This series adds support for PTP (IEEE 1588) P2P one-step time stamping along with a driver for a hardware device that supports this. If the hardware supports p2p one-step, it subtracts the ingress time stamp value from the Pdelay_Request correction field. The user space software stack then simply copies the correction field into the Pdelay_Response, and on transmission the hardware adds the egress time stamp into the correction field. This new functionality extends CONFIG_NETWORK_PHY_TIMESTAMPING to cover MII snooping devices, but it still depends on phylib, just as that option does. Expanding beyond phylib is not within the scope of the this series. User space support is available in the current linuxptp master branch. - Patch 1 adds phy_device methods for existing time stamping fields. - Patches 2-5 convert the stack and drivers to the new methods. - Patch 6 moves code around the dp83640 driver. - Patches 7-10 add support for MII time stamping in non-PHY devices. - Patch 11 adds the new P2P 1-step option. - Patch 12 adds a driver implementing the new option. Thanks, Richard Changed in v8: ~~~~~~~~~~~~~~ - Avoided adding forward functional declarations in the dp83640 driver. - Picked up Florian's new review tags and another one from Andrew. Changed in v7: ~~~~~~~~~~~~~~ - Converted pr_debug|err to dev_ variants in new driver. - Fixed device tree documentation per Rob's v6 review. - Picked up Andrew's and Rob's review tags. - Silenced sparse warnings in new driver. Changed in v6: ~~~~~~~~~~~~~~ - Added methods for accessing the phy_device time stamping fields. - Adjust the device tree documentation per Rob's v5 review. - Fixed the build failures due to missing exports. Changed in v5: ~~~~~~~~~~~~~~ - Fixed build failure in macvlan. - Fixed latent bug with its gcc warning in the driver. Changed in v4: ~~~~~~~~~~~~~~ - Correct error paths and PTR_ERR return values in the framework. - Expanded KernelDoc comments WRT PHY locking. - Pick up Andrew's review tag. Changed in v3: ~~~~~~~~~~~~~~ - Simplify the device tree binding and document the time stamping phandle by itself. Changed in v2: ~~~~~~~~~~~~~~ - Per the v1 review, changed the modeling of MII time stamping devices. They are no longer a kind of mdio device. Richard Cochran (12): net: phy: Introduce helper functions for time stamping support. net: macvlan: Use the PHY time stamping interface. net: vlan: Use the PHY time stamping interface. net: ethtool: Use the PHY time stamping interface. net: netcp_ethss: Use the PHY time stamping interface. net: phy: dp83640: Move the probe and remove methods around. net: Introduce a new MII time stamping interface. net: Add a layer for non-PHY MII time stamping drivers. dt-bindings: ptp: Introduce MII time stamping devices. net: mdio: of: Register discovered MII time stampers. net: Introduce peer to peer one step PTP time stamping. ptp: Add a driver for InES time stamping IP core. .../devicetree/bindings/ptp/ptp-ines.txt | 35 + .../devicetree/bindings/ptp/timestamper.txt | 42 + .../net/ethernet/broadcom/bnx2x/bnx2x_main.c | 1 + drivers/net/ethernet/ti/netcp_ethss.c | 8 +- drivers/net/macvlan.c | 4 +- drivers/net/phy/Makefile | 2 + drivers/net/phy/dp83640.c | 217 ++--- drivers/net/phy/mii_timestamper.c | 125 +++ drivers/net/phy/phy.c | 4 +- drivers/net/phy/phy_device.c | 5 + drivers/of/of_mdio.c | 30 +- drivers/ptp/Kconfig | 10 + drivers/ptp/Makefile | 1 + drivers/ptp/ptp_ines.c | 852 ++++++++++++++++++ include/linux/mii_timestamper.h | 121 +++ include/linux/phy.h | 85 +- include/uapi/linux/net_tstamp.h | 8 + net/8021q/vlan_dev.c | 4 +- net/Kconfig | 7 +- net/core/dev_ioctl.c | 1 + net/core/timestamping.c | 20 +- net/ethtool/ioctl.c | 4 +- 22 files changed, 1432 insertions(+), 154 deletions(-) create mode 100644 Documentation/devicetree/bindings/ptp/ptp-ines.txt create mode 100644 Documentation/devicetree/bindings/ptp/timestamper.txt create mode 100644 drivers/net/phy/mii_timestamper.c create mode 100644 drivers/ptp/ptp_ines.c create mode 100644 include/linux/mii_timestamper.h -- 2.20.1
