With support for the MSM8996 UFS PHY added to the common QMP driver,
migrate the DTS to use the common QMP binding.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
Changes since v1:
- None
arch/arm64/boot/dts/qcom/msm8996.dtsi | 33 +++++++++++++++------------
1 file changed, 18 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index b302d2451007..330a1e7cb7d8 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1323,27 +1323,30 @@ spmi_bus: qcom,spmi@400f000 {
#interrupt-cells = <4>;
};
- ufsphy: phy@627000 {
- compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
- reg = <0x627000 0xda8>;
- reg-names = "phy_mem";
- #phy-cells = <0>;
+ ufs_phy: phy@627000 {
+ compatible = "qcom,msm8996-qmp-ufs-phy";
+ reg = <0x00627000 0x1c4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
vdda-phy-supply = <&pm8994_l28>;
vdda-pll-supply = <&pm8994_l12>;
-
- vdda-phy-max-microamp = <18380>;
- vdda-pll-max-microamp = <9440>;
-
vddp-ref-clk-supply = <&pm8994_l25>;
- vddp-ref-clk-max-microamp = <100>;
- vddp-ref-clk-always-on;
- clock-names = "ref_clk_src", "ref_clk";
- clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
- <&gcc GCC_UFS_CLKREF_CLK>;
+ clocks = <&gcc GCC_UFS_CLKREF_CLK>;
+ clock-names = "ref";
+
resets = <&ufshc 0>;
+ reset-names = "ufsphy";
status = "disabled";
+
+ ufs_phy_lane: lanes@627400 {
+ reg = <0x627400 0x12c>,
+ <0x627600 0x200>,
+ <0x627c00 0x1b4>;
+ #phy-cells = <0>;
+ };
};
ufshc: ufshc@624000 {
@@ -1351,7 +1354,7 @@ ufshc: ufshc@624000 {
reg = <0x624000 0x2500>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufsphy>;
+ phys = <&ufs_phy_lane>;
phy-names = "ufsphy";
vcc-supply = <&pm8994_l20>;
--
2.24.0
