Add a new modem compatible string for Qualcomm SC7180 SoCs and introduce the "qcom,halt-nav-regs" bindings needed by the modem sub-system running on SC7180 SoCs. Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx> --- .../bindings/remoteproc/qcom,q6v5.txt | 23 +++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index c416746f93cfd..88dfa3fc15f78 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -13,6 +13,7 @@ on the Qualcomm Hexagon core. "qcom,msm8974-mss-pil" "qcom,msm8996-mss-pil" "qcom,msm8998-mss-pil" + "qcom,sc7180-mss-pil" "qcom,sdm845-mss-pil" - reg: @@ -43,6 +44,7 @@ on the Qualcomm Hexagon core. must be "wdog", "fatal", "ready", "handover", "stop-ack" qcom,msm8996-mss-pil: qcom,msm8998-mss-pil: + qcom,sc7180-mss-pil: qcom,sdm845-mss-pil: must be "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack" @@ -75,6 +77,9 @@ on the Qualcomm Hexagon core. qcom,msm8998-mss-pil: must be "iface", "bus", "mem", "xo", "gpll0_mss", "snoc_axi", "mnoc_axi", "qdss" + qcom,sc7180-mss-pil: + must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi", + "mss_crypto", "mss_nav", "nav" qcom,sdm845-mss-pil: must be "iface", "bus", "mem", "xo", "gpll0_mss", "snoc_axi", "mnoc_axi", "prng" @@ -86,7 +91,7 @@ on the Qualcomm Hexagon core. reference to the list of 3 reset-controllers for the wcss sub-system reference to the list of 2 reset-controllers for the modem - sub-system on SDM845 SoCs + sub-system on SC7180, SDM845 SoCs - reset-names: Usage: required @@ -95,7 +100,7 @@ on the Qualcomm Hexagon core. must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset" for the wcss sub-system must be "mss_restart", "pdc_reset" for the modem - sub-system on SDM845 SoCs + sub-system on SC7180, SDM845 SoCs For the compatible strings below the following supplies are required: "qcom,q6v5-pil" @@ -144,6 +149,7 @@ For the compatible string below the following supplies are required: qcom,msm8996-mss-pil: qcom,msm8998-mss-pil: must be "cx", "mx" + qcom,sc7180-mss-pil: qcom,sdm845-mss-pil: must be "cx", "mx", "mss", "load_state" @@ -165,6 +171,19 @@ For the compatible string below the following supplies are required: by the three offsets within syscon for q6, modem and nc halt registers. +For the compatible strings below the following phandle references are required: + "qcom,sc7180-mss-pil" +- qcom,halt-nav-regs: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to a list of 2 phandles with one offset each for + the modem sub-system running on SC7180 SoC. The first + phandle reference is to the mss clock node followed by the + offset within register space for nav halt register. The + second phandle reference is to a syscon representing TCSR + followed by the offset within syscon for conn_box_spare0 + register. + = SUBNODES: The Hexagon node must contain two subnodes, named "mba" and "mpss" representing the memory regions used by the Hexagon firmware. Each sub-node must contain: -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
