> least. There are standard ePAPR definitions for these which should be
> used.
>
> Documenting the initial and final aux ctrl values on these platforms
> would be helpful for Russell's clean-up.
The PB1176 board has the initial value:
L2X0_AUX_CTRL = 0x02020fff
I don't know how I can help out best here unfortunately, it's a little
bit of a moving target I guess and admittedly my understanding of
l2x0 is pretty shallow. :-/
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
