On Mon, Dec 16, 2019 at 01:28:05PM +0100, Guido Günther wrote: > We allow configuration of brightness mode and over voltage > protection. > > Signed-off-by: Guido Günther <agx@xxxxxxxxxxx> > --- > Documentation/devicetree/bindings/leds/leds-lm3692x.txt | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt > index 4c2d923f8758..f195e8b45d85 100644 > --- a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt > +++ b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt > @@ -18,6 +18,10 @@ Required properties: > Optional properties: > - enable-gpios : gpio pin to enable/disable the device. > - vled-supply : LED supply > + - ti,brightness-mapping-exponential: Whether to use exponential > + brightness mapping > + - ti,overvoltage-volts: Overvoltage protection in Volts, can > + be 0 (unprotected), 21, 25 or 29V '-microvolt' is the standard unit suffix. > > Required child properties: > - reg : 0 - Will enable all LED sync paths > -- > 2.23.0 >
