Hi Rob, sorry for the delay. I wanted to wait for v5.5-rc1 and it did take longer... > Am 05.12.2019 um 18:01 schrieb Rob Herring <robh@xxxxxxxxxx>: > > On Sun, Nov 24, 2019 at 12:40:21PM +0100, H. Nikolaus Schaller wrote: >> The Imagination PVR/SGX GPU is part of several SoC from >> multiple vendors, e.g. TI OMAP, Ingenic JZ4780, Intel Poulsbo >> and others. >> >> With this binding, we describe how the SGX processor is >> interfaced to the SoC (registers, interrupt etc.). >> >> In most cases, Clock, Reset and power management is handled >> by a parent node or elsewhere. >> >> Tested by make dt_binding_check dtbs_check >> >> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> >> --- >> .../devicetree/bindings/gpu/img,pvrsgx.yaml | 83 +++++++++++++++++++ >> 1 file changed, 83 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/gpu/img,pvrsgx.yaml >> >> diff --git a/Documentation/devicetree/bindings/gpu/img,pvrsgx.yaml b/Documentation/devicetree/bindings/gpu/img,pvrsgx.yaml >> new file mode 100644 >> index 000000000000..fe206a53cbe1 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/gpu/img,pvrsgx.yaml >> @@ -0,0 +1,83 @@ >> +# SPDX-License-Identifier: GPL-2.0 > > Dual license new bindings: (GPL-2.0-only OR BSD-2-Clause) What are the consequences? > >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/gpu/img,pvrsgx.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Imagination PVR/SGX GPU >> + >> +maintainers: >> + - H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> >> + >> +description: |+ >> + This binding describes the Imagination SGX5 series of 3D accelerators which >> + are found in several different SoC like TI OMAP, Sitara, Ingenic JZ4780, >> + Allwinner A83, and Intel Poulsbo and CedarView and more. >> + >> + For an almost complete list see: https://en.wikipedia.org/wiki/PowerVR#Implementations >> + >> + Only the Imagination SGX530, SGX540 and SGX544 GPUs are currently covered by >> + this binding but the extension of the pattern is straightforward. >> + >> + The SGX node is usually a child node of some DT node belonging to the SoC >> + which handles clocks, reset and general address space mapping of the SGX >> + register area. >> + >> +properties: >> + compatible: >> + enum: >> + # BeagleBoard ABC, OpenPandora 600MHz > > I'd expect compatibles to be per SoC, not per board. Yes. The boards are examples I can test, but any board with the same SoC should work. I have added "Example: " in front of all these comments. > >> + - ti,omap3-sgx530-121, img,sgx530-121, img,sgx530, img,sgx5 > > 4 compatibles is probably a bit much. Are there not any version or > feature registers that some of this could be detected? Well, there are hints that they exist but there is no good documentation about it. This means that at the moment the user-space must be able to identify the correct blobs that are to be used for a specific SoC. And we need different variants compiled as .ko and loaded on demand. The first one is also used to match different .ko builds from the same source tree with different macro definitions for the individual SoC. It may be possible that we end up in a more generic driver that only matches on one of the second to fourth compatible record, and asks runtime API about the SoC, but at the moment this does not exist. > If there are, I'd > assume the middle 2 strings could be dropped. If not, drop the last one > and just match on the 3rd string. It's not a long list. The fourth one is intended to be able distinguish between sgx5 and sgx6. I also found that I have not defined it in most of the device tree patches. But yes, we can drop it since AFAIK there are no activities for sgx6. And if they start, we can update bindings and boards. > >> + # BeagleBoard XM, GTA04, OpenPandora 1GHz >> + - ti,omap3-sgx530-125, img,sgx530-125, img,sgx530, img,sgx5 >> + # BeagleBone Black >> + - ti,am3352-sgx530-125, img,sgx530-125, img,sgx530, img,sgx5 >> + # Pandaboard, Pandaboard ES >> + - ti,omap4-sgx540-120, img,sgx540-120, img,sgx540, img,sgx5 >> + - ti,omap4-sgx544-112, img,sgx544-112, img,sgx544, img,sgx5 >> + # OMAP5 UEVM, Pyra Handheld >> + - ti,omap5-sgx544-116, img,sgx544-116, img,sgx544, img,sgx5 >> + - ti,dra7-sgx544-116, img,sgx544-116, img,sgx544, img,sgx5 >> + # CI20 >> + - ingenic,jz4780-sgx540-120, img,sgx540-120, img,sgx540, img,sgx5 >> + # the following entries are not validated with real hardware >> + # more TI >> + - ti,am3517-sgx530-125, img,sgx530-125, img,sgx530, img,sgx5 >> + - ti,am4-sgx530-125, img,sgx530-125, img,sgx530, img,sgx5 >> + - ti,ti81xx-sgx530-125, img,sgx530-125, img,sgx530, img,sgx5 >> + # Banana-Pi-M3 (Allwinner A83T) >> + - allwinner,sun8i-a83t-sgx544-116, img,sgx544-116, img,sgx544, img,sgx5 >> + # Atom Z5xx >> + - intel,poulsbo-gma500-sgx535, img,sgx535-116, img,sgx535, img,sgx5 >> + # Atom Z24xx >> + - intel,medfield-gma-sgx540, img,sgx540-116, img,sgx540, img,sgx5 >> + # Atom N2600, D2500 >> + - intel,cedarview-gma3600-sgx545, img,sgx545-116, img,sgx545, img,sgx5 >> + >> + reg: >> + maxItems: 1 >> + description: physical base address and length of the register area > > No need to give a generic description of a standard property. Ok. Dropped. > >> + >> + interrupts: >> + maxItems: 1 >> + description: interrupt line from SGX subsystem to core processor > > Same here. Ok. Dropped. > >> + >> + clocks: >> + description: optional clocks > > Need to define how many and what they are. Or drop until you know. It differs depending on the integration of the SoC. OMAP does not need any clock defintions on the gpu node (clocks are handled by sysc parent) while JZ4780 needs one (at least in the v3.18 vendor kernel with working SGX). > >> + >> +required: >> + - compatible >> + - reg >> + - interrupts > > Add: > > additionalProperties: false Ok. > >> + >> +examples: >> + - |+ >> + #include <dt-bindings/interrupt-controller/arm-gic.h> >> + >> + gpu@fe00 { >> + compatible = "ti,omap-omap5-sgx544-116", "img,sgx544-116", "img,sgx544", "img,sgx5"; >> + reg = <0xfe00 0x200>; >> + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; >> + }; >> + >> +... >> -- >> 2.23.0 >> [PATCH v4] coming. BR and thanks, Nikolaus
