Hi David,
Thank you for updating this patch series!
On 16.12.19 7:58, David Dai wrote:
Add bcm voter driver and add support for RPMh specific interconnect providers
which implements the set and aggregate functionalities that translates
bandwidth requests into RPMh messages. These modules provide a common set of
functionalities for all Qualcomm RPMh based interconnect providers and
should help reduce code duplication when adding new providers.
Signed-off-by: David Dai <daidavid1@xxxxxxxxxxxxxx>
Signed-off-by: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
Not really. Please remove.
---
drivers/interconnect/qcom/Kconfig | 8 +
drivers/interconnect/qcom/Makefile | 6 +
drivers/interconnect/qcom/bcm-voter.c | 356 ++++++++++++++++++++++++++++++++++
drivers/interconnect/qcom/bcm-voter.h | 28 +++
drivers/interconnect/qcom/icc-rpmh.c | 158 +++++++++++++++
drivers/interconnect/qcom/icc-rpmh.h | 150 ++++++++++++++
6 files changed, 706 insertions(+)
create mode 100644 drivers/interconnect/qcom/bcm-voter.c
create mode 100644 drivers/interconnect/qcom/bcm-voter.h
create mode 100644 drivers/interconnect/qcom/icc-rpmh.c
create mode 100644 drivers/interconnect/qcom/icc-rpmh.h
diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
index 2f9304d..e5af199 100644
--- a/drivers/interconnect/qcom/Kconfig
+++ b/drivers/interconnect/qcom/Kconfig
@@ -27,9 +27,17 @@ config INTERCONNECT_QCOM_SDM845
tristate "Qualcomm SDM845 interconnect driver"
depends on INTERCONNECT_QCOM
depends on (QCOM_RPMH && QCOM_COMMAND_DB && OF) || COMPILE_TEST
+ select INTERCONNECT_QCOM_RPMH
+ select INTERCONNECT_QCOM_BCM_VOTER
help
This is a driver for the Qualcomm Network-on-Chip on sdm845-based
platforms.
+config INTERCONNECT_QCOM_BCM_VOTER
+ tristate
+
+config INTERCONNECT_QCOM_RPMH
+ tristate
+
Let's try to keep alphabetical order, so move these up.
config INTERCONNECT_QCOM_SMD_RPM
tristate
diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
index 9adf9e3..e921b13 100644
--- a/drivers/interconnect/qcom/Makefile
+++ b/drivers/interconnect/qcom/Makefile
@@ -4,8 +4,14 @@ qnoc-msm8974-objs := msm8974.o
qnoc-qcs404-objs := qcs404.o
qnoc-sdm845-objs := sdm845.o
icc-smd-rpm-objs := smd-rpm.o
+icc-bcm-voter-objs := bcm-voter.o
+icc-rpmh-obj := icc-rpmh.o
+icc-smd-rpm-objs := smd-rpm.o
Duplicate? Please remove.
+obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o
+obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += qnoc-msm8916.o
Unrelated change?
obj-$(CONFIG_INTERCONNECT_QCOM_MSM8974) += qnoc-msm8974.o
obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o
+obj-$(CONFIG_INTERCONNECT_QCOM_RPMH) += icc-rpmh.o
obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o
obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o
diff --git a/drivers/interconnect/qcom/bcm-voter.c b/drivers/interconnect/qcom/bcm-voter.c
new file mode 100644
index 0000000..7a8764e
--- /dev/null
+++ b/drivers/interconnect/qcom/bcm-voter.c
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ */
+#include <linux/interconnect-provider.h>
+#include <linux/list_sort.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include <soc/qcom/rpmh.h>
+#include <soc/qcom/tcs.h>
+
+#include "bcm-voter.h"
+#include "icc-rpmh.h"
+
+static LIST_HEAD(bcm_voters);
+
+/**
+ * struct bcm_voter - Bus Clock Manager voter
+ * @dev: reference to the device that communicates with the BCM
+ * @np: reference to the device node to match bcm voters
+ * @lock: mutex to protect commit and wake/sleep lists in the voter
+ * @commit_list: list containing bcms to be committed to hardware
+ * @ws_list: list containing bcms that have different wake/sleep votes
+ * @voter_node: list of bcm voters
+ */
+struct bcm_voter {
+ struct device *dev;
+ struct device_node *np;
+ struct mutex lock;
+ struct list_head commit_list;
+ struct list_head ws_list;
+ struct list_head voter_node;
+};
+
+static int cmp_vcd(void *priv, struct list_head *a, struct list_head *b)
+{
+ const struct qcom_icc_bcm *bcm_a =
+ list_entry(a, struct qcom_icc_bcm, list);
+ const struct qcom_icc_bcm *bcm_b =
+ list_entry(b, struct qcom_icc_bcm, list);
+
+ if (bcm_a->aux_data.vcd < bcm_b->aux_data.vcd)
+ return -1;
+ else if (bcm_a->aux_data.vcd == bcm_b->aux_data.vcd)
+ return 0;
+ else
+ return 1;
+}
+
+static void bcm_aggregate(struct qcom_icc_bcm *bcm)
+{
+ size_t i, bucket;
+ u64 agg_avg[QCOM_ICC_NUM_BUCKETS] = {0};
+ u64 agg_peak[QCOM_ICC_NUM_BUCKETS] = {0};
+ u64 temp;
+
+ for (bucket = 0; bucket < QCOM_ICC_NUM_BUCKETS; bucket++) {
+ for (i = 0; i < bcm->num_nodes; i++) {
+ temp = bcm->nodes[i]->sum_avg[bucket] * bcm->aux_data.width;
+ do_div(temp, bcm->nodes[i]->buswidth * bcm->nodes[i]->channels);
+ agg_avg[bucket] = max(agg_avg[bucket], temp);
+
+ temp = bcm->nodes[i]->max_peak[bucket] * bcm->aux_data.width;
+ do_div(temp, bcm->nodes[i]->buswidth);
+ agg_peak[bucket] = max(agg_peak[bucket], temp);
+ }
+
+ temp = agg_avg[bucket] * 1000ULL;
+ do_div(temp, bcm->aux_data.unit);
+ bcm->vote_x[bucket] = temp;
+
+ temp = agg_peak[bucket] * 1000ULL;
+ do_div(temp, bcm->aux_data.unit);
+ bcm->vote_y[bucket] = temp;
+ }
+
+ if (bcm->keepalive && bcm->vote_x[QCOM_ICC_BUCKET_AMC] == 0 &&
+ bcm->vote_y[QCOM_ICC_BUCKET_AMC] == 0) {
+ bcm->vote_x[QCOM_ICC_BUCKET_AMC] = 1;
+ bcm->vote_x[QCOM_ICC_BUCKET_WAKE] = 1;
+ bcm->vote_y[QCOM_ICC_BUCKET_AMC] = 1;
+ bcm->vote_y[QCOM_ICC_BUCKET_WAKE] = 1;
+ }
+}
+
+static inline void tcs_cmd_gen(struct tcs_cmd *cmd, u64 vote_x, u64 vote_y,
+ u32 addr, bool commit)
+{
+ bool valid = true;
+
+ if (!cmd)
+ return;
+
+ if (vote_x == 0 && vote_y == 0)
+ valid = false;
+
+ if (vote_x > BCM_TCS_CMD_VOTE_MASK)
+ vote_x = BCM_TCS_CMD_VOTE_MASK;
+
+ if (vote_y > BCM_TCS_CMD_VOTE_MASK)
+ vote_y = BCM_TCS_CMD_VOTE_MASK;
+
+ cmd->addr = addr;
+ cmd->data = BCM_TCS_CMD(commit, valid, vote_x, vote_y);
+
+ /*
+ * Set the wait for completion flag on command that need to be completed
+ * before the next command.
+ */
+ if (commit)
+ cmd->wait = true;
+}
+
+static void tcs_list_gen(struct list_head *bcm_list, int bucket,
+ struct tcs_cmd tcs_list[MAX_VCD],
+ int n[MAX_VCD])
+{
+ struct qcom_icc_bcm *bcm;
+ bool commit;
+ size_t idx = 0, batch = 0, cur_vcd_size = 0;
+
+ memset(n, 0, sizeof(int) * MAX_VCD);
+
+ list_for_each_entry(bcm, bcm_list, list) {
+ commit = false;
+ cur_vcd_size++;
+ if ((list_is_last(&bcm->list, bcm_list)) ||
+ bcm->aux_data.vcd != list_next_entry(bcm, list)->aux_data.vcd) {
+ commit = true;
+ cur_vcd_size = 0;
+ }
+ tcs_cmd_gen(&tcs_list[idx], bcm->vote_x[bucket],
+ bcm->vote_y[bucket], bcm->addr, commit);
+ idx++;
+ n[batch]++;
+ /*
+ * Batch the BCMs in such a way that we do not split them in
+ * multiple payloads when they are under the same VCD. This is
+ * to ensure that every BCM is committed since we only set the
+ * commit bit on the last BCM request of every VCD.
+ */
+ if (n[batch] >= MAX_RPMH_PAYLOAD) {
+ if (!commit) {
+ n[batch] = cur_vcd_size;
+ n[batch + 1] = cur_vcd_size;
+ }
+ batch++;
+ }
+ }
+}
+
+/**
+ * of_bcm_voter_get - gets a bcm voter handle from DT node
+ * @dev: device pointer for the consumer device
+ * @name: name for the bcm voter device
+ *
+ * This function will match a device_node pointer for the phandle
+ * specified in the device DT and return a bcm_voter handle on success.
+ *
+ * Returns bcm_voter pointer or ERR_PTR() on error. EPROBE_DEFER is returned
+ * when matching bcm voter is yet to be found.
+ */
+struct bcm_voter *of_bcm_voter_get(struct device *dev, const char *name)
+{
+ struct bcm_voter *voter = ERR_PTR(-EPROBE_DEFER);
+ struct bcm_voter *temp;
+ struct device_node *np, *node;
+ int idx = 0;
+
+ if (!dev || !dev->of_node)
+ return ERR_PTR(-ENODEV);
+
+ np = dev->of_node;
+
+ if (name) {
+ idx = of_property_match_string(np, "qcom,bcm-voter-names", name);
+ if (idx < 0)
+ return ERR_PTR(idx);
+ }
+
+ node = of_parse_phandle(np, "qcom,bcm-voters", idx);
+
+ list_for_each_entry(temp, &bcm_voters, voter_node) {
+ if (temp->np == node) {
+ voter = temp;
+ break;
+ }
+ }
+
+ return voter;
+}
+EXPORT_SYMBOL_GPL(of_bcm_voter_get);
+
+/**
+ * qcom_icc_bcm_voter_add - queues up the bcm nodes that require updates
+ * @voter: voter that the bcms are being added to
+ * @bcm: bcm to add to the commit and wake sleep list
+ */
+void qcom_icc_bcm_voter_add(struct bcm_voter *voter, struct qcom_icc_bcm *bcm)
+{
+ if (!voter)
+ return;
+
+ mutex_lock(&voter->lock);
+ list_add_tail(&bcm->list, &voter->commit_list);
Isn't there a problem if we try to add the same bcm to the commit list?
+
+ if (list_empty(&bcm->ws_list))
+ list_add_tail(&bcm->ws_list, &voter->ws_list);
+
+ mutex_unlock(&voter->lock);
+}
+EXPORT_SYMBOL_GPL(qcom_icc_bcm_voter_add);
+
+/**
+ * qcom_icc_bcm_voter_commit - generates and commits tcs cmds based on bcms
+ * @voter: voter that needs flushing
+ *
+ * This function generates a set of AMC commands and flushes to the BCM device
+ * associated with the voter. It conditionally generate WAKE and SLEEP commands
+ * based on deltas between WAKE/SLEEP requirements. The ws_list persists
+ * through multiple commit requests and bcm nodes are removed only when the
+ * requirements for WAKE matches SLEEP.
+ *
+ * Returns 0 on success, or an appropriate error code otherwise.
+ */
+int qcom_icc_bcm_voter_commit(struct bcm_voter *voter)
+{
+ struct qcom_icc_bcm *bcm;
+ struct qcom_icc_bcm *bcm_tmp;
+ int commit_idx[MAX_VCD];
+ struct tcs_cmd cmds[MAX_BCMS];
+ int ret = 0;
+
+ if (!voter)
+ return 0;
+
+ mutex_lock(&voter->lock);
+ list_for_each_entry(bcm, &voter->commit_list, list)
+ bcm_aggregate(bcm);
+
+ /*
+ * Pre sort the BCMs based on VCD for ease of generating a command list
+ * that groups the BCMs with the same VCD together. VCDs are numbered
+ * with lowest being the most expensive time wise, ensuring that
+ * those commands are being sent the earliest in the queue. This needs
+ * to be sorted every commit since we can't guarantee the order in which
+ * the BCMs are added to the list.
+ */
+ list_sort(NULL, &voter->commit_list, cmp_vcd);
+
+ /*
+ * Construct the command list based on a pre ordered list of BCMs
+ * based on VCD.
+ */
+ tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_AMC, cmds, commit_idx);
+
+ if (!commit_idx[0])
+ goto out;
+
+ ret = rpmh_invalidate(voter->dev);
+ if (ret) {
+ pr_err("Error invalidating RPMH client (%d)\n", ret);
+ goto out;
+ }
+
+ ret = rpmh_write_batch(voter->dev, RPMH_ACTIVE_ONLY_STATE,
+ cmds, commit_idx);
+ if (ret) {
+ pr_err("Error sending AMC RPMH requests (%d)\n", ret);
+ goto out;
+ }
+
+ INIT_LIST_HEAD(&voter->commit_list);
+
+ list_for_each_entry_safe(bcm, bcm_tmp, &voter->ws_list, ws_list) {
+ /*
+ * Only generate WAKE and SLEEP commands if a resource's
+ * requirements change as the execution environment transitions
+ * between different power states.
+ */
+ if (bcm->vote_x[QCOM_ICC_BUCKET_WAKE] !=
+ bcm->vote_x[QCOM_ICC_BUCKET_SLEEP] ||
+ bcm->vote_y[QCOM_ICC_BUCKET_WAKE] !=
+ bcm->vote_y[QCOM_ICC_BUCKET_SLEEP])
+ list_add_tail(&bcm->list, &voter->commit_list);
+ else
+ list_del_init(&bcm->ws_list);
+ }
+
+ if (list_empty(&voter->commit_list))
+ goto out;
+
+ list_sort(NULL, &voter->commit_list, cmp_vcd);
+
+ tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_WAKE, cmds, commit_idx);
+
+ ret = rpmh_write_batch(voter->dev, RPMH_WAKE_ONLY_STATE, cmds, commit_idx);
+ if (ret) {
+ pr_err("Error sending WAKE RPMH requests (%d)\n", ret);
+ goto out;
+ }
+
+ tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_SLEEP, cmds, commit_idx);
+
+ ret = rpmh_write_batch(voter->dev, RPMH_SLEEP_STATE, cmds, commit_idx);
+ if (ret) {
+ pr_err("Error sending SLEEP RPMH requests (%d)\n", ret);
+ goto out;
+ }
+
+out:
+ INIT_LIST_HEAD(&voter->commit_list);
+ mutex_unlock(&voter->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_bcm_voter_commit);
+
+static int qcom_icc_bcm_voter_probe(struct platform_device *pdev)
+{
+ struct bcm_voter *voter;
+
+ voter = devm_kzalloc(&pdev->dev, sizeof(*voter), GFP_KERNEL);
+ if (!voter)
+ return -ENOMEM;
+
+ voter->dev = &pdev->dev;
+ voter->np = pdev->dev.of_node;
+ mutex_init(&voter->lock);
+ INIT_LIST_HEAD(&voter->commit_list);
+ INIT_LIST_HEAD(&voter->ws_list);
+ list_add_tail(&voter->voter_node, &bcm_voters);
+
+ return 0;
+}
+
+static const struct of_device_id bcm_voter_of_match[] = {
+ { .compatible = "qcom,sdm845-bcm-voter" },
+ { },
+};
+
+static struct platform_driver qcom_icc_bcm_voter_driver = {
+ .probe = qcom_icc_bcm_voter_probe,
+ .driver = {
+ .name = "sdm845_bcm_voter",
+ .of_match_table = bcm_voter_of_match,
+ },
+};
+module_platform_driver(qcom_icc_bcm_voter_driver);
+MODULE_AUTHOR("David Dai <daidavid1@xxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Qualcomm BCM Voter interconnect driver");
+MODULE_LICENSE("GPL v2");
+
diff --git a/drivers/interconnect/qcom/bcm-voter.h b/drivers/interconnect/qcom/bcm-voter.h
new file mode 100644
index 0000000..bb687b7
--- /dev/null
+++ b/drivers/interconnect/qcom/bcm-voter.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_BCM_VOTER_H__
+#define __DRIVERS_INTERCONNECT_QCOM_ICC_BCM_VOTER_H__
This doesn't match the path and filename.
+
+#include <soc/qcom/cmd-db.h>
+#include <soc/qcom/rpmh.h>
+#include <soc/qcom/tcs.h>
+
+#include "icc-rpmh.h"
+
+#define DEFINE_QBCM(_name, _bcmname, _keepalive, _numnodes, ...) \
+ static struct qcom_icc_bcm _name = { \
+ .name = _bcmname, \
+ .keepalive = _keepalive, \
+ .num_nodes = _numnodes, \
+ .nodes = { __VA_ARGS__ }, \
+ }
+
+struct bcm_voter *of_bcm_voter_get(struct device *dev, const char *name);
+void qcom_icc_bcm_voter_add(struct bcm_voter *voter, struct qcom_icc_bcm *bcm);
+int qcom_icc_bcm_voter_commit(struct bcm_voter *voter);
+
+#endif
diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c
new file mode 100644
index 0000000..0041deb
--- /dev/null
+++ b/drivers/interconnect/qcom/icc-rpmh.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#include <asm/div64.h>
+#include <dt-bindings/interconnect/qcom,sdm845.h>
+#include <linux/interconnect.h>
+#include <linux/interconnect-provider.h>
+#include <linux/module.h>
+
+#include "icc-rpmh.h"
+#include "bcm-voter.h"
Move above icc-rpmh.h to keep the alphabetical order.
+
+/**
+ * qcom_icc_pre_aggregate - cleans up stale values from prior icc_set
+ * @node: icc node to operate on
+ */
+void qcom_icc_pre_aggregate(struct icc_node *node)
+{
+ size_t i;
+ struct qcom_icc_node *qn;
+
+ qn = node->data;
+
+ for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+ qn->sum_avg[i] = 0;
+ qn->max_peak[i] = 0;
+ }
+}
+EXPORT_SYMBOL_GPL(qcom_icc_pre_aggregate); > +
+/**
+ * qcom_icc_aggregate - aggregate bw for buckets indicated by tag
+ * @node: node to aggregate
+ * @tag: tag to indicate which buckets to aggregate
+ * @avg_bw: new bw to sum aggregate
+ * @peak_bw: new bw to max aggregate
+ * @agg_avg: existing aggregate avg bw val
+ * @agg_peak: existing aggregate peak bw val
+ */
+int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
+ u32 peak_bw, u32 *agg_avg, u32 *agg_peak)
+{
+ size_t i;
+ struct qcom_icc_node *qn;
+ struct qcom_icc_provider *qp;
+
+ qn = node->data;
+ qp = to_qcom_provider(node->provider);
+
+ if (!tag)
+ tag = QCOM_ICC_TAG_ALWAYS;
+
+ for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+ if (tag & BIT(i)) {
+ qn->sum_avg[i] += avg_bw;
+ qn->max_peak[i] = max_t(u32, qn->max_peak[i], peak_bw);
+ }
+ }
+
+ *agg_avg += avg_bw;
+ *agg_peak = max_t(u32, *agg_peak, peak_bw);
+
+ for (i = 0; i < qn->num_bcms; i++)
+ qcom_icc_bcm_voter_add(qp->voter, qn->bcms[i]);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_aggregate);
+
+/**
+ * qcom_icc_set - set the constraints based on path
+ * @src: source node for the path to set constraints on
+ * @dst: destination node for the path to set constraints on
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
+{
+ struct qcom_icc_provider *qp;
+ struct icc_node *node;
+ int ret = 0;
+
+ if (!src)
+ node = dst;
+ else
+ node = src;
+
+ qp = to_qcom_provider(node->provider);
+
+ qcom_icc_bcm_voter_commit(qp->voter);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_set);
+
+/**
+ * qcom_icc_bcm_init - populates bcm aux data and connect qnodes
+ * @bcm: bcm to be initialized
+ * @dev: associated provider device
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev)
+{
+ struct qcom_icc_node *qn;
+ const struct bcm_db *data;
+ size_t data_count;
+ int i;
+
+ bcm->addr = cmd_db_read_addr(bcm->name);
+ if (!bcm->addr) {
+ dev_err(dev, "%s could not find RPMh address\n",
+ bcm->name);
+ return -EINVAL;
+ }
+
+ data = cmd_db_read_aux_data(bcm->name, &data_count);
+ if (IS_ERR(data)) {
+ dev_err(dev, "%s command db read error (%ld)\n",
+ bcm->name, PTR_ERR(data));
+ return PTR_ERR(data);
+ }
+ if (!data_count) {
+ dev_err(dev, "%s command db missing or partial aux data\n",
+ bcm->name);
+ return -EINVAL;
+ }
+
+ bcm->aux_data.unit = le32_to_cpu(data->unit);
+ bcm->aux_data.width = le16_to_cpu(data->width);
+ bcm->aux_data.vcd = data->vcd;
+ bcm->aux_data.reserved = data->reserved;
+ INIT_LIST_HEAD(&bcm->list);
+ INIT_LIST_HEAD(&bcm->ws_list);
+
+ /*
+ * Link Qnodes to their respective BCMs
+ */
+ for (i = 0; i < bcm->num_nodes; i++) {
+ qn = bcm->nodes[i];
+ qn->bcms[qn->num_bcms] = bcm;
+ qn->num_bcms++;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_bcm_init);
+
+static struct platform_driver qcom_icc_rpmh_driver = {
+ .driver = {
+ .name = "icc_rpmh",
+ },
+};
+module_platform_driver(qcom_icc_rpmh_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/interconnect/qcom/icc-rpmh.h b/drivers/interconnect/qcom/icc-rpmh.h
new file mode 100644
index 0000000..b32c7e3
--- /dev/null
+++ b/drivers/interconnect/qcom/icc-rpmh.h
@@ -0,0 +1,150 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__
+#define __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__
+
+#define to_qcom_provider(_provider) \
+ container_of(_provider, struct qcom_icc_provider, provider)
+
+/**
+ * struct qcom_icc_provider - Qualcomm specific interconnect provider
+ * @dev: reference to the NoC device
+ * @bcms: list of bcms that maps to the provider
+ * @num_bcms: number of @bcms
+ * @voter: bcm voter targeted by this provider
+ */
+struct qcom_icc_provider {
+ struct icc_provider provider;
This is missing in the kerneldoc above.
+ struct device *dev;
+ struct qcom_icc_bcm **bcms;
+ size_t num_bcms;
+ struct bcm_voter *voter;
+};
+
+/**
+ * struct bcm_db - Auxiliary data pertaining to each Bus Clock Manager (BCM)
+ * @unit: divisor used to convert bytes/sec bw value to an RPMh msg
+ * @width: multiplier used to convert bytes/sec bw value to an RPMh msg
+ * @vcd: virtual clock domain that this bcm belongs to
+ * @reserved: reserved field
+ */
+struct bcm_db {
+ __le32 unit;
+ __le16 width;
+ u8 vcd;
+ u8 reserved;
+};
+
+#define MAX_LINKS 128
+#define MAX_BCMS 64
+#define MAX_BCM_PER_NODE 3
+#define MAX_VCD 10
+
+/*
+ * The AMC bucket denotes constraints that are applied to hardware when
+ * icc_set_bw() completes, whereas the WAKE and SLEEP constraints are applied
+ * when the execution environment transitions between active and low power mode.
+ */
+#define QCOM_ICC_BUCKET_AMC 0
+#define QCOM_ICC_BUCKET_WAKE 1
+#define QCOM_ICC_BUCKET_SLEEP 2
+#define QCOM_ICC_NUM_BUCKETS 3
+#define QCOM_ICC_TAG_AMC BIT(QCOM_ICC_BUCKET_AMC)
+#define QCOM_ICC_TAG_WAKE BIT(QCOM_ICC_BUCKET_WAKE)
+#define QCOM_ICC_TAG_SLEEP BIT(QCOM_ICC_BUCKET_SLEEP)
+#define QCOM_ICC_TAG_ACTIVE_ONLY (QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE)
Seems unused?
+#define QCOM_ICC_TAG_ALWAYS (QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE |\
+ QCOM_ICC_TAG_SLEEP)
+
+/**
+ * struct qcom_icc_node - Qualcomm specific interconnect nodes
+ * @name: the node name used in debugfs
+ * @links: an array of nodes where we can go next while traversing
+ * @id: a unique node identifier
+ * @num_links: the total number of @links
+ * @channels: num of channels at this node
+ * @buswidth: width of the interconnect between a node and the bus
+ * @sum_avg: current sum aggregate value of all avg bw requests
+ * @max_peak: current max aggregate value of all peak bw requests
+ * @bcms: list of bcms associated with this logical node
+ * @num_bcms: num of @bcms
+ */
+struct qcom_icc_node {
+ const char *name;
+ u16 links[MAX_LINKS];
+ u16 id;
+ u16 num_links;
+ u16 channels;
+ u16 buswidth;
+ u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
+ u64 max_peak[QCOM_ICC_NUM_BUCKETS];
+ struct qcom_icc_bcm *bcms[MAX_BCM_PER_NODE];
+ size_t num_bcms;
+};
+
+/**
+ * struct qcom_icc_bcm - Qualcomm specific hardware accelerator nodes
+ * known as Bus Clock Manager (BCM)
+ * @name: the bcm node name used to fetch BCM data from command db
+ * @type: latency or bandwidth bcm
+ * @addr: address offsets used when voting to RPMH
+ * @vote_x: aggregated threshold values, represents sum_bw when @type is bw bcm
+ * @vote_y: aggregated threshold values, represents peak_bw when @type is bw bcm
+ * @dirty: flag used to indicate whether the bcm needs to be committed
+ * @keepalive: flag used to indicate whether a keepalive is required
+ * @aux_data: auxiliary data used when calculating threshold values and
+ * communicating with RPMh
+ * @list: used to link to other bcms when compiling lists for commit
+ * @ws_list: used to keep track of bcms that may transition between wake/sleep
+ * @num_nodes: total number of @num_nodes
+ * @nodes: list of qcom_icc_nodes that this BCM encapsulates
+ */
+struct qcom_icc_bcm {
+ const char *name;
+ u32 type;
+ u32 addr;
+ u64 vote_x[QCOM_ICC_NUM_BUCKETS];
+ u64 vote_y[QCOM_ICC_NUM_BUCKETS];
+ bool dirty;
+ bool keepalive;
+ struct bcm_db aux_data;
+ struct list_head list;
+ struct list_head ws_list;
+ size_t num_nodes;
+ struct qcom_icc_node *nodes[];
+};
+
+struct qcom_icc_fabric {
+ struct qcom_icc_node **nodes;
+ size_t num_nodes;
+};
+
+struct qcom_icc_desc {
+ struct qcom_icc_node **nodes;
+ size_t num_nodes;
+ struct qcom_icc_bcm **bcms;
+ size_t num_bcms;
+};
+
+#define DEFINE_QNODE(_name, _id, _channels, _buswidth, \
+ _numlinks, ...) \
+ static struct qcom_icc_node _name = { \
+ .id = _id, \
+ .name = #_name, \
+ .channels = _channels, \
+ .buswidth = _buswidth, \
+ .num_links = _numlinks, \
+ .links = { __VA_ARGS__ }, \
+ }
+
+int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
+ u32 peak_bw, u32 *agg_avg, u32 *agg_peak);
Nit: Please align to the open parenthesis.
+int qcom_icc_set(struct icc_node *src, struct icc_node *dst);
+int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev);
+void qcom_icc_pre_aggregate(struct icc_node *node);
+
+#endif
Thanks,
Georgi
