Hi, some changes I made to the R40 .dtsi when playing around with a Bananapi M2 Berry board: - The GICC region is wrongly reported as 4K only, preventing KVM from using its VGIC emulation. - The PMU node is missing, similar story as with the other SoCs: this time the SPI numbers are not even mentioned in the manual. - I hooked up a SPI flash to the PortC SPI0 header pins (from which the board can even boot from). So patch 3 adds the SPI nodes and its pinmux setup, in case people need this for their peripherals. Please have a look and apply! Cheers, Andre. Andre Przywara (3): ARM: dts: sun8i: R40: Upgrade GICC reg size to 8K ARM: dts: sun8i: R40: Add PMU node ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes arch/arm/boot/dts/sun8i-r40.dtsi | 108 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 103 insertions(+), 5 deletions(-) -- 2.14.5
