Re: [PATCH v3 6/6] clk: qcom: Add video clock controller driver for SC7180

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Taniya,

On 12/27/19 8:38 AM, Taniya Das wrote:
> Add support for the video clock controller found on SC7180
> based devices. This would allow video drivers to probe
> and control their clocks.
> 
> Signed-off-by: Taniya Das <tdas@xxxxxxxxxxxxxx>
> ---
>  drivers/clk/qcom/Kconfig          |   8 ++
>  drivers/clk/qcom/Makefile         |   1 +
>  drivers/clk/qcom/videocc-sc7180.c | 259 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 268 insertions(+)
>  create mode 100644 drivers/clk/qcom/videocc-sc7180.c
> 

<cut>

> +static const struct freq_tbl ftbl_video_cc_venus_clk_src[] = {
> +	F(19200000, P_BI_TCXO, 1, 0, 0),

Do you know is this frequency (19.2MHz) has real usage? The lower freq
I've seen for Venus was 75MHz.

> +	F(150000000, P_VIDEO_PLL0_OUT_MAIN, 4, 0, 0),
> +	F(270000000, P_VIDEO_PLL0_OUT_MAIN, 2.5, 0, 0),
> +	F(340000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
> +	F(434000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
> +	F(500000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
> +	{ }
> +};
> +
-- 
regards,
Stan



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux