Re: [PATCH v2 4/6] usb: dwc3: Add Amlogic A1 DWC3 glue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 18/12/2019 03:42, Hanjie Lin wrote:
> Adds support for Amlogic A1 USB Control Glue HW.
> 
> The Amlogic A1 SoC Family embeds 1 USB Controllers:
> - a DWC3 IP configured as Host for USB2 and USB3
> 
> A glue connects the controllers to the USB2 PHY of A1 SoC.
> 
> Signed-off-by: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
> Signed-off-by: Yue Wang <yue.wang@xxxxxxxxxxx>
> ---
>  drivers/usb/dwc3/dwc3-meson-g12a.c | 69 +++++++++++++++++++++++++++-----------
>  1 file changed, 49 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
> index 8a3ec1a..3817daf 100644
> --- a/drivers/usb/dwc3/dwc3-meson-g12a.c
> +++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
> @@ -107,10 +107,22 @@ static const char *phy_names[PHY_COUNT] = {
>  	"usb2-phy0", "usb2-phy1", "usb3-phy0",
>  };
>  
> +static const struct clk_bulk_data meson_g12a_clocks[] = {
> +	{ .id = NULL},
> +};
> +
> +static const struct clk_bulk_data meson_a1_clocks[] = {
> +	{ .id = "usb_ctrl"},
> +	{ .id = "usb_bus"},
> +	{ .id = "xtal_usb_phy"},
> +	{ .id = "xtal_usb_ctrl"},
> +};
> +
>  struct dwc3_meson_g12a {
>  	struct device		*dev;
>  	struct regmap		*regmap;
> -	struct clk		*clk;
> +	struct clk_bulk_data    *clks;
> +	int num_clks;
>  	struct reset_control	*reset;
>  	struct phy		*phys[PHY_COUNT];
>  	enum usb_dr_mode	otg_mode;
> @@ -151,7 +163,7 @@ static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv)
>  				   U2P_R0_POWER_ON_RESET,
>  				   U2P_R0_POWER_ON_RESET);
>  
> -		if (i == USB2_OTG_PHY) {
> +		if (i == USB2_OTG_PHY && priv->otg_mode != USB_DR_MODE_HOST) {

This is wrong for G12A, please use something else to exclude PULLUPP/VBUS to be updated on A1.

>  			regmap_update_bits(priv->regmap,
>  				U2P_R0 + (U2P_REG_SIZE * i),
>  				U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS,
> @@ -295,7 +307,7 @@ static int dwc3_meson_g12a_otg_mode_set(struct dwc3_meson_g12a *priv,
>  {
>  	int ret;
>  
> -	if (!priv->phys[USB2_OTG_PHY])
> +	if (!priv->phys[USB2_OTG_PHY] || priv->otg_mode == USB_DR_MODE_HOST)

Same, this is wrong on G12A since a Host port can be switched to device, use something
else to disable this for A1, like setting a "otg_supported" flag into the match data,
and using it in dwc3_meson_g12a_usb2_init(), avoiding registering usb_role_switch, the
IRQ and updating the priv->otg_mode in probe().

>  		return -EINVAL;
>  
>  	if (mode == PHY_MODE_USB_HOST)
> @@ -409,17 +421,32 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
>  		priv->vbus = NULL;
>  	}
>  
> -	priv->clk = devm_clk_get(dev, NULL);
> -	if (IS_ERR(priv->clk))
> -		return PTR_ERR(priv->clk);
> +	priv->dev = dev;
> +
> +	if (of_device_is_compatible(np, "amlogic,meson-g12a-usb-ctrl")) {
> +		priv->clks = devm_kmemdup(dev, meson_g12a_clocks,
> +					  sizeof(meson_g12a_clocks),
> +					  GFP_KERNEL);
> +		priv->num_clks = ARRAY_SIZE(meson_g12a_clocks);
> +	} else if (of_device_is_compatible(np, "amlogic,meson-a1-usb-ctrl")) {
> +		priv->clks = devm_kmemdup(dev, meson_a1_clocks,
> +					  sizeof(meson_a1_clocks),
> +					  GFP_KERNEL);
> +		priv->num_clks = ARRAY_SIZE(meson_a1_clocks);
> +	} else {
> +		return -EINVAL;
> +	}

Like the PHY driver, please use of_device_get_match_data() and a match data for each compatible instead.

> +
> +	if (!priv->clks)
> +		return -ENOMEM;
>  
> -	ret = clk_prepare_enable(priv->clk);
> +	ret = devm_clk_bulk_get(dev, priv->num_clks, priv->clks);
>  	if (ret)
>  		return ret;
>  
> -	devm_add_action_or_reset(dev,
> -				 (void(*)(void *))clk_disable_unprepare,
> -				 priv->clk);
> +	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
> +	if (ret)
> +		return ret;
>  
>  	platform_set_drvdata(pdev, priv);
>  	priv->dev = dev;
> @@ -433,16 +460,16 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
>  
>  	ret = reset_control_reset(priv->reset);
>  	if (ret)
> -		return ret;
> +		goto err_disable_clks;
>  
>  	ret = dwc3_meson_g12a_get_phys(priv);
>  	if (ret)
> -		return ret;
> +		goto err_disable_clks;
>  
>  	if (priv->vbus) {
>  		ret = regulator_enable(priv->vbus);
>  		if (ret)
> -			return ret;
> +			goto err_disable_clks;
>  	}
>  
>  	/* Get dr_mode */
> @@ -458,7 +485,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
>  						dwc3_meson_g12a_irq_thread,
>  						IRQF_ONESHOT, pdev->name, priv);
>  		if (ret)
> -			return ret;
> +			goto err_disable_clks;
>  	}
>  
>  	dwc3_meson_g12a_usb_init(priv);
> @@ -467,7 +494,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
>  	for (i = 0 ; i < PHY_COUNT ; ++i) {
>  		ret = phy_init(priv->phys[i]);
>  		if (ret)
> -			return ret;
> +			goto err_disable_clks;
>  	}
>  
>  	/* Set PHY Power */
> @@ -478,10 +505,8 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
>  	}
>  
>  	ret = of_platform_populate(np, NULL, NULL, dev);
> -	if (ret) {
> -		clk_disable_unprepare(priv->clk);
> +	if (ret)
>  		goto err_phys_power;
> -	}
>  
>  	/* Setup OTG mode corresponding to the ID pin */
>  	if (priv->otg_mode == USB_DR_MODE_OTG) {
> @@ -518,6 +543,9 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
>  	for (i = 0 ; i < PHY_COUNT ; ++i)
>  		phy_exit(priv->phys[i]);
>  
> +err_disable_clks:
> +	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> +
>  	return ret;
>  }
>  
> @@ -547,7 +575,7 @@ static int __maybe_unused dwc3_meson_g12a_runtime_suspend(struct device *dev)
>  {
>  	struct dwc3_meson_g12a	*priv = dev_get_drvdata(dev);
>  
> -	clk_disable(priv->clk);
> +	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
>  
>  	return 0;
>  }
> @@ -556,7 +584,7 @@ static int __maybe_unused dwc3_meson_g12a_runtime_resume(struct device *dev)
>  {
>  	struct dwc3_meson_g12a	*priv = dev_get_drvdata(dev);
>  
> -	return clk_enable(priv->clk);
> +	return clk_bulk_prepare_enable(priv->num_clks, priv->clks);
>  }
>  
>  static int __maybe_unused dwc3_meson_g12a_suspend(struct device *dev)
> @@ -620,6 +648,7 @@ static const struct dev_pm_ops dwc3_meson_g12a_dev_pm_ops = {
>  
>  static const struct of_device_id dwc3_meson_g12a_match[] = {
>  	{ .compatible = "amlogic,meson-g12a-usb-ctrl" },
> +	{ .compatible = "amlogic,meson-a1-usb-ctrl" },
>  	{ /* Sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, dwc3_meson_g12a_match);
> 


Thanks,
Neil



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux