Re: [PATCH v5 12/19] ASoC: tegra: Add initial parent configuration for audio mclk

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



21.12.2019 01:26, Sowjanya Komatineni пишет:
> Tegra PMC clock clk_out_1 is dedicated for audio mclk from Tegra30
> through Tegra210 and currently Tegra clock driver does initial parent
> configuration for audio mclk "clk_out_1" and enables them by default.
> 
> With the move of Tera PMC clocks from clock driver to Tegra PMC
> driver, initial parent configuration for audio clocks are through
> the device tree using assigned-clock-parents property.
> 
> Default clock parents can be specified in device tree using
> assigned-clocks and assigned-clock-parents and there is no need
> to have clock driver do parent configuration and enable audio related
> clocks.
> 
> This patch has implementation for initial parent configuration in
> audio driver when default parent configuration is not specified in the
> device tree using assigned-clock properties and enables audio clocks
> during the clock rate change.
> 
> This patch configures PLLA_OUT0 as parent to extern1 and extern1
> as parent to clk_out_1 and uses clk_out_1 as cdev1 clock to allow
> mclk control from this driver.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
> ---
>  sound/soc/tegra/tegra_asoc_utils.c | 71 ++++++++++++++++++++++----------------
>  1 file changed, 41 insertions(+), 30 deletions(-)
> 
> diff --git a/sound/soc/tegra/tegra_asoc_utils.c b/sound/soc/tegra/tegra_asoc_utils.c
> index 38535962029c..fc3135c08f43 100644
> --- a/sound/soc/tegra/tegra_asoc_utils.c
> +++ b/sound/soc/tegra/tegra_asoc_utils.c
> @@ -7,6 +7,7 @@
>   */
>  
>  #include <linux/clk.h>
> +#include <linux/clk-provider.h>

This is illegal, it is not a clock provider.

>  #include <linux/device.h>
>  #include <linux/err.h>
>  #include <linux/kernel.h>
> @@ -59,9 +60,8 @@ int tegra_asoc_utils_set_rate(struct tegra_asoc_utils_data *data, int srate,
>  	data->set_baseclock = 0;
>  	data->set_mclk = 0;
>  
> -	clk_disable_unprepare(data->clk_cdev1);
> -	clk_disable_unprepare(data->clk_pll_a_out0);
> -	clk_disable_unprepare(data->clk_pll_a);
> +	if (__clk_is_enabled(data->clk_cdev1))
> +		clk_disable_unprepare(data->clk_cdev1);

The root of the problem is that you removed clocks enabling from
tegra_asoc_utils_init().

I'm not sure why clocks should be disabled during the rate-changing,
probably this action is not really needed.

diff --git a/sound/soc/tegra/tegra_asoc_utils.c
b/sound/soc/tegra/tegra_asoc_utils.c
index 46ff70c16b74..789fd03e51a7 100644
--- a/sound/soc/tegra/tegra_asoc_utils.c
+++ b/sound/soc/tegra/tegra_asoc_utils.c
@@ -7,7 +7,6 @@
  */

 #include <linux/clk.h>
-#include <linux/clk-provider.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/kernel.h>
@@ -60,9 +59,6 @@ int tegra_asoc_utils_set_rate(struct
tegra_asoc_utils_data *data, int srate,
 	data->set_baseclock = 0;
 	data->set_mclk = 0;

-	if (__clk_is_enabled(data->clk_cdev1))
-		clk_disable_unprepare(data->clk_cdev1);
-
 	err = clk_set_rate(data->clk_pll_a, new_baseclock);
 	if (err) {
 		dev_err(data->dev, "Can't set pll_a rate: %d\n", err);
@@ -77,12 +73,6 @@ int tegra_asoc_utils_set_rate(struct
tegra_asoc_utils_data *data, int srate,

 	/* Don't set cdev1/extern1 rate; it's locked to pll_a_out0 */

-	err = clk_prepare_enable(data->clk_cdev1);
-	if (err) {
-		dev_err(data->dev, "Can't enable cdev1: %d\n", err);
-		return err;
-	}
-
 	data->set_baseclock = new_baseclock;
 	data->set_mclk = mclk;

@@ -96,9 +86,6 @@ int tegra_asoc_utils_set_ac97_rate(struct
tegra_asoc_utils_data *data)
 	const int ac97_rate = 24576000;
 	int err;

-	if (__clk_is_enabled(data->clk_cdev1))
-		clk_disable_unprepare(data->clk_cdev1);
-
 	/*
 	 * AC97 rate is fixed at 24.576MHz and is used for both the host
 	 * controller and the external codec
@@ -117,12 +104,6 @@ int tegra_asoc_utils_set_ac97_rate(struct
tegra_asoc_utils_data *data)

 	/* Don't set cdev1/extern1 rate; it's locked to pll_a_out0 */

-	err = clk_prepare_enable(data->clk_cdev1);
-	if (err) {
-		dev_err(data->dev, "Can't enable cdev1: %d\n", err);
-		return err;
-	}
-
 	data->set_baseclock = pll_rate;
 	data->set_mclk = ac97_rate;

@@ -213,6 +194,12 @@ int tegra_asoc_utils_init(struct
tegra_asoc_utils_data *data,
 		data->clk_cdev1 = clk_out_1;
 	}

