[PATCH v2 1/6] dt: bindings: lm3692x: Add ti,ovp-microvolt property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This allows to set the overvoltage protection to 17V, 21V, 25V or 29V.

Signed-off-by: Guido Günther <agx@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/leds/leds-lm3692x.txt | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
index 4c2d923f8758..95f6d8c19f20 100644
--- a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
@@ -18,6 +18,10 @@ Required properties:
 Optional properties:
 	- enable-gpios : gpio pin to enable/disable the device.
 	- vled-supply : LED supply
+	- ti,ovp-microvolt: Overvoltage protection in
+	    micro-volt, can be 17000000, 21000000, 25000000 or
+	    29000000. If ti,ovp-microvolt is not specified it
+	    defaults to 29000000.
 
 Required child properties:
 	- reg : 0 - Will enable all LED sync paths
@@ -44,6 +48,7 @@ led-controller@36 {
 
 	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 	vled-supply = <&vbatt>;
+	ti,ovp-microvolt = <25000000>;
 
 	led@0 {
 		reg = <0>;
-- 
2.23.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux