DT properties dual-lvds-even-pixels and dual-lvds-odd-pixels
can be used to work out if the driver needs to swap even
and odd pixels around.
This patch makes use of the return value from function
drm_of_lvds_get_dual_link_pixel_order to determine if we
need to swap odd and even pixels around for things to work
properly.
The dual_link boolean field from struct rcar_lvds is not
sufficient to describe the type of LVDS link anymore, since
we now have information related to pixel order, therefore
rename it to link_type and repurpose its usage to fit the
new requirements.
Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
v5->v6:
* Renamed dual_link to link_type and reworked its usage
v4->v5:
* Addressed comments from Laurent's review
v3->v4:
* New patch extracted from patch:
"drm: rcar-du: lvds: Add dual-LVDS panels support"
---
drivers/gpu/drm/rcar-du/rcar_lvds.c | 77 ++++++++++++++++++++++++++++---------
1 file changed, 58 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.c b/drivers/gpu/drm/rcar-du/rcar_lvds.c
index fdbd36b..8ffa4fb 100644
--- a/drivers/gpu/drm/rcar-du/rcar_lvds.c
+++ b/drivers/gpu/drm/rcar-du/rcar_lvds.c
@@ -37,6 +37,12 @@ enum rcar_lvds_mode {
RCAR_LVDS_MODE_VESA = 4,
};
+enum rcar_lvds_link_type {
+ RCAR_LVDS_SINGLE_LINK = 0,
+ RCAR_LVDS_DUAL_LINK_EVEN_ODD_PIXELS = 1,
+ RCAR_LVDS_DUAL_LINK_ODD_EVEN_PIXELS = 2,
+};
+
#define RCAR_LVDS_QUIRK_LANES BIT(0) /* LVDS lanes 1 and 3 inverted */
#define RCAR_LVDS_QUIRK_GEN3_LVEN BIT(1) /* LVEN bit needs to be set on R8A77970/R8A7799x */
#define RCAR_LVDS_QUIRK_PWD BIT(2) /* PWD bit available (all of Gen3 but E3) */
@@ -67,7 +73,7 @@ struct rcar_lvds {
} clocks;
struct drm_bridge *companion;
- bool dual_link;
+ enum rcar_lvds_link_type link_type;
};
#define bridge_to_rcar_lvds(b) \
@@ -456,7 +462,7 @@ static void __rcar_lvds_atomic_enable(struct drm_bridge *bridge,
return;
/* Enable the companion LVDS encoder in dual-link mode. */
- if (lvds->dual_link && lvds->companion)
+ if (lvds->link_type != RCAR_LVDS_SINGLE_LINK && lvds->companion)
__rcar_lvds_atomic_enable(lvds->companion, state, crtc,
connector);
@@ -482,19 +488,38 @@ static void __rcar_lvds_atomic_enable(struct drm_bridge *bridge,
rcar_lvds_write(lvds, LVDCHCR, lvdhcr);
if (lvds->info->quirks & RCAR_LVDS_QUIRK_DUAL_LINK) {
- /*
- * Configure vertical stripe based on the mode of operation of
- * the connected device.
- */
- rcar_lvds_write(lvds, LVDSTRIPE,
- lvds->dual_link ? LVDSTRIPE_ST_ON : 0);
+ u32 lvdstripe = 0;
+
+ if (lvds->link_type != RCAR_LVDS_SINGLE_LINK) {
+ /*
+ * By default we generate even pixels from the primary
+ * encoder and odd pixels from the companion encoder.
+ * Swap pixels around if the sink requires odd pixels
+ * from the primary encoder and even pixels from the
+ * companion encoder.
+ */
+ bool swap_pixels = lvds->link_type ==
+ RCAR_LVDS_DUAL_LINK_ODD_EVEN_PIXELS;
+
+ /*
+ * Configure vertical stripe since we are dealing with
+ * an LVDS dual-link connection.
+ *
+ * ST_SWAP is reserved for the companion encoder, only
+ * set it in the primary encoder.
+ */
+ lvdstripe = LVDSTRIPE_ST_ON
+ | (lvds->companion && swap_pixels ?
+ LVDSTRIPE_ST_SWAP : 0);
+ }
+ rcar_lvds_write(lvds, LVDSTRIPE, lvdstripe);
}
/*
* PLL clock configuration on all instances but the companion in
* dual-link mode.
*/
- if (!lvds->dual_link || lvds->companion) {
+ if (lvds->link_type == RCAR_LVDS_SINGLE_LINK || lvds->companion) {
const struct drm_crtc_state *crtc_state =
drm_atomic_get_new_crtc_state(state, crtc);
const struct drm_display_mode *mode =
@@ -592,7 +617,7 @@ static void rcar_lvds_atomic_disable(struct drm_bridge *bridge,
rcar_lvds_write(lvds, LVDPLLCR, 0);
/* Disable the companion LVDS encoder in dual-link mode. */
- if (lvds->dual_link && lvds->companion)
+ if (lvds->link_type != RCAR_LVDS_SINGLE_LINK && lvds->companion)
lvds->companion->funcs->atomic_disable(lvds->companion, state);
clk_disable_unprepare(lvds->clocks.mod);
@@ -666,7 +691,7 @@ bool rcar_lvds_dual_link(struct drm_bridge *bridge)
{
struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
- return lvds->dual_link;
+ return lvds->link_type != RCAR_LVDS_SINGLE_LINK;
}
EXPORT_SYMBOL_GPL(rcar_lvds_dual_link);
@@ -712,17 +737,28 @@ static int rcar_lvds_parse_dt_companion(struct rcar_lvds *lvds)
of_node_put(port0);
of_node_put(port1);
- if (dual_link >= DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS)
- lvds->dual_link = true;
- else if (lvds->next_bridge && lvds->next_bridge->timings)
+ switch (dual_link) {
+ case DRM_LVDS_DUAL_LINK_ODD_EVEN_PIXELS:
+ lvds->link_type = RCAR_LVDS_DUAL_LINK_ODD_EVEN_PIXELS;
+ break;
+ case DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS:
+ lvds->link_type = RCAR_LVDS_DUAL_LINK_EVEN_ODD_PIXELS;
+ break;
+ default:
/*
* Early dual-link bridge specific implementations populate the
- * timings field of drm_bridge, read the dual_link flag off the
- * bridge directly for backward compatibility.
+ * timings field of drm_bridge. If the flag is set, we assume
+ * that we are expected to generate even pixels from the primary
+ * encoder, and odd pixels from the companion encoder.
*/
- lvds->dual_link = lvds->next_bridge->timings->dual_link;
+ if (lvds->next_bridge && lvds->next_bridge->timings &&
+ lvds->next_bridge->timings->dual_link)
+ lvds->link_type = RCAR_LVDS_DUAL_LINK_EVEN_ODD_PIXELS;
+ else
+ lvds->link_type = RCAR_LVDS_SINGLE_LINK;
+ }
- if (!lvds->dual_link) {
+ if (lvds->link_type == RCAR_LVDS_SINGLE_LINK) {
dev_dbg(dev, "Single-link configuration detected\n");
goto done;
}
@@ -737,6 +773,9 @@ static int rcar_lvds_parse_dt_companion(struct rcar_lvds *lvds)
"Dual-link configuration detected (companion encoder %pOF)\n",
companion);
+ if (lvds->link_type == RCAR_LVDS_DUAL_LINK_ODD_EVEN_PIXELS)
+ dev_dbg(dev, "Data swapping required\n");
+
/*
* FIXME: We should not be messing with the companion encoder private
* data from the primary encoder, we should rather let the companion
@@ -747,7 +786,7 @@ static int rcar_lvds_parse_dt_companion(struct rcar_lvds *lvds)
* for the time being.
*/
companion_lvds = bridge_to_rcar_lvds(lvds->companion);
- companion_lvds->dual_link = true;
+ companion_lvds->link_type = lvds->link_type;
done:
of_node_put(companion);
--
2.7.4