+	ret = clk_prepare_enable(data->clk_cdev1);
+	if (ret) {
+		dev_err(data->dev, "Can't enable cdev1: %d\n", ret);
+		return ret;
+	}
+
 	ret = tegra_asoc_utils_set_rate(data, 44100, 256 * 44100);

 	return ret;


>  	err = clk_set_rate(data->clk_pll_a, new_baseclock);
>  	if (err) {
> @@ -77,18 +77,6 @@ int tegra_asoc_utils_set_rate(struct tegra_asoc_utils_data *data, int srate,
>  
>  	/* Don't set cdev1/extern1 rate; it's locked to pll_a_out0 */
>  
> -	err = clk_prepare_enable(data->clk_pll_a);
> -	if (err) {
> -		dev_err(data->dev, "Can't enable pll_a: %d\n", err);
> -		return err;
> -	}
> -
> -	err = clk_prepare_enable(data->clk_pll_a_out0);
> -	if (err) {
> -		dev_err(data->dev, "Can't enable pll_a_out0: %d\n", err);
> -		return err;
> -	}
> -
>  	err = clk_prepare_enable(data->clk_cdev1);
>  	if (err) {
>  		dev_err(data->dev, "Can't enable cdev1: %d\n", err);
> @@ -108,9 +96,8 @@ int tegra_asoc_utils_set_ac97_rate(struct tegra_asoc_utils_data *data)
>  	const int ac97_rate = 24576000;
>  	int err;
>  
> -	clk_disable_unprepare(data->clk_cdev1);
> -	clk_disable_unprepare(data->clk_pll_a_out0);
> -	clk_disable_unprepare(data->clk_pll_a);
> +	if (__clk_is_enabled(data->clk_cdev1))
> +		clk_disable_unprepare(data->clk_cdev1);
>  
>  	/*
>  	 * AC97 rate is fixed at 24.576MHz and is used for both the host
> @@ -130,18 +117,6 @@ int tegra_asoc_utils_set_ac97_rate(struct tegra_asoc_utils_data *data)
>  
>  	/* Don't set cdev1/extern1 rate; it's locked to pll_a_out0 */
>  
> -	err = clk_prepare_enable(data->clk_pll_a);
> -	if (err) {
> -		dev_err(data->dev, "Can't enable pll_a: %d\n", err);
> -		return err;
> -	}
> -
> -	err = clk_prepare_enable(data->clk_pll_a_out0);
> -	if (err) {
> -		dev_err(data->dev, "Can't enable pll_a_out0: %d\n", err);
> -		return err;
> -	}
> -
>  	err = clk_prepare_enable(data->clk_cdev1);
>  	if (err) {
>  		dev_err(data->dev, "Can't enable cdev1: %d\n", err);
> @@ -158,6 +133,7 @@ EXPORT_SYMBOL_GPL(tegra_asoc_utils_set_ac97_rate);
>  int tegra_asoc_utils_init(struct tegra_asoc_utils_data *data,
>  			  struct device *dev)
>  {
> +	struct clk *clk_out_1, *clk_extern1;
>  	int ret;
>  
>  	data->dev = dev;
> @@ -193,6 +169,41 @@ int tegra_asoc_utils_init(struct tegra_asoc_utils_data *data,
>  		return PTR_ERR(data->clk_cdev1);
>  	}
>  
> +	/*
> +	 * If clock parents are not set in DT, configure here to use clk_out_1
> +	 * as mclk and extern1 as parent for Tegra30 and higher.
> +	 */
> +	if (!of_find_property(dev->of_node, "assigned-clock-parents", NULL) &&
> +	    data->soc > TEGRA_ASOC_UTILS_SOC_TEGRA20) {

Please add a message here about falling back to configuring clocks for a
legacy device-tree, telling that device-tree needs to be updated.

> +		clk_extern1 = devm_clk_get(dev, "extern1");
> +		if (IS_ERR(clk_extern1)) {
> +			dev_err(data->dev, "Can't retrieve clk extern1\n");
> +			return PTR_ERR(clk_extern1);
> +		}
> +
> +		ret = clk_set_parent(clk_extern1, data->clk_pll_a_out0);
> +		if (ret < 0) {
> +			dev_err(data->dev,
> +				"Set parent failed for clk extern1\n");
> +			return ret;
> +		}
> +
> +		clk_out_1 = devm_clk_get(dev, "clk_out_1");
> +		if (IS_ERR(clk_out_1)) {
> +			dev_err(data->dev, "Can't retrieve clk clk_out_1\n");
> +			return PTR_ERR(clk_out_1);
> +		}
> +
> +		ret = clk_set_parent(clk_out_1, clk_extern1);
> +		if (ret < 0) {
> +			dev_err(data->dev,
> +				"Set parent failed for clk_out_1\n");
> +			return ret;
> +		}
> +
> +		data->clk_cdev1 = clk_out_1;
> +	}
> +
>  	ret = tegra_asoc_utils_set_rate(data, 44100, 256 * 44100);
>  
>  	return ret;
> 

I'd also add tegra_asoc_utils_deinit() to disable clock on drivers removal.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux