On Mon 23 Dec 05:14 PST 2019, Rajeshwari wrote:
This patch adds critical interrupt to tsens nodes, add cooling maps,
renames nodes and renames labels.
While the end result looks reasonable I would like to see this split in
a few different patches - and perhaps a line or two in the commit
message describing the new naming scheme for the renames.
Thanks,
Bjorn
> Signed-off-by: Rajeshwari <rkambl@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 289 +++++++++++++++++++++++++++++------
> 1 file changed, 239 insertions(+), 50 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 3676bfd..e419ca0 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -10,6 +10,7 @@
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/phy/phy-qcom-qusb2.h>
> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +#include <dt-bindings/thermal/thermal.h>
>
> / {
> interrupt-parent = <&intc>;
> @@ -78,6 +79,7 @@
> reg = <0x0 0x0>;
> enable-method = "psci";
> next-level-cache = <&L2_0>;
> + #cooling-cells = <2>;
> qcom,freq-domain = <&cpufreq_hw 0>;
> L2_0: l2-cache {
> compatible = "cache";
> @@ -94,6 +96,7 @@
> reg = <0x0 0x100>;
> enable-method = "psci";
> next-level-cache = <&L2_100>;
> + #cooling-cells = <2>;
> qcom,freq-domain = <&cpufreq_hw 0>;
> L2_100: l2-cache {
> compatible = "cache";
> @@ -107,6 +110,7 @@
> reg = <0x0 0x200>;
> enable-method = "psci";
> next-level-cache = <&L2_200>;
> + #cooling-cells = <2>;
> qcom,freq-domain = <&cpufreq_hw 0>;
> L2_200: l2-cache {
> compatible = "cache";
> @@ -120,6 +124,7 @@
> reg = <0x0 0x300>;
> enable-method = "psci";
> next-level-cache = <&L2_300>;
> + #cooling-cells = <2>;
> qcom,freq-domain = <&cpufreq_hw 0>;
> L2_300: l2-cache {
> compatible = "cache";
> @@ -133,6 +138,7 @@
> reg = <0x0 0x400>;
> enable-method = "psci";
> next-level-cache = <&L2_400>;
> + #cooling-cells = <2>;
> qcom,freq-domain = <&cpufreq_hw 0>;
> L2_400: l2-cache {
> compatible = "cache";
> @@ -146,6 +152,7 @@
> reg = <0x0 0x500>;
> enable-method = "psci";
> next-level-cache = <&L2_500>;
> + #cooling-cells = <2>;
> qcom,freq-domain = <&cpufreq_hw 0>;
> L2_500: l2-cache {
> compatible = "cache";
> @@ -159,6 +166,7 @@
> reg = <0x0 0x600>;
> enable-method = "psci";
> next-level-cache = <&L2_600>;
> + #cooling-cells = <2>;
> qcom,freq-domain = <&cpufreq_hw 1>;
> L2_600: l2-cache {
> compatible = "cache";
> @@ -172,6 +180,7 @@
> reg = <0x0 0x700>;
> enable-method = "psci";
> next-level-cache = <&L2_700>;
> + #cooling-cells = <2>;
> qcom,freq-domain = <&cpufreq_hw 1>;
> L2_700: l2-cache {
> compatible = "cache";
> @@ -1058,8 +1067,9 @@
> reg = <0 0x0c263000 0 0x1ff>, /* TM */
> <0 0x0c222000 0 0x1ff>; /* SROT */
> #qcom,sensors = <15>;
> - interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "uplow";
> + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uplow","critical";
> #thermal-sensor-cells = <1>;
> };
>
> @@ -1068,8 +1078,9 @@
> reg = <0 0x0c265000 0 0x1ff>, /* TM */
> <0 0x0c223000 0 0x1ff>; /* SROT */
> #qcom,sensors = <10>;
> - interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "uplow";
> + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uplow","critical";
> #thermal-sensor-cells = <1>;
> };
>
> @@ -1301,277 +1312,455 @@
> };
>
> thermal-zones {
> - cpu0-thermal {
> + cpu_0_0-thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> thermal-sensors = <&tsens0 1>;
>
> trips {
> - cpu0_alert0: trip-point0 {
> + cpu_0_0_alert0: trip-point0 {
> temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu0_alert1: trip-point1 {
> + cpu_0_0_alert1: trip-point1 {
> temperature = <95000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu0_crit: cpu_crit {
> + cpu_0_0_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_0_0_alert0>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu_0_0_alert1>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> - cpu1-thermal {
> + cpu_0_1-thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> thermal-sensors = <&tsens0 2>;
>
> trips {
> - cpu1_alert0: trip-point0 {
> + cpu_0_1_alert0: trip-point0 {
> temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu1_alert1: trip-point1 {
> + cpu_0_1_alert1: trip-point1 {
> temperature = <95000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu1_crit: cpu_crit {
> + cpu_0_1_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_0_1_alert0>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu_0_1_alert1>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> - cpu2-thermal {
> + cpu_0_2-thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> thermal-sensors = <&tsens0 3>;
>
> trips {
> - cpu2_alert0: trip-point0 {
> + cpu_0_2_alert0: trip-point0 {
> temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu2_alert1: trip-point1 {
> + cpu_0_2_alert1: trip-point1 {
> temperature = <95000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu2_crit: cpu_crit {
> + cpu_0_2_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_0_2_alert0>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu_0_2_alert1>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> - cpu3-thermal {
> + cpu_0_3-thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> thermal-sensors = <&tsens0 4>;
>
> trips {
> - cpu3_alert0: trip-point0 {
> + cpu_0_3_alert0: trip-point0 {
> temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu3_alert1: trip-point1 {
> + cpu_0_3_alert1: trip-point1 {
> temperature = <95000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu3_crit: cpu_crit {
> + cpu_0_3_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_0_3_alert0>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu_0_3_alert1>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> - cpu4-thermal {
> + cpu_0_4-thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> thermal-sensors = <&tsens0 5>;
>
> trips {
> - cpu4_alert0: trip-point0 {
> + cpu_0_4_alert0: trip-point0 {
> temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu4_alert1: trip-point1 {
> + cpu_0_4_alert1: trip-point1 {
> temperature = <95000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu4_crit: cpu_crit {
> + cpu_0_4_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_0_4_alert0>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu_0_4_alert1>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> - cpu5-thermal {
> + cpu_0_5-thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> thermal-sensors = <&tsens0 6>;
>
> trips {
> - cpu5_alert0: trip-point0 {
> + cpu_0_5_alert0: trip-point0 {
> temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu5_alert1: trip-point1 {
> + cpu_0_5_alert1: trip-point1 {
> temperature = <95000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu5_crit: cpu_crit {
> + cpu_0_5_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_0_5_alert0>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu_0_5_alert1>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> - cpu6-thermal {
> + cpu_1_0-thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> thermal-sensors = <&tsens0 9>;
>
> trips {
> - cpu6_alert0: trip-point0 {
> + cpu_1_0_alert0: trip-point0 {
> temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu6_alert1: trip-point1 {
> + cpu_1_0_alert1: trip-point1 {
> temperature = <95000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu6_crit: cpu_crit {
> + cpu_1_0_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_1_0_alert0>;
> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu_1_0_alert1>;
> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> - cpu7-thermal {
> + cpu_1_1-thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> thermal-sensors = <&tsens0 10>;
>
> trips {
> - cpu7_alert0: trip-point0 {
> + cpu_1_1_alert0: trip-point0 {
> temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu7_alert1: trip-point1 {
> + cpu_1_1_alert1: trip-point1 {
> temperature = <95000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu7_crit: cpu_crit {
> + cpu_1_1_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_1_1_alert0>;
> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu_1_1_alert1>;
> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> - cpu8-thermal {
> + cpu_1_2-thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> thermal-sensors = <&tsens0 11>;
>
> trips {
> - cpu8_alert0: trip-point0 {
> + cpu_1_2_alert0: trip-point0 {
> temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu8_alert1: trip-point1 {
> + cpu_1_2_alert1: trip-point1 {
> temperature = <95000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu8_crit: cpu_crit {
> + cpu_1_2_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_1_2_alert0>;
> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu_1_2_alert1>;
> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> - cpu9-thermal {
> + cpu_1_3-thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> thermal-sensors = <&tsens0 12>;
>
> trips {
> - cpu9_alert0: trip-point0 {
> + cpu_1_3_alert0: trip-point0 {
> temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu9_alert1: trip-point1 {
> + cpu_1_3_alert1: trip-point1 {
> temperature = <95000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu9_crit: cpu_crit {
> + cpu_1_3_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_1_3_alert0>;
> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu_1_3_alert1>;
> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> - aoss0-thermal {
> + aoss_0-thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> @@ -1586,7 +1775,7 @@
> };
> };
>
> - cpuss0-thermal {
> + cpuss_0-thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> @@ -1606,7 +1795,7 @@
> };
> };
>
> - cpuss1-thermal {
> + cpuss_1-thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> @@ -1626,7 +1815,7 @@
> };
> };
>
> - gpuss0-thermal {
> + gpuss_0-thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> @@ -1641,7 +1830,7 @@
> };
> };
>
> - gpuss1-thermal {
> + gpuss_1-thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> @@ -1656,7 +1845,7 @@
> };
> };
>
> - aoss1-thermal {
> + aoss_1-thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
