From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
This series includes support for having the Real Time Clock trigger
capability for the Analog to Digital Converter in sama5d2-based SoCs
(RTC ADC Trigger)
The first patch of the series has been already submitted on the iio mailing list
as
[PATCH] iio: adc: at91-sama5d2_adc: update for other trigger usage
But I also include here for reference since the other commits on the driver
use this as a base commit.
In short, the RTC block can trigger the ADC block to perform a conversion.
To solve this, I created a driver named rtc-adc-trigger that shares the
register map with the RTC. It's done in devicetree as a subnode.
This driver will register a separate trigger inside the iio subsystem.
This trigger can then be associated to the ADC driver (sysfs current_trigger).
However, this is not enough. The ADC has to be aware that it;s being
triggered by the RTC (TRGMOD and TRGSEL). So, this hardware link between
the two IPs has been described as a phandle reference in the ADC node to the
RTC trigger node.
At runtime (trigger selection), the ADC will check if the assigned trigger
is the RTC one given by the phandle link. If so, it will configure
accordingly.
The RTC trigger driver will also register to sysfs two attributes for
selecting the desired trigger frequency.
One attribute is RO : list of possible frequencies.
Another attribute is RW: current set frequency.
To achieve all this, had to make a small patch on the RTC to populate
child nodes platform data to probe them.
Fixed other issues with the adc driver: unfinished conversions on IRQ in
triggered mode, and differential channels missing configurations in
triggered mode.
For exercising this, created DT patches for sama5d2/sama5d2_xplained.
Here is a sample of how it works in sysfs:
# cat /sys/bus/iio/devices/trigger0/trigger_frequency_hz
1
# echo 1 > /sys/bus/iio/devices/iio:device0/scan_elements/in_voltage4_en
# cat /sys/bus/iio/devices/
iio:device0/ iio_sysfs_trigger/ trigger0/ trigger1/
# cat /sys/bus/iio/devices/trigger0/name
f80480b0.at91_rtc_adc
# iio_generic_buffer -n fc030000.adc -t f80480b0.at91_rtc_adc -c 5
iio device number being used is 0
iio trigger number being used is 0
/sys/bus/iio/devices/iio:device0 f80480b0.at91_rtc_adc
3298.388672
3294.360352
3291.943359
3294.360352
3291.943359
Future work:
In the future the node would have to be enabled for other sama5d2 based
boards as well, and MAINTAINERS to be updated if this driver is accepted.
Eugen Hristev (10):
iio: adc: at91-sama5d2_adc: update for other trigger usage
dt-bindings: iio: adc: at91-sama5d2: add rtc-trigger optional property
dt-bindings: iio: trigger: at91-rtc-trigger: add bindings
rtc: at91rm9200: use of_platform_populate as return value
iio: trigger: at91-rtc-trigger: introduce at91 rtc adc trigger driver
iio: adc: at91-sama5d2_adc: handle unfinished conversions
iio: adc: at91-sama5d2_adc: fix differential channels in triggered
mode
iio: adc: at91-sama5d2_adc: implement RTC triggering
ARM: dts: at91: sama5d2: add rtc_adc_trigger node
ARM: dts: at91: sama5d2_xplained: enable rtc_adc_trigger
.../bindings/iio/adc/at91-sama5d2_adc.txt | 4 +
.../bindings/iio/trigger/at91-rtc-trigger.yaml | 44 +++
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 +
arch/arm/boot/dts/sama5d2.dtsi | 11 +
drivers/iio/adc/at91-sama5d2_adc.c | 336 ++++++++++++++++-----
drivers/iio/trigger/Kconfig | 10 +
drivers/iio/trigger/Makefile | 1 +
drivers/iio/trigger/at91-rtc-trigger.c | 213 +++++++++++++
drivers/rtc/rtc-at91rm9200.c | 2 +-
9 files changed, 543 insertions(+), 82 deletions(-)
create mode 040000 Documentation/devicetree/bindings/iio/trigger
create mode 100644 Documentation/devicetree/bindings/iio/trigger/at91-rtc-trigger.yaml
create mode 100644 drivers/iio/trigger/at91-rtc-trigger.c
--
2.7.4
