This is the PHY chip for USB HSIC on MMP3 platform. Signed-off-by: Lubomir Rintel <lkundrak@xxxxx> --- .../bindings/phy/marvell,mmp3-hsic-phy.yaml | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml new file mode 100644 index 0000000000000..7917a95cda78d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# Copyright 2019 Lubomir Rintel <lkundrak@xxxxx> +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/marvell,mmp3-hsic-phy.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: Marvell MMP3 HSIC PHY + +maintainers: + - Lubomir Rintel <lkundrak@xxxxx> + +properties: + compatible: + const: marvell,mmp3-hsic-phy + + reg: + maxItems: 1 + description: base address of the device + + reset-gpios: + maxItems: 1 + description: GPIO connected to reset + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - reset-gpios + - "#phy-cells" + +examples: + - | + hsic-phy@f0001800 { + compatible = "marvell,mmp3-hsic-phy"; + reg = <0xf0001800 0x40>; + reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>; + #phy-cells = <0>; + }; -- 2.24.1
