Add devicetree binding for the Bosch BMA400 3-axes ultra-low power accelerometer sensor. Signed-off-by: Dan Robertson <dan@xxxxxxxxxxxxxxx> --- .../bindings/iio/accel/bosch,bma400.yaml | 54 +++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml new file mode 100644 index 000000000000..e87cb636b3e2 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/bosch,bma400.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMA400 triaxial acceleration sensor + +maintainers: + - Dan Robertson <dan@xxxxxxxxxxxxxxx> + +description: | + Acceleration and temerature iio sensors with an i2c interface + + Specifications about the sensor can be found at: + https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA400-DS000.pdf + +properties: + compatible: + enum: + - bosch,bma400 + + reg: + maxItems: 1 + + vdd-supply: + description: phandle to the regulator that provides power to the accelerometer + + vddio-supply: + description: phandle to the regulator that provides power to the sensor's IO + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + accelerometer@14 { + compatible = "bosch,bma400"; + reg = <0x14>; + vdd-supply = <&vdd>; + vddio-supply = <&vddio>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + };
