Re: [PATCH v2 01/14] dt-bindings: phy: Convert Cadence MHDP PHY bindings to YAML.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 23/12/19 8:45 PM, Yuti Amonkar wrote:
> - Convert the MHDP PHY devicetree bindings to yaml schemas.
> - Rename DP PHY to have generic Torrent PHY nomrnclature.
> - Rename compatible string from "cdns,dp-phy" to "cdns,torrent-phy".
>   This will not affect ABI as the driver has never been functional,
>   and therefore do not exist in any active use case

Since the Torrent SERDES is similar in design to Sierra SERDES, can we
make the binding look similar too.

For example, with the current binding here, it might not be possible to
specify multi-link. Sierra has a subnode for every link.

Thanks
Kishon

> 
> Signed-off-by: Yuti Amonkar <yamonkar@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/phy/phy-cadence-dp.txt     | 30 ----------
>  .../bindings/phy/phy-cadence-torrent.yaml          | 64 ++++++++++++++++++++++
>  2 files changed, 64 insertions(+), 30 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt b/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
> deleted file mode 100644
> index 7f49fd54e..0000000
> --- a/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
> +++ /dev/null
> @@ -1,30 +0,0 @@
> -Cadence MHDP DisplayPort SD0801 PHY binding
> -===========================================
> -
> -This binding describes the Cadence SD0801 PHY hardware included with
> -the Cadence MHDP DisplayPort controller.
> -
> --------------------------------------------------------------------------------
> -Required properties (controller (parent) node):
> -- compatible	: Should be "cdns,dp-phy"
> -- reg		: Defines the following sets of registers in the parent
> -		  mhdp device:
> -			- Offset of the DPTX PHY configuration registers
> -			- Offset of the SD0801 PHY configuration registers
> -- #phy-cells	: from the generic PHY bindings, must be 0.
> -
> -Optional properties:
> -- num_lanes	: Number of DisplayPort lanes to use (1, 2 or 4)
> -- max_bit_rate	: Maximum DisplayPort link bit rate to use, in Mbps (2160,
> -		  2430, 2700, 3240, 4320, 5400 or 8100)
> --------------------------------------------------------------------------------
> -
> -Example:
> -	dp_phy: phy@f0fb030a00 {
> -		compatible = "cdns,dp-phy";
> -		reg = <0xf0 0xfb030a00 0x0 0x00000040>,
> -		      <0xf0 0xfb500000 0x0 0x00100000>;
> -		num_lanes = <4>;
> -		max_bit_rate = <8100>;
> -		#phy-cells = <0>;
> -	};
> diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
> new file mode 100644
> index 0000000..3587312
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
> @@ -0,0 +1,64 @@
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Cadence Torrent SD0801 PHY binding for DisplayPort
> +
> +description:
> +  This binding describes the Cadence SD0801 PHY hardware included with
> +  the Cadence MHDP DisplayPort controller.
> +
> +maintainers:
> +  - Swapnil Jakhade <sjakhade@xxxxxxxxxxx>
> +  - Yuti Amonkar <yamonkar@xxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: cdns,torrent-phy
> +
> +  reg:
> +    items:
> +      - description: Offset of the DPTX PHY configuration registers.
> +      - description: Offset of the SD0801 PHY configuration registers.
> +
> +  reg-names:
> +    items:
> +      - const: dptx_phy
> +      - const: sd0801_phy
> +
> +  "#phy-cells":
> +    const: 0
> +
> +  num_lanes:
> +    description:
> +      Number of DisplayPort lanes.
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - enum: [1, 2, 4]
> +
> +  max_bit_rate:
> +    description:
> +      Maximum DisplayPort link bit rate to use, in Mbps
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100]
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    dp_phy: phy@f0fb030a00 {
> +          compatible = "cdns,torrent-phy";
> +          reg = <0xf0 0xfb030a00 0x0 0x00000040>,
> +                <0xf0 0xfb500000 0x0 0x00100000>;
> +          num_lanes = <4>;
> +          max_bit_rate = <8100>;
> +          #phy-cells = <0>;
> +    };
> +...
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux