Add support for the Okaya RH128128T display to the st7735r driver.
The RH128128T is a 128x128 1.44" TFT display driven by a Sitronix
ST7715R TFT Controller/Driver. The latter is very similar to the
ST7735R, and can be handled by the existing st7735r driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
drivers/gpu/drm/tiny/st7735r.c | 65 ++++++++++++++++++++++++++++------
1 file changed, 55 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/tiny/st7735r.c b/drivers/gpu/drm/tiny/st7735r.c
index 3f4487c716848cf8..05d162e76d8481e5 100644
--- a/drivers/gpu/drm/tiny/st7735r.c
+++ b/drivers/gpu/drm/tiny/st7735r.c
@@ -1,8 +1,9 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * DRM driver for Sitronix ST7735R panels
+ * DRM driver for Sitronix ST7715R/ST7735R panels
*
* Copyright 2017 David Lechner <david@xxxxxxxxxxxxxx>
+ * Copyright (C) 2019 Glider bvba
*/
#include <linux/backlight.h>
@@ -10,6 +11,7 @@
#include <linux/dma-buf.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/property.h>
#include <linux/spi/spi.h>
#include <video/mipi_display.h>
@@ -37,12 +39,28 @@
#define ST7735R_MY BIT(7)
#define ST7735R_MX BIT(6)
#define ST7735R_MV BIT(5)
+#define ST7735R_RGB BIT(3)
+
+struct st7735r_cfg {
+ const struct drm_display_mode mode;
+ unsigned int left_offset;
+ unsigned int top_offset;
+ unsigned int write_only:1;
+ unsigned int rgb:1; /* RGB (vs. BGR) */
+};
+
+struct st7735r_priv {
+ struct mipi_dbi_dev dbidev; /* Must be first for .release() */
+ unsigned int rgb:1;
+};
static void jd_t18003_t01_pipe_enable(struct drm_simple_display_pipe *pipe,
struct drm_crtc_state *crtc_state,
struct drm_plane_state *plane_state)
{
struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
+ struct st7735r_priv *priv = container_of(dbidev, struct st7735r_priv,
+ dbidev);
struct mipi_dbi *dbi = &dbidev->dbi;
int ret, idx;
u8 addr_mode;
@@ -87,6 +105,10 @@ static void jd_t18003_t01_pipe_enable(struct drm_simple_display_pipe *pipe,
addr_mode = ST7735R_MY | ST7735R_MV;
break;
}
+
+ if (priv->rgb)
+ addr_mode |= ST7735R_RGB;
+
mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT,
MIPI_DCS_PIXEL_FMT_16BIT);
@@ -116,8 +138,17 @@ static const struct drm_simple_display_pipe_funcs jd_t18003_t01_pipe_funcs = {
.prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb,
};
-static const struct drm_display_mode jd_t18003_t01_mode = {
- DRM_SIMPLE_MODE(128, 160, 28, 35),
+static const struct st7735r_cfg jd_t18003_t01_cfg = {
+ .mode = { DRM_SIMPLE_MODE(128, 160, 28, 35) },
+ /* Cannot read from Adafruit 1.8" display via SPI */
+ .write_only = true,
+};
+
+static const struct st7735r_cfg rh128128t_cfg = {
+ .mode = { DRM_SIMPLE_MODE(128, 128, 25, 26) },
+ .left_offset = 2,
+ .top_offset = 3,
+ .rgb = true,
};
DEFINE_DRM_GEM_CMA_FOPS(st7735r_fops);
@@ -136,13 +167,14 @@ static struct drm_driver st7735r_driver = {
};
static const struct of_device_id st7735r_of_match[] = {
- { .compatible = "jianda,jd-t18003-t01" },
+ { .compatible = "jianda,jd-t18003-t01", .data = &jd_t18003_t01_cfg },
+ { .compatible = "okaya,rh128128t", .data = &rh128128t_cfg },
{ },
};
MODULE_DEVICE_TABLE(of, st7735r_of_match);
static const struct spi_device_id st7735r_id[] = {
- { "jd-t18003-t01", 0 },
+ { "jd-t18003-t01", (uintptr_t)&jd_t18003_t01_cfg },
{ },
};
MODULE_DEVICE_TABLE(spi, st7735r_id);
@@ -150,17 +182,26 @@ MODULE_DEVICE_TABLE(spi, st7735r_id);
static int st7735r_probe(struct spi_device *spi)
{
struct device *dev = &spi->dev;
+ const struct st7735r_cfg *cfg;
struct mipi_dbi_dev *dbidev;
+ struct st7735r_priv *priv;
struct drm_device *drm;
struct mipi_dbi *dbi;
struct gpio_desc *dc;
u32 rotation = 0;
int ret;
- dbidev = kzalloc(sizeof(*dbidev), GFP_KERNEL);
- if (!dbidev)
+ cfg = of_device_get_match_data(&spi->dev);
+ if (!cfg)
+ cfg = (void *)spi_get_device_id(spi)->driver_data;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
return -ENOMEM;
+ dbidev = &priv->dbidev;
+ priv->rgb = cfg->rgb;
+
dbi = &dbidev->dbi;
drm = &dbidev->drm;
ret = devm_drm_dev_init(dev, drm, &st7735r_driver);
@@ -193,10 +234,14 @@ static int st7735r_probe(struct spi_device *spi)
if (ret)
return ret;
- /* Cannot read from Adafruit 1.8" display via SPI */
- dbi->read_commands = NULL;
+ if (cfg->write_only)
+ dbi->read_commands = NULL;
+
+ dbidev->left_offset = cfg->left_offset;
+ dbidev->top_offset = cfg->top_offset;
- ret = mipi_dbi_dev_init(dbidev, &jd_t18003_t01_pipe_funcs, &jd_t18003_t01_mode, rotation);
+ ret = mipi_dbi_dev_init(dbidev, &jd_t18003_t01_pipe_funcs, &cfg->mode,
+ rotation);
if (ret)
return ret;
--
2.17.1
