Re: [PATCH v2 3/3] clk: qcom: Add modem clock controller driver for SC7180

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey Taniya,

On 2019-12-27 10:12, Taniya Das wrote:
Add support for the modem clock controller found on SC7180
based devices. This would allow modem drivers to probe and
control their clocks.

Signed-off-by: Taniya Das <tdas@xxxxxxxxxxxxxx>
---
 drivers/clk/qcom/Kconfig      |  9 +++++
 drivers/clk/qcom/Makefile     |  1 +
 drivers/clk/qcom/gcc-sc7180.c | 70 ++++++++++++++++++++++++++++++++
drivers/clk/qcom/mss-sc7180.c | 94 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 174 insertions(+)
 create mode 100644 drivers/clk/qcom/mss-sc7180.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 3b33ef1..5d4b6e5 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -245,6 +245,15 @@ config SC_GCC_7180
 	  Say Y if you want to use peripheral devices such as UART, SPI,
 	  I2C, USB, UFS, SDCC, etc.

+config SC_MSS_7180
+	tristate "SC7180 MSS Clock Controller"
+	select SC_GCC_7180
+	help
+	  Support for the MSS clock controller on Qualcomm Technologies, Inc
+	  SC7180 devices.
+	  Say Y if you want to use the MSS branch clocks of the MSS clock
+	  controller to reset the MSS subsystem.
+
 config SDM_CAMCC_845
 	tristate "SDM845 Camera Clock Controller"
 	select SDM_GCC_845
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index d899661..0e66bc6 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_QCS_GCC_404) += gcc-qcs404.o
 obj-$(CONFIG_QCS_Q6SSTOP_404) += q6sstop-qcs404.o
 obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o
 obj-$(CONFIG_SC_GCC_7180) += gcc-sc7180.o
+obj-$(CONFIG_SC_MSS_7180) += mss-sc7180.o
 obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o
 obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
 obj-$(CONFIG_SDM_GCC_660) += gcc-sdm660.o
diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
index 38424e6..7b3a705 100644
--- a/drivers/clk/qcom/gcc-sc7180.c
+++ b/drivers/clk/qcom/gcc-sc7180.c
@@ -2165,6 +2165,71 @@ static struct clk_branch gcc_video_xo_clk = {
 	},
 };

+static struct clk_branch gcc_mss_cfg_ahb_clk = {
+	.halt_reg = 0x8a000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_mfab_axis_clk = {
+	.halt_reg = 0x8a004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x8a004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_mfab_axis_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_nav_axi_clk = {
+	.halt_reg = 0x8a00c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x8a00c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_nav_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_snoc_axi_clk = {
+	.halt_reg = 0x8a150,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a150,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_snoc_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_q6_memnoc_axi_clk = {
+	.halt_reg = 0x8a154,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a154,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_q6_memnoc_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct gdsc ufs_phy_gdsc = {
 	.gdscr = 0x77004,
 	.pd = {
@@ -2334,6 +2399,11 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
 	[GPLL7] = &gpll7.clkr,
 	[GPLL4] = &gpll4.clkr,
 	[GPLL1] = &gpll1.clkr,
+	[GCC_MSS_CFG_AHB_CBCR] = &gcc_mss_cfg_ahb_clk.clkr,
+	[GCC_MSS_MFAB_AXIS_CBCR] = &gcc_mss_mfab_axis_clk.clkr,
+	[GCC_MSS_NAV_AXI_CBCR] = &gcc_mss_nav_axi_clk.clkr,
+	[GCC_MSS_Q6_MEMNOC_AXI_CBCR] = &gcc_mss_q6_memnoc_axi_clk.clkr,
+	[GCC_MSS_SNOC_AXI_CBCR] = &gcc_mss_snoc_axi_clk.clkr,
 };

 static const struct qcom_reset_map gcc_sc7180_resets[] = {
diff --git a/drivers/clk/qcom/mss-sc7180.c b/drivers/clk/qcom/mss-sc7180.c
new file mode 100644
index 0000000..24c38dc
--- /dev/null
+++ b/drivers/clk/qcom/mss-sc7180.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,mss-sc7180.h>
+
+#include "clk-regmap.h"
+#include "clk-branch.h"
+#include "common.h"
+
+static struct clk_branch mss_axi_nav_clk = {
+	.halt_reg = 0xbc,

if we use the entire mpss_perph
reg space it should be 0x20bc
instead.

+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xbc,

0x20bc

+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "mss_axi_nav_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch mss_axi_crypto_clk = {
+	.halt_reg = 0xcc,

if we use the entire mpss_perph
reg space it should be 0x20cc
instead.

+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xcc,

0x20cc

+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "mss_axi_crypto_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct regmap_config mss_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.fast_io	= true,
+};
+
+static struct clk_regmap *mss_sc7180_clocks[] = {
+	[MSS_AXI_CRYPTO_CLK] = &mss_axi_crypto_clk.clkr,
+	[MSS_AXI_NAV_CLK] = &mss_axi_nav_clk.clkr,
+};
+
+static const struct qcom_cc_desc mss_sc7180_desc = {
+	.config = &mss_regmap_config,
+	.clks = mss_sc7180_clocks,
+	.num_clks = ARRAY_SIZE(mss_sc7180_clocks),
+};
+
+static int mss_sc7180_probe(struct platform_device *pdev)
+{
+	return qcom_cc_probe(pdev, &mss_sc7180_desc);

Similar to turingcc-qcs404 and q6sstop-qcs404
shouldn't we model the iface clk dependency
here since  both the above clocks cant be turned
on/off without it.

+}
+
+static const struct of_device_id mss_sc7180_match_table[] = {
+	{ .compatible = "qcom,sc7180-mss" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mss_sc7180_match_table);
+
+static struct platform_driver mss_sc7180_driver = {
+	.probe		= mss_sc7180_probe,
+	.driver		= {
+		.name		= "sc7180-mss",
+		.of_match_table = mss_sc7180_match_table,
+	},
+};
+
+static int __init mss_sc7180_init(void)
+{
+	return platform_driver_register(&mss_sc7180_driver);
+}
+subsys_initcall(mss_sc7180_init);
+
+static void __exit mss_sc7180_exit(void)
+{
+	platform_driver_unregister(&mss_sc7180_driver);
+}
+module_exit(mss_sc7180_exit);
+
+MODULE_DESCRIPTION("QTI MSS SC7180 Driver");
+MODULE_LICENSE("GPL v2");
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux