Add a simple-mfd representing IMEM on SDM845 and define the PIL
relocation info region, so that post mortem tools will be able to locate
the loaded remoteprocs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
Changes since v1:
- None
arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 407d26e92fcc..e1e13d5bfeb3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3020,6 +3020,16 @@ spmi_bus: spmi@c440000 {
cell-index = <0>;
};
+ imem@146bf000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0 0x146bf000 0 0x1000>;
+
+ pil-reloc {
+ compatible ="qcom,pil-reloc-info";
+ offset = <0x94c>;
+ };
+ };
+
apps_smmu: iommu@15000000 {
compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
reg = <0 0x15000000 0 0x80000>;
--
2.24.0
