Re: [PATCH v4 13/13] iommu/arm-smmu-v3: Add support for PCI PASID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jean,

On 12/19/19 5:30 PM, Jean-Philippe Brucker wrote:
> Enable PASID for PCI devices that support it. Since the SSID tables are
> allocated by arm_smmu_attach_dev(), PASID has to be enabled early enough.
> arm_smmu_dev_feature_enable() would be too late, since by that time the
> main DMA domain has already been attached. Do it in add_device() instead.
> 
> Tested-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> Signed-off-by: Jean-Philippe Brucker <jean-philippe@xxxxxxxxxx>
Reviewed-by: Eric Auger <eric.auger@xxxxxxxxxx>

Thanks

Eric

> ---
>  drivers/iommu/arm-smmu-v3.c | 55 ++++++++++++++++++++++++++++++++++++-
>  1 file changed, 54 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> index e62ca80f2f76..8e95ecad4c9a 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -2644,6 +2644,53 @@ static void arm_smmu_disable_ats(struct arm_smmu_master *master)
>  	atomic_dec(&smmu_domain->nr_ats_masters);
>  }
>  
> +static int arm_smmu_enable_pasid(struct arm_smmu_master *master)
> +{
> +	int ret;
> +	int features;
> +	int num_pasids;
> +	struct pci_dev *pdev;
> +
> +	if (!dev_is_pci(master->dev))
> +		return -ENODEV;
> +
> +	pdev = to_pci_dev(master->dev);
> +
> +	features = pci_pasid_features(pdev);
> +	if (features < 0)
> +		return features;
> +
> +	num_pasids = pci_max_pasids(pdev);
> +	if (num_pasids <= 0)
> +		return num_pasids;
> +
> +	ret = pci_enable_pasid(pdev, features);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to enable PASID\n");
> +		return ret;
> +	}
> +
> +	master->ssid_bits = min_t(u8, ilog2(num_pasids),
> +				  master->smmu->ssid_bits);
> +	return 0;
> +}
> +
> +static void arm_smmu_disable_pasid(struct arm_smmu_master *master)
> +{
> +	struct pci_dev *pdev;
> +
> +	if (!dev_is_pci(master->dev))
> +		return;
> +
> +	pdev = to_pci_dev(master->dev);
> +
> +	if (!pdev->pasid_enabled)
> +		return;
> +
> +	master->ssid_bits = 0;
> +	pci_disable_pasid(pdev);
> +}
> +
>  static void arm_smmu_detach_dev(struct arm_smmu_master *master)
>  {
>  	unsigned long flags;
> @@ -2852,13 +2899,16 @@ static int arm_smmu_add_device(struct device *dev)
>  
>  	master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits);
>  
> +	/* Note that PASID must be enabled before, and disabled after ATS */
> +	arm_smmu_enable_pasid(master);
> +
>  	if (!(smmu->features & ARM_SMMU_FEAT_2_LVL_CDTAB))
>  		master->ssid_bits = min_t(u8, master->ssid_bits,
>  					  CTXDESC_LINEAR_CDMAX);
>  
>  	ret = iommu_device_link(&smmu->iommu, dev);
>  	if (ret)
> -		goto err_free_master;
> +		goto err_disable_pasid;
>  
>  	group = iommu_group_get_for_dev(dev);
>  	if (IS_ERR(group)) {
> @@ -2871,6 +2921,8 @@ static int arm_smmu_add_device(struct device *dev)
>  
>  err_unlink:
>  	iommu_device_unlink(&smmu->iommu, dev);
> +err_disable_pasid:
> +	arm_smmu_disable_pasid(master);
>  err_free_master:
>  	kfree(master);
>  	fwspec->iommu_priv = NULL;
> @@ -2891,6 +2943,7 @@ static void arm_smmu_remove_device(struct device *dev)
>  	arm_smmu_detach_dev(master);
>  	iommu_group_remove_device(dev);
>  	iommu_device_unlink(&smmu->iommu, dev);
> +	arm_smmu_disable_pasid(master);
>  	kfree(master);
>  	iommu_fwspec_free(dev);
>  }
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux