On 1/3/20 10:18 AM, Al Cooper wrote: > Add support for 7211 USB wake. Disable all possible 7211 USB logic > for S2/S5 if USB wake is not enabled. > > On the 7211, the XHCI wake signal was not connected properly and > only goes to the USB1_USB1_CTRL_TP_DIAG1 diagonstic register. > The workaround is to have VPU code running that polls for the > proper bit in the DIAG register and to wake the system when > the bit is asserted. > > Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx> Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx> -- Florian
