Re: [PATCH v3 1/6] dt-bindings: phy: Add Amlogic A1 USB2 PHY Bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 27, 2019 at 02:36:41PM +0800, Hanjie Lin wrote:
> Add the Amlogic A1 Family USB2 PHY Bindings
> 
> It supports Host mode only.
> 
> Signed-off-by: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
> Signed-off-by: Yue Wang <yue.wang@xxxxxxxxxxx>
> ---
>  .../bindings/phy/amlogic,meson-a1-usb2-phy.yaml    | 55 ++++++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson-a1-usb2-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-a1-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-a1-usb2-phy.yaml
> new file mode 100644
> index 00000000..2b2c526
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-a1-usb2-phy.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2019 Amlogic, Inc
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/amlogic,meson-a1-usb2-phy.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Amlogic A1 USB2 PHY
> +
> +maintainers:
> +  - Yue Wang <yue.wang@xxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - amlogic,meson-a1-usb2-phy

Use 'const' if there's only 1.

> +
> +  reg:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  reset-names:
> +    items:
> +      - const: phy

Don't need *-names when there's a single entry.

> +
> +  "#phy-cells":
> +    const: 0
> +
> +  power-domains:
> +     maxItems: 1
> +     description:
> +       a phandle to respective power domain node as described by generic
> +       PM domain bindings (see power/power_domain.txt for more information).

Drop the generic description. No need to duplicate everywhere.

> +
> +required:
> +  - compatible
> +  - reg
> +  - resets
> +  - reset-names
> +  - "#phy-cells"
> +  - power-domains
> +
> +examples:
> +  - |
> +    usb2_phy1: phy@40000 {
> +      status = "okay";
> +      compatible = "amlogic,a1-usb2-phy";
> +      reg = <0x0 0x40000 0x0 0x2000>;
> +      resets = <&reset RESET_USBPHY>;
> +      reset-names = "phy";
> +      #phy-cells = <0>;
> +      power-domains = <&pwrc PWRC_USB_ID>;
> +    };
> -- 
> 2.7.4
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux