[PATCH 0/2] ath10k: Enable QDSS clock on sm8150

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On SM8150 the WiFi firmware depends on the QDSS clock ticking, or the system
will reset due to an NoC error. So this adds an optional clock to the ath10k
binding and makes sure it's enabled while the WiFi firmware needs it.

Bjorn Andersson (2):
  ath10k: Add optional qdss clk
  arm64: dts: qcom: sm8150: Specify qdss clock for wifi

 .../devicetree/bindings/net/wireless/qcom,ath10k.txt          | 2 +-
 arch/arm64/boot/dts/qcom/sm8150.dtsi                          | 4 ++--
 drivers/net/wireless/ath/ath10k/snoc.c                        | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

-- 
2.24.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux