Re: [PATCH] arm: dts: apq8084: Fix tsens kernel panic during boot and kernel warnings due to IRQ_TYPE_NONE interrupt type

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue 17 Dec 15:52 PST 2019, Victhor Foster wrote:

> This patch fixes a kernel panic on the tsens driver that prevented APQ8084 platforms from booting, by adding a missing register property and the number of sensors

I was under the impression that the tsens driver did maintain backwards
compatibility wrt a single reg cell...

> , corrects all instances of IRQ_TYPE_NONE in interrupts, to avoid causing kernel warnings during boot, and also changes most interrupt properties to their respective macros, as defined by arm-gic.h.
> 
> Signed-off by: Victhor Foster <victhor.foster@xxxxxxx>

The content looks good, but can you please split it in two; one for the
tsens change and one for the interrupts cells? And please limit your
commit message to 72 chars.

Thanks,
Bjorn

> ---
>  arch/arm/boot/dts/qcom-apq8084.dtsi | 43 +++++++++++++++--------------
>  1 file changed, 23 insertions(+), 20 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
> index 0a0fb147ebb9..dc4ea3a8dc6d 100644
> --- a/arch/arm/boot/dts/qcom-apq8084.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
> @@ -1,6 +1,7 @@
>  // SPDX-License-Identifier: GPL-2.0
>  /dts-v1/;
>  
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/clock/qcom,gcc-apq8084.h>
>  #include <dt-bindings/gpio/gpio.h>
>  
> @@ -184,7 +185,7 @@
>  
>  	cpu-pmu {
>  		compatible = "qcom,krait-pmu";
> -		interrupts = <1 7 0xf04>;
> +		interrupts = <GIC_PPI 7 0xf04>;
>  	};
>  
>  	clocks {
> @@ -203,10 +204,10 @@
>  
>  	timer {
>  		compatible = "arm,armv7-timer";
> -		interrupts = <1 2 0xf08>,
> -			     <1 3 0xf08>,
> -			     <1 4 0xf08>,
> -			     <1 1 0xf08>;
> +		interrupts = <GIC_PPI 2 0xf08>,
> +			     <GIC_PPI 3 0xf08>,
> +			     <GIC_PPI 4 0xf08>,
> +			     <GIC_PPI 1 0xf08>;
>  		clock-frequency = <19200000>;
>  	};
>  
> @@ -253,9 +254,11 @@
>  
>  		tsens: thermal-sensor@fc4a8000 {
>  			compatible = "qcom,msm8974-tsens";
> -			reg = <0xfc4a8000 0x2000>;
> +			reg = <0xfc4a9000 0x1000>, /* TM */
> +			      <0xfc4a8000 0x1000>; /* SROT */
>  			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
>  			nvmem-cell-names = "calib", "calib_backup";
> +			#qcom,sensors = <11>;
>  			#thermal-sensor-cells = <1>;
>  		};
>  
> @@ -269,50 +272,50 @@
>  
>  			frame@f9021000 {
>  				frame-number = <0>;
> -				interrupts = <0 8 0x4>,
> -					     <0 7 0x4>;
> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>  				reg = <0xf9021000 0x1000>,
>  				      <0xf9022000 0x1000>;
>  			};
>  
>  			frame@f9023000 {
>  				frame-number = <1>;
> -				interrupts = <0 9 0x4>;
> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>  				reg = <0xf9023000 0x1000>;
>  				status = "disabled";
>  			};
>  
>  			frame@f9024000 {
>  				frame-number = <2>;
> -				interrupts = <0 10 0x4>;
> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>  				reg = <0xf9024000 0x1000>;
>  				status = "disabled";
>  			};
>  
>  			frame@f9025000 {
>  				frame-number = <3>;
> -				interrupts = <0 11 0x4>;
> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>  				reg = <0xf9025000 0x1000>;
>  				status = "disabled";
>  			};
>  
>  			frame@f9026000 {
>  				frame-number = <4>;
> -				interrupts = <0 12 0x4>;
> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>  				reg = <0xf9026000 0x1000>;
>  				status = "disabled";
>  			};
>  
>  			frame@f9027000 {
>  				frame-number = <5>;
> -				interrupts = <0 13 0x4>;
> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>  				reg = <0xf9027000 0x1000>;
>  				status = "disabled";
>  			};
>  
>  			frame@f9028000 {
>  				frame-number = <6>;
> -				interrupts = <0 14 0x4>;
> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>  				reg = <0xf9028000 0x1000>;
>  				status = "disabled";
>  			};
> @@ -404,13 +407,13 @@
>  			#gpio-cells = <2>;
>  			interrupt-controller;
>  			#interrupt-cells = <2>;
> -			interrupts = <0 208 0>;
> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>  		};
>  
>  		blsp2_uart2: serial@f995e000 {
>  			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>  			reg = <0xf995e000 0x1000>;
> -			interrupts = <0 114 0x0>;
> +			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
>  			clock-names = "core", "iface";
>  			status = "disabled";
> @@ -420,7 +423,7 @@
>  			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
>  			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
>  			reg-names = "hc_mem", "core_mem";
> -			interrupts = <0 123 0>, <0 138 0>;
> +			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "hc_irq", "pwr_irq";
>  			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
>  				 <&gcc GCC_SDCC1_AHB_CLK>,
> @@ -433,7 +436,7 @@
>  			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
>  			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
>  			reg-names = "hc_mem", "core_mem";
> -			interrupts = <0 125 0>, <0 221 0>;
> +			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "hc_irq", "pwr_irq";
>  			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
>  				 <&gcc GCC_SDCC2_AHB_CLK>,
> @@ -449,7 +452,7 @@
>  			      <0xfc4cb000 0x1000>,
>  			      <0xfc4ca000 0x1000>;
>  			interrupt-names = "periph_irq";
> -			interrupts = <0 190 0>;
> +			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
>  			qcom,ee = <0>;
>  			qcom,channel = <0>;
>  			#address-cells = <2>;
> @@ -463,7 +466,7 @@
>  		compatible = "qcom,smd";
>  
>  		rpm {
> -			interrupts = <0 168 1>;
> +			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
>  			qcom,ipc = <&apcs 8 0>;
>  			qcom,smd-edge = <15>;
>  
> --
> 2.24.0



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux