Re: [PATCH V3, 1/1] arm64: dts: rockchip: add ROCK Pi S DTS support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 30 Dec 2019 20:19:32 +0530, Akash Gajjar wrote:
> ROCK Pi S is RK3308 based SBC from radxa.com. ROCK Pi S has a,
> - 256MB/512MB DDR3 RAM
> - SD, NAND flash (optional on board 1/2/4/8Gb)
> - 100MB ethernet, PoE (optional)
> - Onboard 802.11 b/g/n wifi + Bluetooth 4.0 Module
> - USB2.0 Type-A HOST x1
> - USB3.0 Type-C OTG x1
> - 26-pin expansion header
> - USB Type-C DC 5V Power Supply
> 
> This patch enables
> - Console
> - NAND Flash
> - SD Card
> 
> Signed-off-by: Akash Gajjar <akash@xxxxxxxxxxxx>
> ---
> Changes for v2
> - Use pwm-supply for vdd_core node instead of vi-supply
> - Add USB2.0 node support
>  
> Changes for v3
> - Use small S on dts file name
> - Add missing semicolon
> - Remove USB2.0 node support
> 
>  .../devicetree/bindings/arm/rockchip.yaml     |   5 +
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../boot/dts/rockchip/rk3308-rock-pi-s.dts    | 221 ++++++++++++++++++
>  3 files changed, 227 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
> 

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux