On Fri, 2020-01-03 at 18:23 +0100, Stefan Wahren wrote: > This series enables thermal support for the Raspberry Pi 4. Neither the > bcm2835_thermal nor the brcmstb_thermal are suitable for the BCM2711. > So add a new thermal driver to read out the SoC temperature from the > AVS RO block of the BCM2711. > > Changes in V2: > - rebase on thermal/linux-next > - convert binding to YAML > - make AVS RO block a subnode of AVS monitor and access it via syscon > - drop unnecessary TSENS clock and get the rid of remove callback > - add Florian's reviewed-by to last/unchanged patch > > Stefan Wahren (4): > dt-bindings: Add Broadcom AVS RO thermal > thermal: Add BCM2711 thermal driver > ARM: dts: bcm2711: Enable thermal > ARM: configs: Build BCM2711 thermal as module > > .../bindings/thermal/brcm,avs-ro-thermal.yaml | 45 +++++++ > arch/arm/boot/dts/bcm2711.dtsi | 12 ++ > arch/arm/configs/multi_v7_defconfig | 1 + > arch/arm64/configs/defconfig | 1 + > drivers/thermal/broadcom/Kconfig | 7 ++ > drivers/thermal/broadcom/Makefile | 1 + > drivers/thermal/broadcom/bcm2711_thermal.c | 129 > +++++++++++++++++++++ > 7 files changed, 196 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/brcm,avs-ro- > thermal.yaml > create mode 100644 drivers/thermal/broadcom/bcm2711_thermal.c > > -- > 2.7.4 > Minus the small changes mentioned you can add my: Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx> Many Thanks! Nicolas
Attachment:
signature.asc
Description: This is a digitally signed message part
