Hi Helen, Thank you for the patch. On Fri, Dec 27, 2019 at 05:01:13PM -0300, Helen Koike wrote: > Add yaml DT bindings for Rockchip ISP1. > > This was tested and verified with: > mv drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.yaml Documentation/devicetree/bindings/media/ > make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-isp1.yaml > make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-isp1.yaml > > Signed-off-by: Helen Koike <helen.koike@xxxxxxxxxxxxx> > > --- > > Changes in v12: > - The commit replaces the following commit in previous series named > media: staging: dt-bindings: Document the Rockchip ISP1 bindings > This new patch adds yaml binding and was verified with > make dtbs_check and make dt_binding_check > > Changes in v11: > - add clock-names values > > Changes in v10: > - unsquash > > Changes in v9: > - squash > - move to staging > > Changes in v8: > - fix title division style > > Changes in v7: > - update document with new design and tested example > > .../bindings/media/rockchip-isp1.yaml | 193 ++++++++++++++++++ > 1 file changed, 193 insertions(+) > create mode 100644 drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.yaml > > diff --git a/drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.yaml b/drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.yaml > new file mode 100644 > index 000000000000..4d1b2c67a4cd > --- /dev/null > +++ b/drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.yaml > @@ -0,0 +1,193 @@ > +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/rockchip-isp1.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Rockchip SoC Image Signal Processing unit v1 > + > +maintainers: > + - Helen Koike <helen.koike@xxxxxxxxxxxxx> > + > +description: | > + Rockchip ISP1 is the Camera interface for the Rockchip series of SoCs > + which contains image processing, scaling, and compression funcitons. > + > +properties: > + compatible: > + const: rockchip,rk3399-cif-isp > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + iommus: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 > + > + phys: > + maxItems: 1 > + description: phandle for the PHY port According to http://opensource.rock-chips.com/wiki_Camera_driver, RK3388 can route either of DPHY RX0 or DPHY RX1 to the single ISP instance, while RK3399 has one PHY per ISP instance, with DPHY RX1 being shared with the display. Have you given any thought on how we will support this in a backward-compatible way in the DT bindings ? > + > + phy-names: > + const: dphy > + > + clocks: > + items: > + - description: ISP clock > + - description: ISP aclk clock > + - description: ISP aclk wrapper clock > + - description: ISP hclk clock > + - description: ISP hclk wrapper clock I wonder what aclk and hclk stand far. In any case those names match the CRU documentation, so that seems fine. > + > + clock-names: > + items: > + - const: clk_isp > + - const: aclk_isp > + - const: aclk_isp_wrap > + - const: hclk_isp > + - const: hclk_isp_wrap > + > + # See ./video-interfaces.txt for details > + ports: > + type: object > + additionalProperties: false > + > + properties: > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + port@0: > + type: object > + additionalProperties: false I think this should have a description to tell what this port corresponds to. > + > + properties: > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + reg: > + const: 0 > + description: port identifier. Here and for the endpoint below the description is probably not needed. > + > + patternProperties: > + endpoint: > + type: object > + additionalProperties: false > + > + properties: > + reg: > + maxItems: 1 > + description: endpoint identifier. > + > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + remote-endpoint: true > + > + required: > + - port@0 > + > +required: > + - compatible > + - interrupts > + - clocks > + - clock-names > + - power-domains > + - iommus > + - phys > + - phy-names > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + > + #include <dt-bindings/clock/rk3399-cru.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/power/rk3399-power.h> > + > + parent0: parent@0 { > + #address-cells = <2>; > + #size-cells = <2>; > + > + isp0: isp0@ff910000 { > + compatible = "rockchip,rk3399-cif-isp"; > + reg = <0x0 0xff910000 0x0 0x4000>; > + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; > + clocks = <&cru SCLK_ISP0>, > + <&cru ACLK_ISP0>, <&cru ACLK_ISP0_WRAPPER>, > + <&cru HCLK_ISP0>, <&cru HCLK_ISP0_WRAPPER>; > + clock-names = "clk_isp", > + "aclk_isp", "aclk_isp_wrap", > + "hclk_isp", "hclk_isp_wrap"; > + power-domains = <&power RK3399_PD_ISP0>; > + iommus = <&isp0_mmu>; > + phys = <&dphy>; > + phy-names = "dphy"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + mipi_in_wcam: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&wcam_out>; > + data-lanes = <1 2>; > + }; > + > + mipi_in_ucam: endpoint@1 { > + reg = <1>; > + remote-endpoint = <&ucam_out>; > + data-lanes = <1>; > + }; Are those two cameras connected to the same CSI-2 lines with at most one sensor out of reset ? With the above small issues addressed, Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > + }; > + }; > + }; > + > + i2c7: i2c@ff160000 { > + clock-frequency = <400000>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + wcam: camera@36 { > + compatible = "ovti,ov5695"; > + reg = <0x36>; > + > + port { > + wcam_out: endpoint { > + remote-endpoint = <&mipi_in_wcam>; > + data-lanes = <1 2>; > + }; > + }; > + }; > + > + ucam: camera@3c { > + compatible = "ovti,ov2685"; > + reg = <0x3c>; > + > + port { > + ucam_out: endpoint { > + remote-endpoint = <&mipi_in_ucam>; > + data-lanes = <1>; > + }; > + }; > + }; > + }; > + }; -- Regards, Laurent Pinchart
