Re: [PATCH v11 11/14] mfd: intel-peci-client: Add Intel PECI client driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 11 Dec 2019, Jae Hyun Yoo wrote:

> This commit adds Intel PECI client driver.
> 
> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
> Cc: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Andrew Jeffery <andrew@xxxxxxxx>
> Cc: James Feist <james.feist@xxxxxxxxxxxxxxx>
> Cc: Jason M Biils <jason.m.bills@xxxxxxxxxxxxxxx>
> Cc: Joel Stanley <joel@xxxxxxxxx>
> Cc: Vernon Mauery <vernon.mauery@xxxxxxxxxxxxxxx>
> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
> ---
> Changes since v10:
> - Fixed minor style issues.
> 
>  drivers/mfd/Kconfig                   |  17 +++
>  drivers/mfd/Makefile                  |   1 +
>  drivers/mfd/intel-peci-client.c       | 149 ++++++++++++++++++++++++++
>  include/linux/mfd/intel-peci-client.h | 117 ++++++++++++++++++++
>  4 files changed, 284 insertions(+)
>  create mode 100644 drivers/mfd/intel-peci-client.c
>  create mode 100644 include/linux/mfd/intel-peci-client.h
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 420900852166..7022e54a4703 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -632,6 +632,23 @@ config MFD_INTEL_MSIC
>  	  Passage) chip. This chip embeds audio, battery, GPIO, etc.
>  	  devices used in Intel Medfield platforms.
>  
> +config MFD_INTEL_PECI_CLIENT
> +	tristate "Intel PECI client"
> +	depends on (PECI || COMPILE_TEST)
> +	select MFD_CORE
> +	help
> +	  If you say yes to this option, support will be included for the
> +	  Intel PECI (Platform Environment Control Interface) client. PECI is a
> +	  one-wire bus interface that provides a communication channel from PECI
> +	  clients in Intel processors and chipset components to external
> +	  monitoring or control devices.
> +
> +	  Additional drivers must be enabled in order to use the functionality
> +	  of the device.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called intel-peci-client.
> +
>  config MFD_IPAQ_MICRO
>  	bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
>  	depends on SA1100_H3100 || SA1100_H3600
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index aed99f08739f..91c6fda5cec6 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -211,6 +211,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS)	+= intel-lpss.o
>  obj-$(CONFIG_MFD_INTEL_LPSS_PCI)	+= intel-lpss-pci.o
>  obj-$(CONFIG_MFD_INTEL_LPSS_ACPI)	+= intel-lpss-acpi.o
>  obj-$(CONFIG_MFD_INTEL_MSIC)	+= intel_msic.o
> +obj-$(CONFIG_MFD_INTEL_PECI_CLIENT)	+= intel-peci-client.o
>  obj-$(CONFIG_MFD_PALMAS)	+= palmas.o
>  obj-$(CONFIG_MFD_VIPERBOARD)    += viperboard.o
>  obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
> diff --git a/drivers/mfd/intel-peci-client.c b/drivers/mfd/intel-peci-client.c
> new file mode 100644
> index 000000000000..18bf0af0e09e
> --- /dev/null
> +++ b/drivers/mfd/intel-peci-client.c
> @@ -0,0 +1,149 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018-2019 Intel Corporation
> +
> +#include <linux/bitfield.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/intel-peci-client.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/peci.h>
> +
> +#define CPU_ID_MODEL_MASK      GENMASK(7, 4)
> +#define CPU_ID_FAMILY_MASK     GENMASK(11, 8)
> +#define CPU_ID_EXT_MODEL_MASK  GENMASK(19, 16)
> +#define CPU_ID_EXT_FAMILY_MASK GENMASK(27, 20)
> +
> +#define LOWER_NIBBLE_MASK      GENMASK(3, 0)
> +#define UPPER_NIBBLE_MASK      GENMASK(7, 4)
> +#define LOWER_BYTE_MASK        GENMASK(7, 0)
> +#define UPPER_BYTE_MASK        GENMASK(16, 8)
> +
> +static struct mfd_cell peci_functions[] = {
> +	{ .name = "peci-cputemp", },
> +	{ .name = "peci-dimmtemp", },
> +	/* TODO: Add additional PECI sideband functions into here */

No need for this comment.  It's implied.

> +};
> +
> +static const struct cpu_gen_info cpu_gen_info_table[] = {
> +	{ /* Haswell Xeon */
> +		.family        = 6, /* Family code */

Nit: Why don't you just define the number, instead of feeling the need
to further clarify by providing a comment?

> +		.model         = INTEL_FAM6_HASWELL_X,
> +		.core_max      = CORE_MAX_ON_HSX,
> +		.chan_rank_max = CHAN_RANK_MAX_ON_HSX,
> +		.dimm_idx_max  = DIMM_IDX_MAX_ON_HSX },
> +	{ /* Broadwell Xeon */
> +		.family        = 6, /* Family code */
> +		.model         = INTEL_FAM6_BROADWELL_X,
> +		.core_max      = CORE_MAX_ON_BDX,
> +		.chan_rank_max = CHAN_RANK_MAX_ON_BDX,
> +		.dimm_idx_max  = DIMM_IDX_MAX_ON_BDX },
> +	{ /* Skylake Xeon */
> +		.family        = 6, /* Family code */
> +		.model         = INTEL_FAM6_SKYLAKE_X,
> +		.core_max      = CORE_MAX_ON_SKX,
> +		.chan_rank_max = CHAN_RANK_MAX_ON_SKX,
> +		.dimm_idx_max  = DIMM_IDX_MAX_ON_SKX },
> +	{ /* Skylake Xeon D */
> +		.family        = 6, /* Family code */
> +		.model         = INTEL_FAM6_SKYLAKE_XD,
> +		.core_max      = CORE_MAX_ON_SKXD,
> +		.chan_rank_max = CHAN_RANK_MAX_ON_SKXD,
> +		.dimm_idx_max  = DIMM_IDX_MAX_ON_SKXD },
> +};
> +
> +static int peci_client_get_cpu_gen_info(struct peci_client_manager *priv)
> +{
> +	struct device *dev = &priv->client->dev;
> +	u32 cpu_id;
> +	u16 family;
> +	u8 model;
> +	int ret;
> +	int i;
> +
> +	ret = peci_get_cpu_id(priv->client->adapter, priv->client->addr,
> +			      &cpu_id);
> +	if (ret)
> +		return ret;
> +
> +	family = FIELD_PREP(LOWER_BYTE_MASK,
> +			    FIELD_GET(CPU_ID_FAMILY_MASK, cpu_id)) |
> +		 FIELD_PREP(UPPER_BYTE_MASK,
> +			    FIELD_GET(CPU_ID_EXT_FAMILY_MASK, cpu_id));
> +	model = FIELD_PREP(LOWER_NIBBLE_MASK,
> +			   FIELD_GET(CPU_ID_MODEL_MASK, cpu_id)) |
> +		FIELD_PREP(UPPER_NIBBLE_MASK,
> +			   FIELD_GET(CPU_ID_EXT_MODEL_MASK, cpu_id));
> +
> +	for (i = 0; i < ARRAY_SIZE(cpu_gen_info_table); i++) {
> +		const struct cpu_gen_info *cpu_info = &cpu_gen_info_table[i];
> +
> +		if (family == cpu_info->family && model == cpu_info->model) {
> +			priv->gen_info = cpu_info;
> +			break;
> +		}
> +	}
> +
> +	if (!priv->gen_info) {
> +		dev_err(dev, "Can't support this CPU: 0x%x\n", cpu_id);
> +		ret = -ENODEV;
> +	}
> +
> +	return ret;
> +}
> +
> +static int peci_client_probe(struct peci_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	struct peci_client_manager *priv;
> +	uint cpu_no;
> +	int ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	dev_set_drvdata(dev, priv);
> +	priv->client = client;
> +	cpu_no = client->addr - PECI_BASE_ADDR;
> +
> +	ret = peci_client_get_cpu_gen_info(priv);
> +	if (ret)
> +		return ret;
> +
> +	ret = devm_mfd_add_devices(dev, cpu_no, peci_functions,
> +				   ARRAY_SIZE(peci_functions), NULL, 0, NULL);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to register child devices: %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +#if IS_ENABLED(CONFIG_OF)

#ifdef CONFIG_OF

> +static const struct of_device_id peci_client_of_table[] = {
> +	{ .compatible = "intel,peci-client" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, peci_client_of_table);
> +#endif /* CONFIG_OF */

Please remove this comment.  It doesn't provide anything here.

> +static const struct peci_device_id peci_client_ids[] = {
> +	{ .name = "peci-client" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(peci, peci_client_ids);

Is this a requirement?  If so, why?

We're trying to get rid of unnecessary tables.

Please grep for "probe_new".

> +static struct peci_driver peci_client_driver = {
> +	.probe    = peci_client_probe,
> +	.id_table = peci_client_ids,
> +	.driver   = {
> +		.name           = KBUILD_MODNAME,
> +		.of_match_table = of_match_ptr(peci_client_of_table),
> +	},
> +};
> +module_peci_driver(peci_client_driver);
> +
> +MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("PECI client driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/intel-peci-client.h b/include/linux/mfd/intel-peci-client.h
> new file mode 100644
> index 000000000000..9854303bbc26
> --- /dev/null
> +++ b/include/linux/mfd/intel-peci-client.h
> @@ -0,0 +1,117 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* Copyright (c) 2018-2019 Intel Corporation */
> +
> +#ifndef __LINUX_MFD_INTEL_PECI_CLIENT_H
> +#define __LINUX_MFD_INTEL_PECI_CLIENT_H
> +
> +#include <linux/peci.h>
> +
> +#if IS_ENABLED(CONFIG_X86)
> +#include <asm/intel-family.h>
> +#else
> +/*
> + * Architectures other than x86 cannot include the header file so define these
> + * at here. These are needed for detecting type of client x86 CPUs behind a PECI
> + * connection.
> + */
> +#define INTEL_FAM6_HASWELL_X		0x3F
> +#define INTEL_FAM6_BROADWELL_X		0x4F
> +#define INTEL_FAM6_SKYLAKE_X		0x55
> +#define INTEL_FAM6_SKYLAKE_XD		0x56
> +#endif
> +
> +#define CORE_MAX_ON_HSX        18 /* Max number of cores on Haswell */
> +#define CHAN_RANK_MAX_ON_HSX   8  /* Max number of channel ranks on Haswell */
> +#define DIMM_IDX_MAX_ON_HSX    3  /* Max DIMM index per channel on Haswell */
> +
> +#define CORE_MAX_ON_BDX        24 /* Max number of cores on Broadwell */
> +#define CHAN_RANK_MAX_ON_BDX   4  /* Max number of channel ranks on Broadwell */
> +#define DIMM_IDX_MAX_ON_BDX    3  /* Max DIMM index per channel on Broadwell */
> +
> +#define CORE_MAX_ON_SKX        28 /* Max number of cores on Skylake */
> +#define CHAN_RANK_MAX_ON_SKX   6  /* Max number of channel ranks on Skylake */
> +#define DIMM_IDX_MAX_ON_SKX    2  /* Max DIMM index per channel on Skylake */
> +
> +#define CORE_MAX_ON_SKXD       16 /* Max number of cores on Skylake D */
> +#define CHAN_RANK_MAX_ON_SKXD  2  /* Max number of channel ranks on Skylake D */
> +#define DIMM_IDX_MAX_ON_SKXD   2  /* Max DIMM index per channel on Skylake D */
> +
> +#define CORE_NUMS_MAX          CORE_MAX_ON_SKX
> +#define CHAN_RANK_MAX          CHAN_RANK_MAX_ON_HSX
> +#define DIMM_IDX_MAX           DIMM_IDX_MAX_ON_HSX
> +#define DIMM_NUMS_MAX          (CHAN_RANK_MAX * DIMM_IDX_MAX)
> +
> +/**
> + * struct cpu_gen_info - CPU generation specific information
> + * @family: CPU family ID
> + * @model: CPU model
> + * @core_max: max number of cores
> + * @chan_rank_max: max number of channel ranks
> + * @dimm_idx_max: max number of DIMM indices
> + *
> + * CPU generation specific information to identify maximum number of cores and
> + * DIMM slots.
> + */
> +struct cpu_gen_info {
> +	u16  family;
> +	u8   model;
> +	uint core_max;
> +	uint chan_rank_max;
> +	uint dimm_idx_max;
> +};
> +
> +/**
> + * struct peci_client_manager - PECI client manager information
> + * @client; pointer to the PECI client
> + * @name: PECI client manager name
> + * @gen_info: CPU generation info of the detected CPU
> + *
> + * PECI client manager information for managing PECI sideband functions on a CPU
> + * client.
> + */
> +struct peci_client_manager {
> +	struct peci_client *client;
> +	char name[PECI_NAME_SIZE];
> +	const struct cpu_gen_info *gen_info;
> +};
> +
> +/**
> + * peci_client_read_package_config - read from the Package Configuration Space
> + * @priv: driver private data structure
> + * @index: encoding index for the requested service
> + * @param: parameter to specify the exact data being requested
> + * @data: data buffer to store the result
> + * Context: can sleep
> + *
> + * A generic PECI command that provides read access to the
> + * "Package Configuration Space" that is maintained by the PCU, including
> + * various power and thermal management functions. Typical PCS read services
> + * supported by the processor may include access to temperature data, energy
> + * status, run time information, DIMM temperatures and so on.
> + *
> + * Return: zero on success, else a negative error code.
> + */
> +static inline int
> +peci_client_read_package_config(struct peci_client_manager *priv,
> +				u8 index, u16 param, u8 *data)
> +{
> +	struct peci_rd_pkg_cfg_msg msg;
> +	int ret;
> +
> +	msg.addr = priv->client->addr;
> +	msg.index = index;
> +	msg.param = param;
> +	msg.rx_len = 4;
> +
> +	ret = peci_command(priv->client->adapter, PECI_CMD_RD_PKG_CFG, &msg);
> +	if (msg.cc != PECI_DEV_CC_SUCCESS)
> +		ret = -EAGAIN;
> +	if (ret)
> +		return ret;
> +
> +	memcpy(data, msg.pkg_config, 4);
> +
> +	return 0;
> +}

Where is this function used?

> +#endif /* __LINUX_MFD_INTEL_PECI_CLIENT_H */

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux