Re: [PATCH v11 14/14] hwmon: Add PECI dimmtemp driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Guenter,

On 12/12/2019 10:32 PM, Guenter Roeck wrote:
On 12/11/19 11:46 AM, Jae Hyun Yoo wrote:
This commit adds PECI dimmtemp hwmon driver.

Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
Cc: Jean Delvare <jdelvare@xxxxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxx>
Cc: Andrew Jeffery <andrew@xxxxxxxx>
Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Cc: Jason M Biils <jason.m.bills@xxxxxxxxxxxxxxx>
Cc: Joel Stanley <joel@xxxxxxxxx>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
Cc: Andrew Lunn <andrew@xxxxxxx>
Cc: Stef van Os <stef.van.os@xxxxxxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
Reviewed-by: Haiyue Wang <haiyue.wang@xxxxxxxxxxxxxxx>
Reviewed-by: James Feist <james.feist@xxxxxxxxxxxxxxx>
Reviewed-by: Vernon Mauery <vernon.mauery@xxxxxxxxxxxxxxx>
Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
Changes since v10:
- Added Skylake Xeon D support.
- Added max and crit properties for temperature threshold checking.
- Fixed minor bugs and style issues.

  drivers/hwmon/Kconfig         |  14 ++
  drivers/hwmon/Makefile        |   1 +
  drivers/hwmon/peci-dimmtemp.c | 393 ++++++++++++++++++++++++++++++++++
  3 files changed, 408 insertions(+)
  create mode 100644 drivers/hwmon/peci-dimmtemp.c

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index b6604759579c..d3370fbab40c 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1363,6 +1363,20 @@ config SENSORS_PECI_CPUTEMP
        This driver can also be built as a module. If so, the module
        will be called peci-cputemp.
+config SENSORS_PECI_DIMMTEMP
+    tristate "PECI DIMM temperature monitoring client"
+    depends on PECI
+    select MFD_INTEL_PECI_CLIENT
+    help
+      If you say yes here you get support for the generic Intel PECI hwmon +      driver which provides Digital Thermal Sensor (DTS) thermal readings of
+      DIMM components that are accessible using the PECI Client Command
+      Suite via the processor PECI client.
+      Check <file:Documentation/hwmon/peci-dimmtemp.rst> for details.
+
+      This driver can also be built as a module. If so, the module
+      will be called peci-dimmtemp.
+
  source "drivers/hwmon/pmbus/Kconfig"
  config SENSORS_PWM_FAN
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index d6fea48697af..4015c4b60bf4 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -145,6 +145,7 @@ obj-$(CONFIG_SENSORS_PC87360)    += pc87360.o
  obj-$(CONFIG_SENSORS_PC87427)    += pc87427.o
  obj-$(CONFIG_SENSORS_PCF8591)    += pcf8591.o
  obj-$(CONFIG_SENSORS_PECI_CPUTEMP)    += peci-cputemp.o
+obj-$(CONFIG_SENSORS_PECI_DIMMTEMP)    += peci-dimmtemp.o
  obj-$(CONFIG_SENSORS_POWR1220)  += powr1220.o
  obj-$(CONFIG_SENSORS_PWM_FAN)    += pwm-fan.o
  obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON)    += raspberrypi-hwmon.o
diff --git a/drivers/hwmon/peci-dimmtemp.c b/drivers/hwmon/peci-dimmtemp.c
new file mode 100644
index 000000000000..974f453f9366
--- /dev/null
+++ b/drivers/hwmon/peci-dimmtemp.c
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018-2019 Intel Corporation
+
+#include <linux/hwmon.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include "peci-hwmon.h"
+
+#define DIMM_MASK_CHECK_DELAY_JIFFIES  msecs_to_jiffies(5000)
+#define DIMM_MASK_CHECK_RETRY_MAX      60 /* 60 x 5 secs = 5 minutes */
+
+struct peci_dimmtemp {
+    struct peci_client_manager *mgr;
+    struct device *dev;
+    char name[PECI_NAME_SIZE];
+    const struct cpu_gen_info *gen_info;
+    struct workqueue_struct *work_queue;
+    struct delayed_work work_handler;
+    struct peci_sensor_data temp[DIMM_NUMS_MAX];
+    long temp_max[DIMM_NUMS_MAX];
+    long temp_crit[DIMM_NUMS_MAX];
+    u32 dimm_mask;
+    int retry_count;
+    u32 temp_config[DIMM_NUMS_MAX + 1];
+    struct hwmon_channel_info temp_info;
+    const struct hwmon_channel_info *info[2];
+    struct hwmon_chip_info chip;
+};
+
+static const char *dimmtemp_label[CHAN_RANK_MAX][DIMM_IDX_MAX] = {
+    { "DIMM A1", "DIMM A2", "DIMM A3" },
+    { "DIMM B1", "DIMM B2", "DIMM B3" },
+    { "DIMM C1", "DIMM C2", "DIMM C3" },
+    { "DIMM D1", "DIMM D2", "DIMM D3" },
+    { "DIMM E1", "DIMM E2", "DIMM E3" },
+    { "DIMM F1", "DIMM F2", "DIMM F3" },
+    { "DIMM G1", "DIMM G2", "DIMM G3" },
+    { "DIMM H1", "DIMM H2", "DIMM H3" },
+};
+
+static inline int read_ddr_dimm_temp_config(struct peci_dimmtemp *priv,
+                        int chan_rank,
+                        u8 *cfg_data)
+{
+    return peci_client_read_package_config(priv->mgr,
+                           PECI_MBX_INDEX_DDR_DIMM_TEMP,
+                           chan_rank, cfg_data);
+}
+
+static int get_dimm_temp(struct peci_dimmtemp *priv, int dimm_no)
+{
+    int dimm_order = dimm_no % priv->gen_info->dimm_idx_max;
+    int chan_rank = dimm_no / priv->gen_info->dimm_idx_max;
+    struct peci_rd_pci_cfg_local_msg rp_msg;
+    u8  cfg_data[4];
+    int ret;
+
+    if (!peci_sensor_need_update(&priv->temp[dimm_no]))
+        return 0;
+
+    ret = read_ddr_dimm_temp_config(priv, chan_rank, cfg_data);
+    if (ret)
+        return ret;
+
+    priv->temp[dimm_no].value = cfg_data[dimm_order] * 1000;
+
+    switch (priv->gen_info->model) {
+    case INTEL_FAM6_SKYLAKE_X:
+        rp_msg.addr = priv->mgr->client->addr;
+        rp_msg.bus = 2;
+        /*
+         * Device 10, Function 2: IMC 0 channel 0 -> rank 0
+         * Device 10, Function 6: IMC 0 channel 1 -> rank 1
+         * Device 11, Function 2: IMC 0 channel 2 -> rank 2
+         * Device 12, Function 2: IMC 1 channel 0 -> rank 3
+         * Device 12, Function 6: IMC 1 channel 1 -> rank 4
+         * Device 13, Function 2: IMC 1 channel 2 -> rank 5
+         */
+        rp_msg.device = 10 + chan_rank / 3 * 2 +
+                 (chan_rank % 3 == 2 ? 1 : 0);
+        rp_msg.function = chan_rank % 3 == 1 ? 6 : 2;
+        rp_msg.reg = 0x120 + dimm_order * 4;
+        rp_msg.rx_len = 4;
+
+        ret = peci_command(priv->mgr->client->adapter,
+                   PECI_CMD_RD_PCI_CFG_LOCAL, &rp_msg);
+        if (rp_msg.cc != PECI_DEV_CC_SUCCESS)
+            ret = -EAGAIN;
+        if (ret)
+            return ret;
+
+        priv->temp_max[dimm_no] = rp_msg.pci_config[1] * 1000;
+        priv->temp_crit[dimm_no] = rp_msg.pci_config[2] * 1000;
+        break;
+    case INTEL_FAM6_SKYLAKE_XD:
+        rp_msg.addr = priv->mgr->client->addr;
+        rp_msg.bus = 2;
+        /*
+         * Device 10, Function 2: IMC 0 channel 0 -> rank 0
+         * Device 10, Function 6: IMC 0 channel 1 -> rank 1
+         * Device 12, Function 2: IMC 1 channel 0 -> rank 2
+         * Device 12, Function 6: IMC 1 channel 1 -> rank 3
+         */
+        rp_msg.device = 10 + chan_rank / 2 * 2;
+        rp_msg.function = (chan_rank % 2) ? 6 : 2;
+        rp_msg.reg = 0x120 + dimm_order * 4;
+        rp_msg.rx_len = 4;
+
+        ret = peci_command(priv->mgr->client->adapter,
+                   PECI_CMD_RD_PCI_CFG_LOCAL, &rp_msg);
+        if (rp_msg.cc != PECI_DEV_CC_SUCCESS)
+            ret = -EAGAIN;
+        if (ret)
+            return ret;
+
+        priv->temp_max[dimm_no] = rp_msg.pci_config[1] * 1000;
+        priv->temp_crit[dimm_no] = rp_msg.pci_config[2] * 1000;
+        break;
+    case INTEL_FAM6_HASWELL_X:
+    case INTEL_FAM6_BROADWELL_X:
+        rp_msg.addr = priv->mgr->client->addr;
+        rp_msg.bus = 1;
+        /*
+         * Device 20, Function 0: IMC 0 channel 0 -> rank 0
+         * Device 20, Function 1: IMC 0 channel 1 -> rank 1
+         * Device 21, Function 0: IMC 0 channel 2 -> rank 2
+         * Device 21, Function 1: IMC 0 channel 3 -> rank 3
+         * Device 23, Function 0: IMC 1 channel 0 -> rank 4
+         * Device 23, Function 1: IMC 1 channel 1 -> rank 5
+         * Device 24, Function 0: IMC 1 channel 2 -> rank 6
+         * Device 24, Function 1: IMC 1 channel 3 -> rank 7
+         */
+        rp_msg.device = 20 + chan_rank / 2 + chan_rank / 4;
+        rp_msg.function = chan_rank % 2;
+        rp_msg.reg = 0x120 + dimm_order * 4;
+        rp_msg.rx_len = 4;
+
+        ret = peci_command(priv->mgr->client->adapter,
+                   PECI_CMD_RD_PCI_CFG_LOCAL, &rp_msg);
+        if (rp_msg.cc != PECI_DEV_CC_SUCCESS)
+            ret = -EAGAIN;
+        if (ret)
+            return ret;
+
+        priv->temp_max[dimm_no] = rp_msg.pci_config[1] * 1000;
+        priv->temp_crit[dimm_no] = rp_msg.pci_config[2] * 1000;
+        break;
+    default:
+        return -EOPNOTSUPP;
It looks like the sensors are created even on unsupported platforms,
which would generate error messages whenever someone tries to read
the attributes.

There should be some code early on checking this, and the driver
should not even instantiate if the CPU model is not supported.
Actually, this 'default' case will not be happened because this driver
will be registered only when the CPU model is supported. The CPU model
checking code is in 'intel-peci-client.c' which is [11/14] of this
patch set.

+    }
+
+    peci_sensor_mark_updated(&priv->temp[dimm_no]);
+
+    return 0;
+}
+
+static int dimmtemp_read_string(struct device *dev,
+                enum hwmon_sensor_types type,
+                u32 attr, int channel, const char **str)
+{
+    struct peci_dimmtemp *priv = dev_get_drvdata(dev);
+    u32 dimm_idx_max = priv->gen_info->dimm_idx_max;
+    int chan_rank, dimm_idx;
+
+    if (attr != hwmon_temp_label)
+        return -EOPNOTSUPP;
+
+    chan_rank = channel / dimm_idx_max;
+    dimm_idx = channel % dimm_idx_max;
+    *str = dimmtemp_label[chan_rank][dimm_idx];
Similar to the other patch, I am concerned that this can end up setting 
*str
to NULL at some point in the future.
Okay. I'll make dynamic label string table generation code for it as
well.

+
+    return 0;
+}
+
+static int dimmtemp_read(struct device *dev, enum hwmon_sensor_types type,
+             u32 attr, int channel, long *val)
+{
+    struct peci_dimmtemp *priv = dev_get_drvdata(dev);
+    int ret;
+
+    ret = get_dimm_temp(priv, channel);
+    if (ret)
+        return ret;
+
+    switch (attr) {
+    case hwmon_temp_input:
+        *val = priv->temp[channel].value;
+        break;
+    case hwmon_temp_max:
+        *val = priv->temp_max[channel];
+        break;
+    case hwmon_temp_crit:
+        *val = priv->temp_crit[channel];
+        break;
+    default:
+        ret = -EOPNOTSUPP;
+        break;
+    }
+
+    return ret;
+}
+
+static umode_t dimmtemp_is_visible(const void *data,
+                   enum hwmon_sensor_types type,
+                   u32 attr, int channel)
+{
+    const struct peci_dimmtemp *priv = data;
+
+    if (priv->temp_config[channel] & BIT(attr) &&
+        priv->dimm_mask & BIT(channel))
+        return 0444;
+
+    return 0;
+}
+
+static const struct hwmon_ops dimmtemp_ops = {
+    .is_visible = dimmtemp_is_visible,
+    .read_string = dimmtemp_read_string,
+    .read = dimmtemp_read,
+};
+
+static int check_populated_dimms(struct peci_dimmtemp *priv)
+{
+    u32 chan_rank_max = priv->gen_info->chan_rank_max;
+    u32 dimm_idx_max = priv->gen_info->dimm_idx_max;
+    int chan_rank, dimm_idx;
+    u8  cfg_data[4];
+
+    for (chan_rank = 0; chan_rank < chan_rank_max; chan_rank++) {
+        int ret;
+
+        ret = read_ddr_dimm_temp_config(priv, chan_rank, cfg_data);
+        if (ret) {
+            priv->dimm_mask = 0;
+            return ret;
+        }
+
+        for (dimm_idx = 0; dimm_idx < dimm_idx_max; dimm_idx++)
+            if (cfg_data[dimm_idx])
+                priv->dimm_mask |= BIT(chan_rank *
+                               dimm_idx_max +
+                               dimm_idx);
+    }
+
+    if (!priv->dimm_mask)
+        return -EAGAIN;
+
+    dev_dbg(priv->dev, "Scanned populated DIMMs: 0x%x\n", priv->dimm_mask);
+
+    return 0;
+}
+
+static int create_dimm_temp_info(struct peci_dimmtemp *priv)
+{
+    int ret, i, config_idx, channels;
+    struct device *hwmon_dev;
+
+    ret = check_populated_dimms(priv);
+    if (ret) {
+        if (ret == -EAGAIN) {
+            if (priv->retry_count < DIMM_MASK_CHECK_RETRY_MAX) {
+                queue_delayed_work(priv->work_queue,
+                           &priv->work_handler,
+                         DIMM_MASK_CHECK_DELAY_JIFFIES);
+                priv->retry_count++;
+                dev_dbg(priv->dev,
+                    "Deferred DIMM temp info creation\n");
+            } else {
+                dev_err(priv->dev,
+                    "Timeout DIMM temp info creation\n");
+                ret = -ETIMEDOUT;
+            }
+        }
+
+        return ret;
+    }
+
+    channels = priv->gen_info->chan_rank_max *
+           priv->gen_info->dimm_idx_max;
+    for (i = 0, config_idx = 0; i < channels; i++)
+        if (priv->dimm_mask & BIT(i))
+            while (i >= config_idx)
+                priv->temp_config[config_idx++] =
+                    HWMON_T_LABEL | HWMON_T_INPUT |
+                    HWMON_T_MAX | HWMON_T_CRIT;
+
+    priv->chip.ops = &dimmtemp_ops;
+    priv->chip.info = priv->info;
+
+    priv->info[0] = &priv->temp_info;
+
+    priv->temp_info.type = hwmon_temp;
+    priv->temp_info.config = priv->temp_config;
+
+    hwmon_dev = devm_hwmon_device_register_with_info(priv->dev,
+                             priv->name,
+                             priv,
+                             &priv->chip,
+                             NULL);
+    ret = PTR_ERR_OR_ZERO(hwmon_dev);
+    if (!ret)
+        dev_dbg(priv->dev, "%s: sensor '%s'\n",
+            dev_name(hwmon_dev), priv->name);
+
Any chance to make this consistent with the other driver ?
Will change this to:

if (IS_ERR(hwmon_dev)) {
	dev_err(&priv->dev, "Failed to register hwmon device\n");
	return PTR_ERR(hwmon_dev);
}

+    return ret;
+}
+
+static void create_dimm_temp_info_delayed(struct work_struct *work)
+{
+    struct delayed_work *dwork = to_delayed_work(work);
+    struct peci_dimmtemp *priv = container_of(dwork, struct peci_dimmtemp,
+                          work_handler);
+    int ret;
+
+    ret = create_dimm_temp_info(priv);
+    if (ret && ret != -EAGAIN)
+        dev_dbg(priv->dev, "Failed to create DIMM temp info\n");
+}
+
+static int peci_dimmtemp_probe(struct platform_device *pdev)
+{
+    struct peci_client_manager *mgr = dev_get_drvdata(pdev->dev.parent);
+    struct device *dev = &pdev->dev;
+    struct peci_dimmtemp *priv;
+    int ret;
+
+    if ((mgr->client->adapter->cmd_mask &
+        (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) !=
+        (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG)))
+        return -ENODEV;
+
+    priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+    if (!priv)
+        return -ENOMEM;
+
+    dev_set_drvdata(dev, priv);
+    priv->mgr = mgr;
+    priv->dev = dev;
+    priv->gen_info = mgr->gen_info;
+
+    snprintf(priv->name, PECI_NAME_SIZE, "peci_dimmtemp.cpu%d",
+         priv->mgr->client->addr - PECI_BASE_ADDR);
+
+    priv->work_queue = alloc_ordered_workqueue(priv->name, 0);
+    if (!priv->work_queue)
+        return -ENOMEM;
+
+    INIT_DELAYED_WORK(&priv->work_handler, create_dimm_temp_info_delayed);
+
+    ret = create_dimm_temp_info(priv);
+    if (ret && ret != -EAGAIN) {
+        dev_err(dev, "Failed to create DIMM temp info\n");
Does this generate error messages if there are no DIMMS ?
Yes, this error message will be printed out once if it meets a timeout
in DIMM scanning when there is no DIMM.

Thanks a lot for your review!

-Jae

+        goto err_free_wq;
+    }
+
+    return 0;
+
+err_free_wq:
+    destroy_workqueue(priv->work_queue);
+    return ret;
+}
+
+static int peci_dimmtemp_remove(struct platform_device *pdev)
+{
+    struct peci_dimmtemp *priv = dev_get_drvdata(&pdev->dev);
+
+    cancel_delayed_work_sync(&priv->work_handler);
+    destroy_workqueue(priv->work_queue);
+
+    return 0;
+}
+
+static const struct platform_device_id peci_dimmtemp_ids[] = {
+    { .name = "peci-dimmtemp", .driver_data = 0 },
+    { }
+};
+MODULE_DEVICE_TABLE(platform, peci_dimmtemp_ids);
+
+static struct platform_driver peci_dimmtemp_driver = {
+    .probe    = peci_dimmtemp_probe,
+    .remove   = peci_dimmtemp_remove,
+    .id_table = peci_dimmtemp_ids,
+    .driver   = { .name = KBUILD_MODNAME, },
+};
+module_platform_driver(peci_dimmtemp_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("PECI dimmtemp driver");
+MODULE_LICENSE("GPL v2");




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux