RE: [PATCH V3 1/3] dt-bindings: imx: Add pinctrl binding doc for i.MX8MP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Rob

> Subject: Re: [PATCH V3 1/3] dt-bindings: imx: Add pinctrl binding doc for
> i.MX8MP
> 
> On Mon, Jan 06, 2020 at 05:29:50PM +0800, Anson Huang wrote:
> > Add binding doc for i.MX8MP pinctrl driver.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> > Reviewed-by: Abel Vesa <abel.vesa@xxxxxxx>
> > ---
> > Changes since V2:
> > 	- use DT schema instead of txt for binding doc.
> > ---
> >  .../bindings/pinctrl/fsl,imx8mp-pinctrl.yaml       |  65 ++
> >  arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h     | 931
> +++++++++++++++++++++
> >  2 files changed, 996 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
> >  create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
> >
> > diff --git
> > a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
> > b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
> > new file mode 100644
> > index 0000000..cdb6c21
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yam
> > +++ l
> > @@ -0,0 +1,65 @@
> > +# SPDX-License-Identifier: GPL-2.0-or-later %YAML 1.2
> > +---
> > +$id:
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> > +cetree.org%2Fschemas%2Fpinctrl%2Ffsl%2Cimx8mp-
> pinctrl.yaml%23&amp;dat
> >
> +a=02%7C01%7Canson.huang%40nxp.com%7Cfacd4426e6e54bc5416b08d79
> 2f59319%
> >
> +7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C63713945576195750
> 5&amp;s
> >
> +data=0O3w1U6vs9xVq6B%2BhyT4Nz5HdKuk6XDymPUg7wQy0lM%3D&amp;
> reserved=0
> > +$schema:
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> > +cetree.org%2Fmeta-
> schemas%2Fcore.yaml%23&amp;data=02%7C01%7Canson.hua
> >
> +ng%40nxp.com%7Cfacd4426e6e54bc5416b08d792f59319%7C686ea1d3bc2b
> 4c6fa92
> >
> +cd99c5c301635%7C0%7C0%7C637139455761957505&amp;sdata=XUN%2BG
> zMOqpVNRj
> > +UM1CO6CXPOMT72DtdefLs%2Bs%2BGPaGI%3D&amp;reserved=0
> > +
> > +title: Freescale IMX8MP IOMUX Controller
> > +
> > +maintainers:
> > +  - Anson Huang <Anson.Huang@xxxxxxx>
> > +
> > +description:
> > +  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in
> > +this directory
> > +  for common binding part and usage.
> > +
> > +properties:
> > +  compatible:
> > +    const: fsl,imx8mp-iomuxc
> > +
> > +# Client device subnode's properties
> > +patternProperties:
> > +  '-grp$':
> > +    type: object
> > +    description:
> > +      Pinctrl node's client devices use subnodes for desired pin configuration.
> > +      Client device subnodes use below standard properties.
> > +
> > +    properties:
> > +      fsl,pins:
> > +        $ref: /schemas/types.yaml#/definitions/string
> 
> string or...
> 
> > +        description:
> > +          each entry consists of 6 integers and represents the mux
> > + and config
> 
> integers?

I think it should be uint32-array

> 
> > +          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
> > +          mux_val input_val> are specified using a PIN_FUNC_ID macro, which
> can
> > +          be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>.
> The last
> > +          integer CONFIG is the pad setting value like pull-up on this pin.
> Please
> > +          refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
> > +
> > +    required:
> > +      - fsl,pins
> > +
> > +    additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  # Pinmux controller node
> > +  - |
> > +    iomuxc: pinctrl@30330000 {
> > +        compatible = "fsl,imx8mp-iomuxc";
> > +        reg = <0x30330000 0x10000>;
> > +
> > +        pinctrl_uart2: uart2grp {
> > +            fsl,pins = <
> > +                MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x49
> > +                MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x49
> 
> Run 'make dt_binding_check'. Doesn't build:
> 
> Error: Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-
> pinctrl.example.dts:23.21-22 syntax error FATAL ERROR: Unable to parse
> input tree

I fix it by NOT using Macro Definition as below, but still have some build error which looks like
my environment issue, please help review V4, thanks.

             fsl,pins = <
                 0x228 0x488 0x5F0 0x0 0x6       0x49
                 0x228 0x488 0x000 0x0 0x0       0x49
             >;


  CHKDT   Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
  SCHEMA  Documentation/devicetree/bindings/processed-schema.yaml
  DTC     Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.example.dt.yaml
FATAL ERROR: Unknown output format "yaml"
scripts/Makefile.lib:310: recipe for target 'Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.example.dt.yaml' failed
make[1]: *** [Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.example.dt.yaml] Error 1
make[1]: *** Deleting file 'Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.example.dt.yaml'
Makefile:1263: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2


Thanks,
Anson




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux