On Thu, Jan 02, 2020 at 08:31:40PM +0800, Chen-Yu Tsai wrote: > On Thu, Jan 2, 2020 at 8:02 PM Maxime Ripard <maxime@xxxxxxxxxx> wrote: > > > > Hi, > > > > On Fri, Dec 20, 2019 at 04:10:03PM +0800, Chen-Yu Tsai wrote: > > > On Fri, Dec 20, 2019 at 4:03 PM Maxime Ripard <maxime@xxxxxxxxxx> wrote: > > > > > > > > Hi, > > > > > > > > On Thu, Dec 19, 2019 at 11:24:52PM +0800, Chen-Yu Tsai wrote: > > > > > On Thu, Dec 19, 2019 at 4:43 PM Maxime Ripard <maxime@xxxxxxxxxx> wrote: > > > > > > > > > > > > The Allwinner A80 SoCs have a USB PHY controller that is used by Linux, > > > > > > with a matching Device Tree binding. > > > > > > > > > > > > Now that we have the DT validation in place, let's convert the device tree > > > > > > bindings for that controller over to a YAML schemas. > > > > > > > > > > > > Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> > > > > > > --- > > > > > > .../phy/allwinner,sun9i-a80-usb-phy.yaml | 135 ++++++++++++++++++ > > > > > > .../devicetree/bindings/phy/sun9i-usb-phy.txt | 37 ----- > > > > > > 2 files changed, 135 insertions(+), 37 deletions(-) > > > > > > create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml > > > > > > delete mode 100644 Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt > > > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml > > > > > > new file mode 100644 > > > > > > index 000000000000..ded7d6f0a119 > > > > > > --- /dev/null > > > > > > +++ b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml > > > > > > @@ -0,0 +1,135 @@ > > > > > > +# SPDX-License-Identifier: GPL-2.0 > > > > > > +%YAML 1.2 > > > > > > +--- > > > > > > +$id: http://devicetree.org/schemas/phy/allwinner,sun9i-a80-usb-phy.yaml# > > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > > > + > > > > > > +title: Allwinner A80 USB PHY Device Tree Bindings > > > > > > + > > > > > > +maintainers: > > > > > > + - Chen-Yu Tsai <wens@xxxxxxxx> > > > > > > + - Maxime Ripard <mripard@xxxxxxxxxx> > > > > > > + > > > > > > +properties: > > > > > > + "#phy-cells": > > > > > > + const: 0 > > > > > > + > > > > > > + compatible: > > > > > > + const: allwinner,sun9i-a80-usb-phy > > > > > > + > > > > > > + reg: > > > > > > + maxItems: 1 > > > > > > + > > > > > > + clocks: > > > > > > + anyOf: > > > > > > + - description: Main PHY Clock > > > > > > + > > > > > > + - items: > > > > > > + - description: Main PHY clock > > > > > > + - description: HSIC 12MHz clock > > > > > > + - description: HSIC 480MHz clock > > > > > > + > > > > > > + clock-names: > > > > > > + oneOf: > > > > > > + - const: phy > > > > > > + > > > > > > + - items: > > > > > > + - const: phy > > > > > > + - const: hsic_12M > > > > > > + - const: hsic_480M > > > > > > + > > > > > > + resets: > > > > > > + anyOf: > > > > > > + - description: Normal USB PHY reset > > > > > > + > > > > > > + - items: > > > > > > + - description: Normal USB PHY reset > > > > > > + - description: HSIC Reset > > > > > > + > > > > > > + reset-names: > > > > > > + oneOf: > > > > > > + - const: phy > > > > > > + > > > > > > + - items: > > > > > > + - const: phy > > > > > > + - const: hsic > > > > > > + > > > > > > + phy_type: > > > > > > + const: hsic > > > > > > + description: > > > > > > + When absent, the PHY type will be assumed to be normal USB. > > > > > > + > > > > > > + phy-supply: > > > > > > + description: > > > > > > + Regulator that powers VBUS > > > > > > + > > > > > > +required: > > > > > > + - "#phy-cells" > > > > > > + - compatible > > > > > > + - reg > > > > > > + - clocks > > > > > > + - clock-names > > > > > > + - resets > > > > > > + - reset-names > > > > > > + > > > > > > +additionalProperties: false > > > > > > + > > > > > > +if: > > > > > > + properties: > > > > > > + phy_type: > > > > > > + const: hsic > > > > > > + > > > > > > + required: > > > > > > + - phy_type > > > > > > + > > > > > > +then: > > > > > > + properties: > > > > > > + clocks: > > > > > > + maxItems: 3 > > > > > > + > > > > > > + clock-names: > > > > > > + maxItems: 3 > > > > > > + > > > > > > + resets: > > > > > > + maxItems: 2 > > > > > > + > > > > > > + reset-names: > > > > > > + maxItems: 2 > > > > > > > > > > So this is slightly incorrect. If phy_type == "hsic", then the > > > > > "phy" clock and reset should not be needed. I say should because > > > > > no boards actually came with HSIC implemented. The A80 Optimus > > > > > board had the HSIC lines on one of the GPIO headers, but I never > > > > > had any HSIC chips lol. > > > > > > > > This isn't what the previous binding was saying though :/ > > > > > > From the original binding: > > > > > > - clock-names : depending on the "phy_type" property, > > > * "phy" for normal USB > > > * "hsic_480M", "hsic_12M" for HSIC > > > - resets : a list of phandle + reset specifier pairs > > > - reset-names : depending on the "phy_type" property, > > > * "phy" for normal USB > > > * "hsic" for HSIC > > > > > > It is recommended to list all clocks and resets available. > > > The driver will only use those matching the phy_type. > > > > I'm not quite sure how we want to fix this then, or even what there's > > to fix. > > > > The previous binding is saying that we need either phy or hsic, and > > that we should ideally set both. The DT are following that > > recommendation, and we have either one item for the clocks (phy), or > > three (phy + 2 HSIC clocks). resets is in a similar situation. > > > > The binding allows to have either one or three, and enforce that in > > HSIC we have three (but leaves the option open to have either 1 or 3 > > in the normal phy type). > > > > As far as I can see, we cover what the binding was saying. Am I > > missing something? > > I guess you're right. Lets just keep why you've done already. > Sorry for the noise. Is that a Reviewed-by ? :) Maxime
Attachment:
signature.asc
Description: PGP signature
